How To Make Leather Purse Straps

Make your own leather or vinyl handbag strap with these easy step-by-step instructions.

Contents

I make a lot of bags and sometimes I like to use leather or vinyl straps instead of the cotton fabric I’m using for purses. Buying leather straps can be expensive so making your own will save more money! It takes some practice and patience. The more you work with vinyl and leather, the easier it becomes. These instructions also work on leather and vinyl. Try your new leather strap using this easy tote bag tutorial.Read: how to make leather wallet strapsRule of thumb: These instructions can be adjusted to any strap size. Figure out how wide you want your strap to be, then multiply by 3 and that will be the width you need to cut your leather. For this tutorial, the finished straps are 1 1/2 inches wide. This post contains affiliate links. Please see disclosure for more information.

Required supplies:

  • Imitation leather, leather or vinyl – about 1/2 yard – enough to cut two 4 1/2 inch x 30 inch straps. The picture above shows the straps folded.
  • Cutting mats
  • Rotary cutter
  • Erase ruler
  • Sewing clip
  • Non-stick sewing machine presser foot
  • Pencil mark
  • Suitable topic
  • Sewing machine

Cut fake leather straps

Read more: how to shake herbalife with water Using a cutting mat, clear ruler and rotary cutter, cut two leather or vinyl straps 4 1/2 inches wide by 30 inches long. (The picture above shows the straps folded.)

Mark the width of the wallet strap

20190824 16122220190824 161342Measure 1 1/2 inches from the right edge of one of the purse straps and draw a straight line with a marker. Do the same with the second strap.

See Also  How To Check Transfer Case Fluid

Fold the handle

20190824 161829Fold the left side of the strap onto the blue line. Hold in place with your sewing clips. NOTE: you do not want to use straight pins on leather or vinyl as the pins will leave visible holes.Fold the wallet strap with the stitching clipNow fold the other side of the bag and hold it in place with sewing clips as shown above.

Lucky together

20190824 162532Read more: how to record on iphone xr Using your non-stick presser foot, sew straight about 1/4 inch from edge do not have clips. If you don’t have a non-stick propeller, you can tape the bottom of the propeller, but this doesn’t always work.20190824 162654Sewing using a straight stitch along the side length with clips. Remember to sew in the same direction to keep the strap from curling. An easy way to keep this in mind is to wait until you’re all done for thread trimming to begin. (Hope that makes sense!)20190824 162920You should sew straight along both sides of the faux leather strap. For an extra finishing touch, sew both sides straight to the edge (see image above).20190824 163208The picture above shows what your stitches should look like on the right side of the leather strap. Repeat these steps with the remaining strap.

You have completed!

DIY leather wallet strapNow you’re ready to make your own leather or vinyl handbag strap to add to your tote bag or purse. Good luck! Read more: How to keep white dipped nails from yellowing

Pin for later

DIY leather strap or vinyl wallet

Other Relevant Handbags or Wallet Guides

  • Guide to Key Fob
  • DIY fabric checkbook cover
  • Travel tissue holder
See Also  Pioneer woman caesar salad in a bag

DIY leather strap or vinyl wallet

Last, Wallx.net sent you details about the topic “How To Make Leather Purse Straps❤️️”.Hope with useful information that the article “How To Make Leather Purse Straps” It will help readers to be more interested in “How To Make Leather Purse Straps [ ❤️️❤️️ ]”.

Posts “How To Make Leather Purse Straps” posted by on 2021-10-28 20:59:17. Thank you for reading the article at wallx.net

Rate this post
Back to top button