Dressing is a means of artificially improving the natural process of wearing. Clothes worn in everyday life tend to get dirty faster around cuffs, hems, and collars, fray faster at the knees and elbows, and have stains on the chest and thighs from carrying, spills, and spills. food, leaning against a table, etc. To make an outfit look real, you don’t have to go crazy getting your outfit dirty – you just have to make it look used. likely to experience based on the environment, lifestyle and/or work in which they are engaged. Did this character get through the tunnel? There are probably stains on the knees, elbows, buttocks, and shoulders. Frequently shot? There may be a bullet hole in the jacket or a tear in the sleeve when a shot comes too close. Working with machines? There will be oil stains, grease stains, and possibly rust stains. Running through the woods? There may be small rips or tears in the fabric from catching on the tree. Post-apocalyptic wasteland? Lots of dirt and dust adhere to the material. Desert? Sunburn along the shoulders and sleeves; It could be sand or dust stuck to the fabric. There are many ways to make a costume hurt, so you have a lot to choose from! The methods you use will depend in part on the material you’re weathering (cloth and armor, for example) and how long-term you want that sadness to last (dusting with “dust” dust). dirty” for a photo session versus using spray paint to permanently “stain” the fabric). For a quick overview of the technique, check out MangoSirene’s basic tutorial video on uncomfortable fabrics. This includes a lot of simple techniques like tea dyeing, sanding etc that are great for creating an overall aged look on the fabric. For many outfits, this is all you need to create a great “live” look. /film work (methods are in bold for easy skimming):
For fabrics that need to be put to good use, there is no substitute real dirt. ???? Need a real, dirty and stained white shirt? Use it as a rag to clean the windows of your house, clean your car, clean the kitchen floor, etc. Rub the stain into the fabric. It will stain beautifully! (As a bonus, your home and car will be nice and clean.) For light-colored fabrics, I do a lot. tea dye to reduce the brightness. To “dirty” clothes more controlled, I put Concentrated blend of instant coffee and tea in a spray bottle and apply to the areas I want to make darker. You can control the strength of the stain remover by adding more or less instant tea/coffee powder. (Stains will be permanent, but they can fade a bit with washing, so it may take a lot of application to get them as dark as you want them to be.) Here are a few coats that I’ve tea-dyed. , then add fake sweat stains with instant coffee in a spray bottle:Paint and dye are also great ways to add a permanent dirt effect, especially on surface dirt like splashes of mud or blood stains. The My Litzibitz Trost outfit muddirt starts with a dense brown fabric dye in a spray bottle: Read more: how to decorate a wardrobe for a birthday Black spots and color variations were added later with alcohol-based ink and paint (rightmost picture). The light of spray paint can create a lot of stains. For a controlled splash effect, dip the bristles of a hard paint brush or toothbrush in acrylic paint or canvas, then run your finger along the bristles to sweep tiny drops of paint across the fabric. For deep stains, mix acrylic paint or fabric dye with water to dilute it, then drip or paint over with a brush. (For more general stains than individual spots, water down the paint and apply to a wet cloth, then let dry.) For Mark’s Captain John Hart outfit, I took a cotton t-shirt. new white, dye the tea, then attack it. with diluted acrylic paint: For a permanent matte finish (especially useful on darker fabrics), you can apply dry dust, dirt or earthand then glue it to the fabric with clear spray paint. For best results, add a very light layer of dust, spray, let dry, then add more layers. Paint won’t hold up very heavy applications, for temporary dirt effects that will sweep away or wash away easily (e.g. photographic or video footage), I use… food! ground cinnamon generates large dirt/dirt, as well as raw flour. Paprika Great for rust stains. Ground mustard (seed powder, not liquid seasoning) and corn flour a little rougher. Make sure they’re dry, so they’re just resting on the surface of the fabric, not rubbing deep into the fabric. Otherwise, they can be very difficult to clean. (These outfits are vintage wool and can’t be washed every day, so I had to use material that could be easily combed out):
Wear and tear
Fabric tends to wear out faster where there’s the most friction: Knees, elbows, trunks pulling the ground, places rubbing by straps or bags. To age the garment, you can fade or wear down the fabric in those areas. bleach solution or dye removal can be used to selectively fade fabrics. (Note: Concentrated bleach will damage fabric with repeated use, so if you’re starting out with a white or dyeable fabric and want to age it before sewing the garment, give it a several strong bleach cycles first. Bleaching will damage the fibers and give the fabric a uniform weather look.) For controlled fabrics, especially on heavier fabrics like denim or canvas, I do a lot surface sanding. You can use sandpaper, metal file, cheese mill, wire brush, or one rougher skin(premium grade; those are evil!) to roughen the surface of the fabric without tearing it. The area you want to tear is first sanded, rather than cutting the hole with scissors. This makes it look more realistic (raw edges, loose threads) and also helps prevent the cutout from stretching and fraying until it gets too big. fire for sharpening edges or burning holes in fabric. This can create a great visual effect for bullet holes or lacerations, although it does make the material more brittle and prone to damage. This method works best with organic materials (cotton, linen, silk, wool) rather than most synthetics, which tend to liquefy (nylon) or ignite in a fireball (acetate). spectacular when exposed to heat. PLEASE CHECK ONE RANGE FIRST to make sure your skin won’t turn into a pile of slag!
Read more: how to remove blue ink from hair The tools of non-fabric clothing can also take a long time. For metal pieces (buttons, buckles) or pieces with lots of texture, try applying shoe polish or Acrylic paint, then buff with a cloth to remove excess. Leave some paint on the surface detail that looks like dullness or accumulated dirt. This gauze knife (for my Barbarianna costume) was aged by applying acrylic paint to the surface, then rubbing with a paper towel to remove excess: it looks too smooth, you can scrape the surface with iron brush or sandpaper make it suffer. You can also apply a small amount of paint with dry brush or dipped tissue paper To add texture. These molded plastic horns (also for Barbarianna) are dry-polished with acrylic paint to make them look like older ivory: You can also paint first, then ruin the paint job by scraping, sanding or paint chips or scratches The paint on this helmet is sanded to create scratches on the surface: To create the look of damaged metal, a line of ultra-fine metallic silver paint can create easy scratch effect. Use the 000 brush or a toothpick to keep your lines thin. This will make the designs stand out more clearly, as well as make the object appear dull or aged. Paint over the piece of paint, and while it’s still wet, sprinkle dirt, makeup, rust, full earth, or any other dry media you want to add. Let it dry, then seal with clear matte spray paintThis new helmet is painted with matte acrylic paint, then coated with gouache (while the paint is still wet) to create a dirt and rust effect:
Some things to keep in mind when you’re dressing up: Read more: Do you sweeten wine before bottling? Then read this…
- Don’t make your fabric unwashable. At best, your outfit looks dirty but smells clean. ???? Even for the outer layers of clothing, you want to be able to wash the garment in the event of an accident (someone spills a drink on you, etc.). If you want your distress to remain after multiple washes, make sure to use dyes and paints that don’t absorb. Keep in mind that some pain relief techniques (spray paint, etc.) may require delicate cycles or hand washing to maintain.
- Does not destroy the structural integrity of the garment. Shredding and sanding the fabric can produce realistic damage effects, but it will also reduce the life of the material. Make sure you leave structural seams intact and try to keep most of the surface damage rather than tearing large holes in the fabric.
- Organic materials decompose over time. For permanent weather resistance, use inorganic materials such as gypsum, gravel dust or full soil rather than organic materials such as flour or corn starch, which can grow fungi. mold or attract insects in the warehouse.
Last, Wallx.net sent you details about the topic “How To Make A Shirt Look Dirty❤️️”.Hope with useful information that the article “How To Make A Shirt Look Dirty” It will help readers to be more interested in “How To Make A Shirt Look Dirty [ ❤️️❤️️ ]”.
Posts “How To Make A Shirt Look Dirty” posted by on 2021-10-25 20:31:08. Thank you for reading the article at wallx.net