How To Build A Cyc Wall

Professional photographers and commercial advertising photographers require a lot of very specific equipment. They need to keep all their cameras and lighting equipment up and running year after year, but that’s not the only concern they have. Their studio usually includes a tornado wall; one wall provides perfect light and no horizon. Cyc walls are also often referred to as infinity walls because they appear to simply fade in all directions with no defined horizon. Perhaps you’ve also seen the tornado wall in a theatrical play? Today we will show you how easy it can be to build a bike wall.

Prepare the bicycle wall

Contents

Frame your usual wall

Build a wall just like you would if you were building a standard wall. Your studs should be centered 16” to maintain the structural security you need. Skip this step if you’re building a bike wall into an existing room. If you are building into an existing room, you will need to remove the drywall to expose the studs.

Remove the right corners

The goal of a bicycle wall is to hide the right angle intersections. Your finished cycle wall will not appear to be visible at all, like the inside of an egg without a shell. We achieve this by installing a half radius, about a quarter of a circle, that bends to every right angle, effectively eliminating all hard corners.

Create curves to start forming the Cyc . wall

Drywall is designed for installation on perfectly flat surfaces. But it’s actually quite pliable when you wet the back with a sponge and then lean against the wall to begin to curve (sag) under its own weight. Do this a few times and it will be much easier. Read more: how to delete a failed snapchat | Top Q&A

Complete the corners

The corners are the most difficult part to install because of the unique shape and the required bend. Consider using two layers of 1/4″ bent drywall instead of 1/2″ drywall for the corners. Some builders use chicken wire and plaster. This method is also effective but requires significantly more drying time due to the amount of plaster used.

Ice, Mud and Sand

Once you’ve finished setting the radius and creating the drywall bends, it’s time to glue it all back on. Use drywall tape as you normally would when building a wall. Apply plaster, smooth as much as possible and let dry. Sand the entire wall for a perfectly smooth finish. Reapply drywall slurry as needed to achieve desired smoothness.

Complete the Cyclorama Wall Construction Process

Read more: fallout 4 ways to use pipes | Q&A final steps to completing your bike wall project.

Bicycle wall painting

Finally, you are ready to draw! Every photographer or videographer has different requirements for a bike wall for different projects. The most popular paint for finishing cyc walls is eggshell white or satin white. You don’t want a lot of light because of the way it allows the light to bounce around.

Building a bike wall is easier than you think

You might think it would be easier to buy a preformed fiberglass wall; and you are right. It’s easier, but quite a bit more expensive. If you are thinking of building a bike wall yourself, we hope you have experience as it is very difficult and takes a lot of time. Now, if you are looking for an affordable bike wall kit that is customizable to your needs, easy to install and will save you hours of work, then check out the bike wall kit. our custom bike. Each order is custom designed based on the measurements you provide while placing your order. Call us at 877-303-2263 if we can help you with any part of the ordering process.