Methods On How To Downgrade MIUI Version On Xiaomi Phones

Recently, have you received the long-awaited update on your Xiaomi device, but suddenly you start to notice that your smartphone is starting to lag, the battery life is not long enough, and the functionality of the smartphone is starting to slow down. Overall performance is not much desired? Or maybe some apps stop working the way they should? Well, this is a pretty common problem, especially with the latest firmware versions (or beta versions). The solution here is to roll back to the previous Stable firmware. In this post we will check working methods on how to restore MIUI version on Xiaomi smartphone as safely as possible. In most cases, this guide can also be applied when downgrading from MIUI 11 to MIUI 10. Read: how to downgrade miui It is highly recommended that you read the entire guide carefully before performing any action. with your device. Even the smallest mistakes can cause problems. You can even browse through other tutorials on the web to get as much information as you can.Latest MIUI 11 update screen.Attention! We have information that this guide will not work on some specific devices and you cannot use it, otherwise you will have a locked device. First of all you have to check the ARB (anti-restore) status. Remember that you are doing it at your own risk and assume all responsibility for your actions. Have you successfully downgraded your MIUI version? Share your experience in the comments section below and I’m sure it will help others!

How to downgrade from MIUI 10 to MIUI 9

It is a known fact that on some specific device models you cannot downgrade from MIUI 10 to an older version, as Xiaomi recently decided to stop this and issued a ban on Anti Roll-Back. (ARB). This is also related to Android 8 and the latest changes in Google’s privacy policy. We’ll probably see Anti Roll-Back make it to every other Android 8 or newer device, regardless of manufacturer. released after the second half of 2017 may be affected by the ARB ban. Basically means if you have MIUI 10 Android 8 (or later) device, you cannot restore and if you continue with the tutorial you will have a locked phone as a result. Here you can check the list of devices with ARB enabled to be sure and instructions on how to check the ARB status on your phone. You have now checked the ARB status on your device and are ready to proceed. First of all, let’s prepare. If you decide to restore the MIUI firmware version yourself, you must be completely prepared. Now we’re going to list everything that should be done in the beginning, nothing special or difficult actually. We will need to format the device to its original state, remove the latest MIUI version and then install the required MIUI version using the standard methods: with “three dots”, fastboot or Recovery. Charge your device up to 70-90 percent and back up all required data, as the rollback process will completely wipe your device storage. Don’t save backups to phone memory, save backups on your PC or any other safe place! Once you’ve completed a full backup, we’ll restore the device to factory settings. You can find that in the “Settings” menu. Go to “Settings” > Scroll down and find “Advanced Settings” > “Backup and Restore” and find “Factory Reset”. Your mobile phone will reboot and restore to a blank “factory” state. In some cases this reset may downgrade your device to a previous MIUI version, in some cases it may not. Especially if you have been using the new ROM for a while. If factory reset does not help, continue to the next step. This method won’t work in most cases, but you can still try and test it yourself. In this step, we will use Recovery mode. There are two ways to do this. The first way is to open “Settings” > find “System updates” > tap on the “three dots” icon in the upper corner and look for “Reboot into recovery”. If you don’t have such an option in the menu, turn off your phone, wait a minute, then press and hold the “Volume Up” and “Power” buttons at the same time until Recovery mode starts. Search for “Wipe Data” and proceed to delete. Read more: Smarter ways to organize and store Washi TapeYou will now need to find the correct ROM version for your device. This is very simple, search on our website or go to the official MIUI page, find your device model and download the required version. Please note that you cannot flash ROMs from different device models! After you have downloaded the required ROM version, rename it to topqa.info and copy it to your phone’s internal storage.

See Also  Keto chicken zoodle soup recipes
  • Open the “Settings” menu.
  • Find “About” > “System Update”.
  • Tap on the “Three dots” icon and select “Locate MIUI ROM”.
  • And find the previously downloaded ROM version.
  • Phone asks to reboot, confirm.
  • If you are lucky enough, the previous ROM version will be installed, but sadly in most cases you will see the error: “Unable to upgrade to previous version”.
  • It’s time to try different methods. To use the following two methods, you must unlock the bootloader on your device.

    How to restore MIUI version using MIUI Beta

    Pay attention that in mid-summer 2019, the MIUI beta firmware release process has changed quite a bit. They basically stopped releasing developer ROM versions for a lot of different Xiaomi smartphone models (including the latest ones). Mostly, this applies to global ROM versions, MIUI China beta will still work. basic setup of your device and then download required Stable ROM version and install via “Update” menu again. If this method does not work well, continue to the last method.

    How to downgrade MIUI version using Fastboot (MiFlash)

    Again, a quick reminder that you must unlock the bootloader to continue with this method. If you don’t know what Fastboot is and have never used MiFlash, we strongly recommend that you read more guides and gather more information to avoid any confusion. Also, you must have Mi Flash installed on your PC.

  • Download the FastBoot ROM version for your phone.
  • Extract the downloaded archive twice and move it to a new folder on your C: drive.
  • Connect your device to your PC via a USB 2.0 cable.
  • Start the MiFlash tool.
  • Locate the downloaded ROM files.
  • Find your device in MiFlash and tick the “Clean All” option.
  • Start flashing.
  • Wait until the process is completely finished.
  • Your phone will reboot.
  • If everything was done correctly, your phone should now have the required ROM version installed.
  • See Also  SCISSORS & SAGE | Top Q&A

    It’s quite a lot. Again, if you’ve never used MiFlash and don’t know how fastboot works, do your research! Don’t forget to share your opinions and suggestions in the comments section. Read more: Conga Drums – A Beginner and Intermediate Player’s Guide.

    Last, Wallx.net sent you details about the topic “Methods On How To Downgrade MIUI Version On Xiaomi Phones❤️️”.Hope with useful information that the article “Methods On How To Downgrade MIUI Version On Xiaomi Phones” It will help readers to be more interested in “Methods On How To Downgrade MIUI Version On Xiaomi Phones [ ❤️️❤️️ ]”.

    Posts “Methods On How To Downgrade MIUI Version On Xiaomi Phones” posted by on 2021-11-03 23:09:14. Thank you for reading the article at wallx.net

    Rate this post
    Back to top button