What Is The Proper Way To Clean Your VR Lenses?

Virtual reality has always been dubbed the next entertainment frontier. With VR technology, we don’t just become a passive audience to whatever entertainment we’re consuming – we’re literally placed in the middle of it. over the past few years by major brands such as Oculus, HTC, Samsung and Sony. While these headsets are designed to withstand intense movements comparable to VR entertainment, they are still fragile devices that require gentle maintenance. One thing that you have to do quite often is clean their lenses. Why do you need cleaning and how often should you do it? What is the right way to clean your VR lenses? Read: how to clean vr . lenses

Why do you need to clean your VR lenses?

Contents

The lenses in your VR headset are similar to any standard camera lens or LCD screen on your phone. They are especially susceptible to dust accumulation and oil stains from contact with the skin of your face or fingers. Since these VR headsets can spend a long time near your face, it is almost inevitable that the lens will pick up some kind of dirt from you. The simple truth is that there is dust everywhere, try to keep your gaming setup as clean as possible. While there are some dust covers that you can buy for VR headsets, you should still allow your headset to air out after use, as you will inevitably sweat. Example As with the LCD screen in your device, leaving any traces of dust and oil on your VR lens rarely leads to any lasting damage. However, the reality is that these lenses are so small that any smudges or pieces of dust can easily ruin your VR experience. What’s the point of buying a VR headset if you can’t fully enjoy it?

How often do VR lenses need to be cleaned?

As we mentioned, there are many ways your VR lens can get dirty. When this happens, we recommend that you step in immediately and clean them. At a minimum, you should clean your VR lenses before and after each gaming session. Clean them before playing to remove dust that the lenses may have picked up in storage while cleaning them after removing any oil stains you may have gotten onto the lenses during use. still give the lenses a quick cleaning session every week or so. Dust inside the headset’s cavity and on those lenses can build up pretty quickly, and you wouldn’t want to find your VR headset covered in a thick layer of dust when it comes to gaming.

What you need

1. Microfiber cloth

The most basic thing you will need to clean your VR lens is a microfiber cloth. You don’t have to spend a lot on these, but make sure to get a high-quality, super-soft, and lint-free variety. We’re part of this pack of six microfiber cloths from AmazonBasics because each is individually wrapped in its own reusable plastic envelope. Microfiber fabrics can also be washed and reused, so this pack can last several years.

2. Compressed air canister

While not absolutely necessary, carrying around a can of compressed air can make it easy to remove dust that has accumulated not only on the VR lenses but also on the entire internal cavity of the headset. Again, you don’t need to expend a lot of compressed air. this 10 oz. can from USA Tools N More should work just as well as any other brand.

A step-by-step guide to cleaning your VR lenses

Read more: how to spell 90 in English You can do this process as often as needed without worrying about damaging your headphones.

1. DO NOT use any liquid cleaners

Before we start talking about what to do, we must highlight what NOT to do. Do not use any kind of liquid cleaning solution on your VR lens. This includes any alcohol wipes or disinfectants. These cleaning solutions are abrasive and can cause permanent damage to your VR lenses. However, you can wipe the outer surface and accessories of the headset with a disinfecting wipe.

2. Use compressed air to remove dust

Take your can of compressed air and point it towards the nooks and crannies of your VR headset and spray the compressed air in short bursts. DO NOT aim the nozzle directly at the lens and make sure that the nozzle is 2 to 3 inches away from the surface you are cleaning. You can get around the headphones with a canister of compressed air, and it’s especially helpful in cleaning the inner cavity of the headset that’s in front of you.

3. Wipe the lens with a microfiber cloth

Finally, grab your microfiber cloth and gently start cleaning the lens of the headset. Wipe in a circular motion, starting from the center and gradually working out.

Final thoughts

As with any sensitive piece of technology, your VR headset needs regular maintenance. The good news is that it doesn’t take long to take good care of your VR headset. The only part you need to pay special attention to are the lenses – they are by far the most sensitive and fragile part of any VR headset. VR lenses before and after each use. A can of compressed air can also make the process much faster. As long as you maintain it properly and regularly, you are sure to get years of entertainment with that VR headset.