Tutorial On Sewing Backpack Straps, Small Backpack: Part 2
This is the backpack strap sewing tutorial and the second part of the Small Backpack Pattern to follow. If you came here in person and didn’t see the first part of this sewing tutorial, you might want to go back and start the project from scratch with Part 1: Small Budget Backpack Pattern.
Reading: how to sew backpack straps This is the technique of making backpack straps. It’s especially useful when you don’t have enough fabric to make a bag-like fabric handle. You can use these straps on leather, vinyl, Kraft-Tex and canvas bags, backpacks, and crossbody bags.
The first thing you might notice is that I don’t use a D-ring as specified in the material listing for the tutorial. Unfortunately, I can’t get the normal rectangular style D rings with rounded edges and I can only find triangular rings and fully rectangular rings. You should use a normal D-ring if you can. I will if I can. It really doesn’t matter as long as you keep the same hardware size and same color. 
Video tutorial
Contents
Step one: Sew the outside zipper
The next step in the tutorial to do before we can attach the straps and the hardware of the backpack is to create the back of the backpack along with the outside zipper. You will do on the back of the small backpack pattern piece. As for the outside zipper fastening, I won’t repeat what was taught on the website, so for a great tutorial on how to sew an outside zipper please watch this video on how to add a zipper pocket. zipper to pocket or purse. Follow the drawing below the video to give you an idea of how to cut and install the bag.
Step two: How to make backpack straps
Read more: how to find ledges for bass fishing Cut the full length of the tape in half so you’ll have 33 inches of tape on each strap. This will eventually create a 24-inch strap.
Fold the tape in half lengthwise and iron to create a crease.
Use the fold you created with the iron to guide you. Fold each side to reach the center of the tape. 
Pin the ribbon and sew at 1/8″ on the edge of the ribbon. If you don’t want the tape visible, use the 1 ″ ribbon. 
Step 3: Attach the hardware to the back of the backpack
After sewing the cotton and ribbon together, you make the loops for the loops. You will need a total of four. I used about two inches of cotton tape for each tab. I only use cotton tape, not ribbon. If I also use the ribbon, I don’t think my machine will be able to take all the layers when it’s time to put the backpack back together. In the bottom corners, place the loops and tabs one inch from the edge. : I’m using photos from two backpacks that I made for the blog and video. I decided to slightly change the design between the two versions, so follow the placement for the tabs shown on the template. 
When stacking backpacks, you’ll need enough room to allow the seam and legs to be able to sew the edge of the loop. Read more: how to draw a birthday hat
For the top rings, you will need to fold the strap so that the raw edge is not exposed. Cut the cotton bandage 3/4″ from the stitching line and sew it up. I overlap the edges. 
Sew as close to the loops as possible. Use the zippered legs if you want to get even closer.
Step 4: Add hardware to the straps
Place the ribbon on top.
Thread the strap through the loop.
Fold an inch. 
Pin this end two inches from the ring. 
Sew the straps to form an X. Alternatively, you can use rivets or screws with an awl as shown in this picture. At the other end of the strap, thread the slider. Thread the strap through the first hole. 
Then thread the wire through this bridge to the other hole. 
Thread the lobster claws.
To make this step easier, pull the strap away from the bridge. 
Insert the end of the strap through the first hole.
Then over the bridge and through another hole. 
Fold the end of the strap one inch and pin it about two inches away from the slider. 
Sew the same way you did on the other end to make a big X with stitches or put in a few studs. 
And there you have it! Next, I will show you how to make the application bag and how to complete the backpack. Until next time! Continue to Part 3
Read more: how to make a cup mat in the ring
Last, Wallx.net sent you details about the topic “Tutorial On Sewing Backpack Straps, Small Backpack: Part 2❤️️”.Hope with useful information that the article “Tutorial On Sewing Backpack Straps, Small Backpack: Part 2” It will help readers to be more interested in “Tutorial On Sewing Backpack Straps, Small Backpack: Part 2 [ ❤️️❤️️ ]”.
Posts “Tutorial On Sewing Backpack Straps, Small Backpack: Part 2” posted by on 2021-11-01 20:11:18. Thank you for reading the article at wallx.net
