MSI GeForce GTX 1050 Ti 4G OC Pushed To The Max

Video How to Overclock 1050 ti

Overclocking NVIDIA GeForce GTX 1050 Ti

When the NVIDIA GeForce GTX 1050 Ti launched earlier this week, we didn’t have enough time to properly overclock it, but we were impressed by the performance that the $140 card offered. The MSI GeForce GTX 1050 Ti 4G OC ($139.99) graphics card shows it can easily beat the XFX Radeon RX 460 4GB which also costs just $139.99 shipped and it usually performs close to the EVGA GeForce GTX 960 Super SuperClocked 4GB was $239 just a year ago. It makes us wonder how much more we can improve the performance if we overclock it manually?Read: How to Overclock the 1050 ti The base model MSI GeForce GTX 1050 Ti 4G has a base speed of 1290MHz with a boost clock speed of 1392MHz. The model we are looking at today is the MSI GeForce GTX 1050 Ti 4GB OC model that comes with a factory overclocked 1342MHz base with a boost clock of 1455MHz. NVIDIA says you’ll be able to “get in excess of 1,900MHz easily” when overclocking the GeForce GTX 1050 Ti, so we’ll be using the MSI Afterburner Utility to see if we can push the GeForce GTX 1050 Ti. how far to go.The first thing we noticed in MSI Afterburner 4.3.0 Beta 14 is the MSI GeForce GTX 1050 Ti 4G OC graphics card which unfortunately doesn’t have too many overclocking buttons to rotate. For example, there is no core voltage regulation on this series nor the ability to increase the power limit percentage beyond 100%. NVIDIA says you don’t need any extra voltage to get over 1900MHz on this card, and without an external power connector on the board, the voltage controls may have been removed so the card doesn’t use too much power. 75W. The good news is that you can manually adjust the core and memory clocks as well as temperature and fan speed limits.We were able to increase our core clock to +175 MHz and memory clock to +750 MHz without making any other changes. This increased our base clock from 1342 MHz up to 1517 MHz and boost clock from 1455 MHz up to 1630 MHz. The memory clock has gone up from 1752 MHz (7008 MHz effective) all the way up to 2127 MHz to 8,508 MHz or so we think.After running some benchmarks and looking at the logs, we found that the card’s 4GB GDDR5 memory was indeed locked at 8008MHz and we couldn’t get past 1911MHz on the core. We asked NVIDIA about the overclocking limits on the GeForce GTX 1050 Ti and were told they were looking into that. When we asked MSI USA about the overclocking wall we were experiencing, they said there was most likely a limit placed on the card and followed by most “All NVIDIA cards are normally locked.” It is possible that lower end cards are restricted, but we disagree with the claim that most NVIDIA graphics cards are locked.Read more: how to size water slide slalomWe took a look at our GPU-Z logs that we kept during our benchmark run and charted a few of them for you to see. The only time we hit more than 1900 MHz was when we were in the game menu or loading the map when the GPU load didn’t reach 100%. The average clock speed in Deus Ex: Mankind split is 1846 MHz and in Battlefield 4 is 1837 MHz, both of which are very respectable to see the GeForce GTX 1050 Ti have a base clock of 1290 MHz suggested on paper like that. any. In Battlefield 4 we noticed the clock speed was pegged at just 99% until the end when it hit 100% load the first time. GPU-Z shows that the card is power constrained during gaming, so the clock speed varies due to this and is not very consistent.This left us wondering about clock speed consistency across the MSI GeForce GTX 1050 Ti 4G OC, so we took a look and found that clock speeds are still variable and inconsistent. In the BF4 run above, we averaged 1724 MHz and it ended up flat at 1721 MHz at the end of the run. So overclocking 175MHz on our core clock helped our average core clock in the BF4 go from 1724MHz to 1837MHz, which is a 113MHz increase.Now that we have the basics, we can take a look at the test system and get the benchmarks! Read more: Remove desktop shortcuts
Computer Basics Questions or comments? See this thread in our forum!