How to use a laser level to hang pictures

Video How to use a laser to hang picturesContrary to what people may believe, laser levels are not only useful for large construction projects.It would not be wrong to say that laser levels have a universal utility. You can use them to hang wallpaper, install a long shelf, close cabinets or decks, and tile your kitchen floor. my house. Have doubts? Let us show you how to use a laser to hang pictures.Also Read: Best Laser Level Review 2018-2019

Why Should You Use Laser Levels for Hanging Images?

• Since you have the laser level mounted on a wall or on a tripod, you should be free to nail where you will eventually hang the frame with one hand.
• The laser level also allows you to hang the photo at an angle
• If you are going to hang a full array of paintings – of identical sizes – on the wall, the level, in addition to marking the frame position, will also help mark the position of the mount.

How to use laser level to hang photos?

Step #1: Get the tools

In addition to the laser level (obviously), you need a wide range of tools to get the job done. Make sure you have it BEFORE you start working on the project. Otherwise, as experienced people can testify, there is nothing more frustrating than not finding the desired tool halfway. Here are the tools you should have…

• Measuring tape
• hammer
• Countersink
• Drill
• Pencil
• Blue Ice
• Screwdriver

Step #2: Decide where to hang

• First of all, you need to decide exactly where you want to place the picture.
• When you’re done, grab a hammer, a nail, and a measuring tape.
• Now use a tape measure to measure the distance from the floor to the position in the line where you want to place the picture.
• When you’ve finished measuring, record the distance. Next, you nail the wall and set the frame.

Step #3: Get laser level

In the previous step, you noted the distance from the floor to the point where you placed the frame. As you have guessed, it will be difficult to repeat the same process with other frames. That’s where the laser level will come to your rescue Read more: How to convince your parents to buy you a phone at the age of 12 However, before you start using the laser level for the same purpose, it is important that you must know its type. For, if yours is a self-leveling model, is to set it up on a tripod for it to start giving the correct signals. Conversely, if your laser level is not self-leveling, you have to manually adjust its orientation the right.

Step #4: Use Levels

• Take the leveled laser level and point it at the point where you placed the first frame.
• When the point of the laser meets that point, rotate the level around towards the other wall where you want to hang the photo.
• Mark the corner on the wall with chalk. For each new image, you must repeat this process.

Step #5: Final Step

• When you’ve finished marking, take out the hammer and, using it, drive a nail into the exact spot you marked earlier.
• Then fix the frame of the picture on the nail and, using the laser, align its upper part.

While all of these steps may seem verbose, they are just whatever. Even novices can complete the entire process in less than 15 minutes. And provided you can take those 15 minutes out of your routine, you’ll be able to put all the frames to the same degree, which will make your home look stunning.

Tips for hanging photos

The above method will help you in hanging pictures on flat walls. However, if you are going to hang pictures on a curved wall using a ledge, be sure to note the following measurements carefully to facilitate proper balance and alignment.

• The center point of the frame of each picture
• Distance between top of frame and suspension
• If you are using two suspensions for a single frame, you will do well to calculate the distance between the center of the picture and the center of the suspension.

Best laser level for hanging photos

Here are the two best laser levels for hanging pictures…

Bosch GTL2 Square and Laser Level

The reason why we recommend this level is that it comes with two bottles of bubbles. Both support laser level for precise alignment on the wall. Moreover, in its 90 degree layout, you can increase/decrease its angle with 5 degree changes.Read more: how to make a wrestling belt More importantly, even if you don’t have a lot of technical knowledge, GTL2’s one button operation – turns on/off both of its bars, makes it work easily. Plus, since it features non-abrasive adhesive mounting bands and an easy-to-press push-button, you can easily stick the tool to the wall.

Hammerhead HLCL01

Provided you’re on a budget, this smaller handheld laser offers a cheaper alternative to its competitors. It comes with a clip so you can mount the laser level on a table or chair or whatever you think might help you in leveling the image.More importantly, since this model is self-leveling, you won’t have to spend any time trying to level the ground. Additionally, it comes with three laser line modes and is backed by a 3-year warranty. That means you really have nothing to lose with this model. Read more: How long does it take to set up jello

Bottomline

Having shown you how you can use the laser level to hang pictures, it is imperative that you make sure you remain safe while using this tool. Therefore, before looking at the signal, put on goggles. Also, NEVER use your laser level near a lighter or kitchen, as it could catch fire. And when you’re done, remember to turn off the device and wash your hands. Read more: How long does it take for jello to set up

Last, Wallx.net sent you details about the topic “How to use a laser level to hang pictures❤️️”.Hope with useful information that the article “How to use a laser level to hang pictures” It will help readers to be more interested in “How to use a laser level to hang pictures [ ❤️️❤️️ ]”.

Posts “How to use a laser level to hang pictures” posted by on 2021-11-13 08:09:29. Thank you for reading the article at wallx.net