How To Take Gopro Hero 5 Out Of Case

Video How to get the gopro hero 5 out of the case Starting with the GoPro HERO5 Black, the larger GoPros1 got a new body design. With HERO4 and earlier models, you must put them in a separate box if you want them to be waterproof. Starting with the HERO5 Black (or, technically, with the smaller HERO4 Session), the body is waterproof on its own. In the case of black, that means rethinking how to seal the lens while keeping it waterproof. The solution they came up with was a protective cap that locks firmly on the main lens but also has minimal impact on optical quality. It’s worth noting, however, that taking it off isn’t really intuitive. The lens cap is a square section with a flat glass window that acts as a protective layer over the main lens. When you first look at it, it may not seem like it was designed to appear. But it will be and you can replace it with a new one if the existing one is scratched or cracked. And yes, you can buy replacement lens caps), so scratching the lens cap doesn’t mean you have to replace the entire camera. use the camera in GoPro’s SuperSuit. In order for the camera to fit in that case, you’ll have to remove the lens cap first. (There are other dive covers from third-party manufacturers that don’t require you to remove the lens cap.

Remove the lens protective cap

Removing the lens port cap is a two-step process. First, you just need to pull the gate away from the body a little to get a gap of about millimeters. Once you’re done, you can screw the lens port out. But if you don’t create that little separation first, you won’t be able to screw it up.

1. Create a small separation between the lens port and the camera body

There are different ways to solve the first part. The goal at first was to just make a small opening, not have to pull the cap out of it completely.Use fingers. This works but can be difficult to do, and I often give up and move on to the next method. Grip each side of the port with your fingers, being careful but forcefully pulling the lens port directly away from the camera body. At first, you will feel that it is not moving and you may worry that you will break it, but it takes quite a bit of force to pull it out. What you are looking for is a distance between the port and the camera body of about a millimeter. Read more: how to get credit on overwriteUse a credit card. This is my preferred method. Wedge the edge of the credit card between the lens port and the camera body. Carefully rotate the credit card around the gate to create some space around it. Credit cards seem to have the perfect thickness. I’ve noticed that some other cards, like my library and shopping cards, are too thin.Gently insert a credit card into it and rotate it around the lens.Use tools. While this gets the job done, I wouldn’t recommend it because of the risk of scratching your camera. But if you have some very thin tools, such as a couple of small screwdrivers (or yes, a blade – but please don’t cut yourself!), you can pry open the lens port a bit to create some separation. that difference. You can also do it with a pair of pliers, but the chance of scratching the camera is much higher.

2. Turn Lens Cap Off

Now everything becomes much easier. Simply rotate a quarter of the lens port in either direction.Rotate a quarter in either direction. The cover will then slide off easily as soon as the slots align on its back. The lens itself will now be exposed.As the lens contacts, you can see notches that cause you to twist and lock the lens port cap.

Installing Lens Port Cap

Installing a new lens port cap—or reinstalling an existing one—is simply the reverse of the process. Read more: Quick answer: How to clean C drive in Windows 7 without formatting? When the cover rotates a quarter of the way from the body, slide it back. It should align with the retaining grooves. While firmly pushing the cap toward the camera body, rotate the lens port back into place. Make sure it’s going evenly – you can just lock it into place on one side, in case it’s not mounted properly. You’ll hear a solid click when it’s locked into place. Make sure it’s locked everywhere. It’s pretty easy to click on one side and stay on the other, in which case it’s not installed properly (but it’s also obvious when you look at it).

Things to keep in mind when removing or replacing the lens protector

The first time you try this, you feel like it won’t come apart or you might break something. However, the system is pretty sturdy so it’s pretty hard to do any damage (as long as you don’t force it with tools). Do not place the camera down on its front face. The front of the lens is curved, and even though it’s glass, it can still get scratched pretty easily. And finally, if possible, you should install the new lens cap in dry conditions such as an air-conditioned room. The reason is that if you do it in wet or humid conditions, such as on a diving boat, the humid air in there can cause the lens to fog up and there’s really no way to use the kit. Anti-fog insert with protective lens spread out. Actually, this is not a big deal in this case for the simple reason that not much air can fit in that small space, but it makes sense to minimize the risk of fog if you maybe. Amazon PA-API was last updated on September 11, 2021 at 11:39. Product prices and availability are accurate as of the date/time specified and are subject to change. Any pricing and availability information displayed on the Amazon Site at the time of purchase will apply to the purchase of this product. Read more: How to draw Orcs step by step | Top Q&A

Last, Wallx.net sent you details about the topic “How To Take Gopro Hero 5 Out Of Case❤️️”.Hope with useful information that the article “How To Take Gopro Hero 5 Out Of Case” It will help readers to be more interested in “How To Take Gopro Hero 5 Out Of Case [ ❤️️❤️️ ]”.

Posts “How To Take Gopro Hero 5 Out Of Case” posted by on 2021-11-14 06:17:28. Thank you for reading the article at wallx.net