How To Sew A Maxi Dress Without A Pattern – The Easy Way!

In today’s post: Learn how to sew a super easy maxi dress without textures! *** 5 years ago I shared a SUPER EASY maxi dress sewing tutorial. It’s the simplest way I can think of to sew a maxi dress with sleeves. The original tutorial used my Easy Tee pattern as a base, but I decided to revisit it today and show you how to sew this simple pattern-free maxi dress. I’ve included new photos and more detailed instructions. Enjoy! *** Read: how to sew a maxi dressI got the idea for this easy to sew maxi dress when I saw the dress below (from The Gap years ago). It’s so cute and looks totally comfortable and cool for the summer. But it’s $75, which is a bit expensive and I can tell from the photo that the resulting waistline is going to be very low for me, looks horrible. Plus, in reviews, people complain that the fabric is very thin, which means it won’t cover the top of my muffin very well.So I found my own way. It takes 2 meters of knit and one meter of spandex, so you should be able to get it for $50 or $60 less than the Gap version. You don’t need a sewing pattern, as you will simply create your own using the t-shirt as a guide.

How to make a model of a maxi dress

This maxi dress has only two main pattern pieces: one front and one back. Basically, you’ll draw around a t-shirt that fits you well to create your own texture for these pieces. You will need 2 yards of knitted fabric (stretch) 60 inches wide. You will also need a 1/2 inch elastic tape measure. Wash and dry the fabric before starting. Then spread the fabric out on a flat surface and smooth it out. Fold the fabric from each side so that the stitched edges meet in the center (see photo below). Please note that this method of cutting maxi skirts will not work with sizes above XL. wear clothes. If you have another size, don’t worry! I show you how to make this dress using a t-shirt that you own. The illustration below shows how the pieces would be cut for this dress if you used the Easy Tee pattern.To sew this dress using a t-shirt instead of my pattern, look for a t-shirt that hugs your body without being too tight so it can stretch as you put it on. If you use a t-shirt that has to stretch to fit you, your finished maxi dress will be tight. To get the fit you see here, you need to use a t-shirt that fits without being tight. (Please note that this method of sewing a maxi skirt won’t work for sizes above XL.) Read more: how to keep pancakes warm Fold your t-shirt in half and line it along one of the sides. folded fabric edges. Make sure the shirt is flat. Use pins to “line” around the shirt, as shown below. You don’t need an extra seam allowance along the neckline, but you do need an extra seam allowance elsewhere. You’ll notice that we don’t treat the sleeve as a separate part; Just trace all the way around the shirt and sleeve together as you see below. Usually, when tracking a pattern, I add 1/2 inch of allowable seam; For this dress, I added a little extra space (1-2 inches) for a comfortable fit. Remember, you can always get something in, but once it’s cut, you can’t get it out!Curve in to the right under the sleeve, and then immediately outward as shown below. You will trace/pin a straight side seam along the length of the dress. Dress pieces should be about 60 inches from shoulder to hem (or a little longer if you’re really tall – I’m 5’3″ and I cut at least 5 inches off the bottom before sewing).Repeat on the other side with a mirror image. On this side, cut the neckline lower, following the front neckline of the t-shirt, leaving a little extra fabric underneath the skirt pieces. From there, you’ll want to cut a piece of neck lanyard that’s about 1.75 inches high and 28 inches wide (the extension goes by width). You’ll also want to cut a piece of shell that’s about 1.25 inches high and 50 inches wide (length goes by width).

How to sew a maxi dress

Take two of your maxi skirt patterns and place one on top of the other, with the right sides together. Sew across the shoulder seam. Sew the side seams, starting under the sleeves and continuing all the way to the bottom of the garment.That completes the very basic outfit construction! Now we need to add some elastic to define the waist. I like my dresses to have stretch at my natural waist; However, depending on your body type, you may prefer a higher or lower waist. So put on your dress and grab your elastic. Stand in front of the mirror, tie the elastic around your waist, then move it up and down to see how your waist looks best. Mark where you want the elastic to be pinned NOTE: If the dress feels too loose even with the t-shirt elastic at the waist, you can insert the elastic along the side seams at this point. . creates a sheath to thread the elastic through. You should cut a long knit strip that is 1.25 inches tall and long enough to go all the way around the waist of the dress.Read more: how to add robinhood to mint Place one end of the shell strip in the center front of your dress, right where you marked the waistline. Carefully pin the sheath around the dress and back to the center front. Cut it when it meets itself. Fold each short end under and press. That should create about 1/2 inch clearance in between the ends of the case. You will now sew the shell to your dress. First, you will sew along the top of the sheath, very close to the edge. Use a long straight stitch and stretch the sewn fabric. You will then sew along the bottom of the sheath, again very close to the edge. Go slowly here so you can keep your stitches straight, but don’t stress too much if they wobble a bit. No one will notice once the elastic is put on.You can see in the close-up photo that my stitching here is a bit unsightly, but when the elastic shrinks you won’t notice it. (Be sure to use a long seam length when sewing trousers.) I cut 1/2 inch of the elastic just below my waist measurement, then sewed the ribbon to each end of the elastic and threaded it through. That way, all the elastic is hidden inside the case, and I can use the ribbon to tie a bow in the front.

Sewing maxi dresses: Done

Now you just need to finish the neckline, sleeves and hem. If you’re not familiar with tying a neckline, read my post on how to sew a t-shirt neckline. , or stretch the stitch. For this dress, I actually finished off the sleeves with a ribbon so they match the neckline.Finally, you will hem the dress to the desired length and that’s it! An easy to sew maxi dress, no pattern needed.Would you like to see the version from 5 years ago just for fun? Here you are:Read more: how to wash acrylic blankets Read more: how to wash acrylic fiber blankets

Last, Wallx.net sent you details about the topic “How To Sew A Maxi Dress Without A Pattern – The Easy Way!❤️️”.Hope with useful information that the article “How To Sew A Maxi Dress Without A Pattern – The Easy Way!” It will help readers to be more interested in “How To Sew A Maxi Dress Without A Pattern – The Easy Way! [ ❤️️❤️️ ]”.

Posts “How To Sew A Maxi Dress Without A Pattern – The Easy Way!” posted by on 2021-10-25 02:29:07. Thank you for reading the article at wallx.net