How To Screw Into Wood Without Drill

If you don’t have a drill on hand, screwing into wood will be quite difficult. However, that doesn’t mean you can’t do it. If you have a hand-held screwdriver, you can definitely get the job done. But not with much effort. Of course, having an electric drill can speed up the screwing process for you. It may also yield better overall results. Also, if you are working with some screws or screwing into hardwood, your job becomes easier when you have a power tool or electric drill on hand.

Simple steps on how to screw into wood without drilling


Before the invention of the drill or the cordless controller, most woodwork was done with nails. Screws are generally only used for smaller jobs. But when wireless drills emerged, screwdrivers were relegated to secondary importance. However, there will be some cases that still require the use of a screwdriver to screw into the wood. So, you already know the simple steps on how to use a screwdriver to screw into wood: Read: How to screw into wood without drilling

Step 1) Start with the pilot hole!

You will definitely get a firmer grip if you don’t use a drill or a wireless controller when screwing into wood. Likewise, you will be working on extra biceps. You can start work with a pilot hole. You should first drill a pilot hole before installing the screw by hand, you can use a hammer and small nail to make a small hole in the wood. This pilot hole can greatly facilitate the screwing process, especially, if you are working on a hardwood. It helps you to keep the screw in place and in alignment. Moreover, it prevents the wood from randomly splitting when you are screwing. Read more: how to bond an adjustment layer to a single layer Once you’ve created the pilot hole, you can then insert the screw head into the hole. Then turn the screwdriver slowly with your screwdriver. Your pilot hole will be deeper if you are using a longer screw. You should also carefully pull out the nail you are using to make the pilot hole. You need to be very careful in pulling out the nail because if you do it suddenly you can damage the wood. You can use pliers to pull out the nail by gripping the nail firmly with the pliers and pulling the nail straight out. However, if the nail is hard enough, you can use the nail of a hammer. You should at least use a rag to cushion the hammer head to avoid damaging the wood.

See Also  How To Rebuild A Hydraulic Cylinder

Step 2) Choose the Right Screwdriver

When choosing a screwdriver, you should choose one with a tip that fits the screw head. The tip of the screwdriver should completely fill the recess. However, if you are working on thicker parts, you should use heavier screws for better leverage and hold. Therefore, you should choose a screwdriver with a head that matches the diameter of the screw head. On the other hand, Robertson and Phillips drivers both have assigned numbers. The larger this number, the heavier and larger the screw head it can drive.

Step 3) Screw into the wood

To screw into the wood, you need to press firmly on the screwdriver. Place the screwdriver head into the slot on the screw head. Then place the screw head into the pilot hole. Then rotate your screwdriver as you press on it. Read more: How to clean gluten from surfaces Hold the screws and alignment board firmly. Make sure that the two pieces are screwed together tightly. If you find it difficult to align the boards, you can use a clamp to keep the boards in alignment, however, you should avoid forcefully twisting your screwdriver, especially, if you are working on wood. thick. Sharpening the screwdriver can cause the wood to crack or make you more susceptible to injury. If the screw is partially installed, you do not need to tighten it as hard as if the screw is still unmounted.

Extra tips

When is the Right Time to Use a Screwdriver to Drive Screws into Wood?

You may be wondering about the idea of ​​​​using a screwdriver to screw into wood, given the fact that today there are many power tools. However, there are cases where you need to be content with using a screwdriver. Some of these cases are as follows:

  • It is recommended to use a screwdriver when the use of power tools may be risky.
  • It is useful if you use a screwdriver when working in wet places or places with water.
  • It is recommended to use a screwdriver when working on non-standard sized screws.
  • It is recommended to use a screwdriver when it is impractical to use power tools and electronic tools.
  • Use a screwdriver when you need to work your biceps first.
  • It is best if you choose a screwdriver when safe equipment for using power tools is not available.
See Also  How To Make Fabric Stiff And Waterproof

Things you must keep in mind when using a screwdriver to drill into wood

However, using screwdrivers to screw screws is also fraught with disadvantages. First, you still need to make a pilot hole before you can screw into the wood. Second, it takes longer to complete the task. Furthermore, aligning panels can be doubly difficult when using a screwdriver. Plus, getting things done will be more difficult and require you to work hard. Therefore, the use of screwdrivers is not suitable for large projects.


There will be cases where you will need a screwdriver to screw into wood, especially when no power tools are available. Therefore, you should familiarize yourself with the simple steps on how to use a screwdriver for such a purpose. However, working with screwdrivers gives you a bit of satisfaction that you usually don’t get when using power tools. It also gives your biceps muscles the workout they need to make them stronger and toned. So you never hesitate to use a screwdriver to enjoy the advantages inherent in its use.

Last, sent you details about the topic “How To Screw Into Wood Without Drill❤️️”.Hope with useful information that the article “How To Screw Into Wood Without Drill” It will help readers to be more interested in “How To Screw Into Wood Without Drill [ ❤️️❤️️ ]”.

Posts “How To Screw Into Wood Without Drill” posted by on 2021-10-30 22:47:42. Thank you for reading the article at

Rate this post
Back to top button