How To Root A Verizon Galaxy S3

WARNING! Your device may void its warranty if you follow the procedures provided on this page. You are solely responsible for your device. We will not be liable if any damage occurs to your device and/or its components.

INSTRUCTIONS: ROOT VERIZON SAMSUNG GALAXY S3 SCH-I535

Before you get started with the instructions below, make sure your Android device is fully charged – at least 50% of its battery. STEP 0: CHECK YOUR DEVICE MODEL NUMBER To make sure your device qualifies for this, you must first confirm its device model number. in the ‘About device’ option in Settings. Another way to validate the model no. by searching for it on your device’s packaging box. It must be SCH-I535! Please know that this page is only for Verizon’s Samsung Galaxy S3. Please DO NOT try the procedures given here on other variants of the Galaxy S3 (including AT&T, T-Mobile, US Cellular, and International Ones S3 devices) or on any other Samsung device or any any other company. You have been warned! STEP 1: BACKUP YOUR DEVICE Back up important data and stuff before you start playing here as there is a chance you will lose your apps and app data (app settings, progress games, etc.) and in rare cases, internal files For help with Backup and Restore, see our exclusive page linked just below.Read more: How to remove virus -withdraw from cyberpunk chip install proper driver and work on your windows pc to be able to successfully root your Samsung Galaxy S3 phone Verizon. SAMSUNG DEVICE CONTROLLER INSTALLATION INSTRUCTIONS STEP 3: INSTALLATION GUIDE DOWNLOAD Download the CF Auto Root file provided below and move it to a separate folder on your computer (just to keep everything more tidied). LINK FILEDOWNLOAD CF AUTO ROOT | Filename: topqa.info (12.54 MB) STEP-by-Step INSTRUCTIONS Example video: If you haven’t used Odin before to flash a file on your phone, we recommend watching a video first. about that to familiarize yourself with the process. Video demonstrates flashing Restore on Galaxy S3, but since the process is the same it will help you: Click here to watch video Read more: How to use zANTI Android Hacking app (Full Guide) | Top Q&AImportant note: Back up important files stored on your device’s internal SD card, so that in case a situation arises that requires you to do a factory reset after flashing CF Auto Root, this can also erase the card SD inside, your files will remain safe on your PC.

Extract/Unzip the CF-Auto-Root, topqa.info file on your computer (preferably using 7-zip freeware). You will get the following files:

Odin3-v1.85.exe
Odin3.ini
CF-Auto-Root-d2vzw-d2vzw-schi535.tar.md5

Disconnect the Verizon Galaxy S3 from the PC if it is connected.

Double-click the topqa.info file to open Odin.

Boot your Galaxy S3 SCH-I535 into Download Mode:

First, power off your phone. Wait 6-7 seconds after the screen turns off.

Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home screen.

Press Volume Up now to proceed to Download Mode.

Connect your Galaxy S3 to your PC. Odin window will show Added !! message in the bottom left box. Odin’s screen should look like this: If you don’t get Added! , here are some troubleshooting tips:

Make sure you have installed the drivers for your Galaxy S3 as mentioned above in the ‘Before you start..’ section.
If you already have the drivers installed, uninstall them and install them again.
Connect using another USB port on your PC.
Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that is new and of good quality.
Restart your phone and PC then try again.

Load the firmware file (unzipped in Step 1) into Odin following the instructions below:

Click PDA on Odin and select the file topqa.info5 (from step 1). Your Odin window should look like the screenshot below:

Now in the Options section of Odin, make sure that the Re-Partition box is unchecked. (The Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)

Double check the above two steps. (Step 6 and Step 7)

Click the Start button to start flashing and wait until you see a PASS! in the top left box of Odin.

When you get the PASS! notification, your device will automatically reboot. You can then disconnect your phone from your PC.

Odin 3.09 Samsung Galaxy Odin devices screenshot

If you see FAIL instead of PASS in the top left box of Odin, that’s a problem. Try this now: disconnect your Verizon Galaxy S3 from your PC, close Odin, remove the phone’s battery and put it back inside after 3-4 seconds, open Odin and then repeat from Step 2 of this guide again. If device is Stuck when establishing connection or on any other procedure try this: disconnect your Verizon Galaxy S3 from PC, close Odin, remove battery of phone and put it back inside after 3-4 seconds, open Odin and then repeat from Step 2 of this tutorial again.NOTE: It may happen that your phone won’t automatically boot into recovery and root your phone. In that case, follow the procedure above except in Step 7, Auto-restart option is unchecked and then the instructions below:

Remove the battery and reinsert it.
Boot your Verizon Galaxy S3 into Recovery Mode: Press and hold these 3 buttons together: Volume Up + Power + Home screen.
This will now start the rooting process and will automatically reboot the phone when the process is complete.

That is all. If you need help with this, feel free to ask us in the comments section below. Let us know how you plan to use root privileges on your Verizon Galaxy S3. Your suggestions and queries, if any, are most welcome! Read more: how to write deaf characters | Top Q&A

Last, Wallx.net sent you details about the topic “How To Root A Verizon Galaxy S3❤️️”.Hope with useful information that the article “How To Root A Verizon Galaxy S3” It will help readers to be more interested in “How To Root A Verizon Galaxy S3 [ ❤️️❤️️ ]”.