How To Reset Brake Light On Bmw

This guide provides instructions on how to reset the BMW brake lights using a number of different methods. light on bmw Read more: how to make a tiki statue These steps will work on BMW, including models such as 1-series, 3-series, 5-series, 6-series, 7-series, x1, x3, x5 .

Before you start

Contents

Perform the following steps quickly.
In some cases, you may have to perform the BMW brake reset procedure more than once.
The BMW brake light reset procedure can be done for the front or rear brakes.
Brake pads must have at least 80% of their life left.

Procedure

Turn on the lighter but don’t start the engine. If your BMW has a START button, press it without pressing the brake pedal.

Make sure the time is displayed in the center of the instrument cluster.

Press and hold the ODO reset button for about five seconds. First, a yellow triangle will show up on the dash. Keep pressing the ODO reset button until the next icon appears.

Press the ODO reset button a few times until you see the icon for the front or rear brake. It depends on the sensor you replaced and want to reset.

When the icon for the desired brake system is displayed on the display, press and hold the ODO reset until you see the word RESET below the icon.

When the word reset shows below the brake icon, quickly release the button and press it again. Continue holding the ODO reset button until the brake light disappears.

The mileage should change to -, indicating that the reset was done successfully. The next time you will be prompted to change your BMW brakes is 25000 miles for front brake and 31000 for rear brake, even although these periods may vary between models.

Alternative method to reset BMW brake lights

Insert the key into the socket. Turn on the engine but do not start the engine.

Press and hold the BC button until the time and distance are displayed on the center of the instrument cluster.

Next, press and hold the ODO Reset button. A yellow triangle will show up first. Keep holding down the ODO reset button until you see the next icon on the screen.

Press the Check button on the stem of the steering column until you see the Front or Rear brake icons.

While the Brake Light is displayed on the dashboard, press the BC button until the words RESET are displayed below the brake symbol.

Next, press and hold the BC button until

How to reset BMW brakes with scan tool

Reset the BMW brake light with Foxwell for BMW Read more: how to attach the scope to the brake light The following method shows you how to reset the brake pad sensor on your BMW using different OBD2 Scanners for BMW. If you cannot reset the brake light, check the condition of the brake on the opposite axle. of the rear brake pads. Read more: How to style a female polo t-shirt

frequently asked Questions

Why won’t my BMW brake light restart?
- The BMW brake light reset procedure must be performed after you have reset the front or rear brake pads. It is best to replace the brake wear sensor as well. In some cases, the brake wear sensor may be damaged during installation, in which case you will not be able to reset the brake light.
Which BMW models will these instructions work with?
- The above instructions will work on many BMW models including models like E30, E90 F30 F10 E39 E83 E92 E70 E87 E93 E92 E30 E36 E38 E34 etc.