How To Replace Toner In Brother Printer Tn 420

To order your replacement cartridge for this printer, refer to the following part number: N5480 (OEM # TN-450, TN-420)IntroduceThe original cartridges included with this machine can be starter, standard, or high-yield cartridges. When the ink is almost out, INK TONER The LED indicator will blink continuously until replaced. When the toner cartridge is empty, the printer will enter “REPLACE TONER” mode, which will stop printing until the ink cartridge is replaced. New and unused toner cartridges will reset to “REPLACE TONER” mode. Read: how to replace toner cartridge in brother tn 420 . printer Before startBefore you begin, please take the time to perform the following steps to ensure that your Brother printer correctly detects the new toner cartridge:

  • Check that the dial to the left of the cartridge is in the position as shown in the image below. Otherwise, rotate the dial counter-clockwise until it matches the position in the photo.Suitable dial position for Brother TN-420 / TN-450 . toner cartridge
  • Check to make sure that the printer is powered on during the entire process. Changing the toner cartridge when the printer is powered off will Not reset to “REPLACE TONER” mode. In the event that the printer is powered off when the toner cartridge is installed, you will need to remove the cartridge and repeat step one before reinstalling the cartridge.
  • In case your machine fails to reset from “REPLACE TONER” mode, click here for instructions on how to reset “REPLACE TONER” mode manually.
  • Read more: how to make a crib for a baby dollReplace ink cartridge

  • Make sure the machine is powered up.
  • Open the front cover of the machine.Open the front cover of the Brother HL-2240 . printer
  • Remove both the drum unit and the toner cartridge assembly.Remove the Brother TN-420 drum and toner cartridge assembly.
  • Push down on the green locking lever and remove the toner cartridge from the drum unit.Remove the Brother TN-450 toner cartridge from the drum unit
  • Open the new toner cartridge package. Hold the toner cartridge level with both hands and gently shake it from side to side several times to evenly distribute the toner inside the cartridge. Read more: How to make a loom out of a picture frameGently shake the Brother HL-2220, HL-2230, HL-2240, HL-2270, HL-2280 toner cartridges
  • Pull out the protective cover.Remove the protective cover from the Brother MFC-7360, MFC-7460, MFC-7860 . print cartridge
  • Place the new toner cartridge firmly into the drum unit that you hear and feel the cartridge lock into place. If successfully installed, the green locking lever will lift up automatically.Insert a new toner cartridge into the drum for your Brother HL2220, HL2230, HL2240, HL2270, HL2280 printer
  • Clean the main corona wire inside the drum kit by gently sliding the green tab from right to left and from left to right several times. Cleaning corona wire in Brother MFC7360, MFC7460, MFC7860 . drum setsNote: Be sure to return the tab to the main position (^) (1). Otherwise, printed pages may have vertical stripes.
  • Reinsert the drum unit and toner cartridge assembly into the machine. Close the front cover.Reinstall the Brother TN-420 / TN-450 . drum unit and cartridge assemblyRead more: how to make au turn on the motorbike
    • Note: DO NOT turn off the machine’s power switch or open the front cover until the “Ready” LED is on.
    See Also  Beagle bagel chicken salad recipe
  • Last, Wallx.net sent you details about the topic “How To Replace Toner In Brother Printer Tn 420❤️️”.Hope with useful information that the article “How To Replace Toner In Brother Printer Tn 420” It will help readers to be more interested in “How To Replace Toner In Brother Printer Tn 420 [ ❤️️❤️️ ]”.

    Posts “How To Replace Toner In Brother Printer Tn 420” posted by on 2021-11-01 18:43:41. Thank you for reading the article at wallx.net

    Rate this post
    Back to top button