How To Replace Price Pfister Kitchen Faucet Cartridge

While it may not be difficult to do it yourself, without experience and know-how it always becomes difficult if you don’t know how to change the cartridges in the Price Pfister 2 handle kitchen faucet. deal with such things and you is a complete newbie. You don’t want things to get messy. Read: how to replace a pfister kitchen faucet cartridge Price The best part is that even a first timer will easily get the job done with the right guidance.

Faulty 2-handle kitchen faucet?

2-handle kitchen faucets typically deliver built-in hot and cold water, with each handle subject to different extreme temperatures. With the Price Pfister 2-handle faucet, each handle has its own ink cartridge. How do you know which cartridge is damaged? Just feel the water coming out of the Faucet as it is almost obvious that only one of the cartridges is faulty. If the water is colder, the cartridge of the handle with hot water is faulty and vice versa. However, if you suspect that both cartridges are defective, there is no harm in confirming and correcting the condition.

Replacing Cartridge in Kitchen Faucet 2 Handle Price Pfister

Let’s learn the basics of cartridge replacement of the Price Pfister 2-Handle Kitchen Faucet. Basically, you will need the following;

A Phillips screwdriver
pliers
An Allen wrench
Grease for plumbers

You will need these tools whenever you attempt to repair a Price Pfister kitchen faucet. We will now go through the simple steps involved in replacing the cartridge;

Clear your workspace

The first step is to make sure that your workspace is conducive to the task. Basically, make sure you have all your tools with you before you start work, then clear out anything that’s in or around the sink. I mean, it’s a kitchen sink, so there’s bound to be some stuff lying around it, next, turn off the water to ensure a convenient workspace. You can actually disconnect the water from the main house’s water supply to ensure that no drops will affect your operation.

Remove the handle from the faulty faucet

Read more: how to have a romantic dinner on the beach Check where the screws on the faucet handle are. If you cannot locate the screws, it means your Faucet is hidden. Look for lids, the material is usually plastic. Remove the cap from the Faucet to remove the screws. Using a Phillips screwdriver, remove the screws, turning the screwdriver counterclockwise until the screws come loose. Then, use your fingers to unscrew the screws until they come out of the handle. You don’t even need much force or pressure to pull the handle.

Unscrew the nut on the Faucet

Below the handle is another block of the cartridge, called the retaining nut. Using the pliers, loosen the nut, turning the pliers counterclockwise until the nut is loose enough. Then you can use your finger to rotate it faster until you pull it out. need it with your new cartridge.

Already on ink cartridges?

When you remove the nut, you will now be faced with the Price Pfister faucet cartridge. During the installation of a new toner cartridge, you can then remove it by pulling it up. If it is difficult to remove by hand, you can use pliers to pull it up more easily.

Install a new replacement toner cartridge

If you don’t have a new cartridge or are new to your cartridge type, you can take a picture of the cartridge. Send photos to your supplier, because there are different models.This way you can get an exact compatible cartridge for your faucet handle. The new cartridge may have a retaining nut, but if it doesn’t, remember that you can always use the cartridge from your old cartridge. Read more: how to do a quick weave on natural hair If it’s still in good condition, take advantage of it rather than buying a new one. on the Faucet Then apply plumber’s grease to the outside of the cartridge, around the o-rings. Do not use too much as this will lead to waste and you only need to smooth out the cartridge rings. . Once it is well established, you can push it until it is in the desired position.