How To Repair Broken Fiberglass Tent Pole

Do you have a tent with a broken fiberglass pole at home? Did your tent pole break at the campsite?broken tent poleWhen you camp often, there is a high chance that your equipment will be damaged. Accidents keep happening and your pole can break too. In this regard, I give you some practical tips for getting your fiberglass pole repaired so you can get back to camping in no time.

Repair broken fiberglass tent poles like a pro

Contents

When the fiberglass poles of the tent break, most people think that this is the end of camping and they will have to buy another shelter. They don’t know how to fix broken power poles. Are you thinking so? You don’t have to opt for this harsh measure. With a little training and the right equipment, you should be able to fix your tent. Take a look at the process of repairing a broken fiberglass tent pole.

Pole tent repair kit

tent pole repair kitThe supplies that you will need for this process include; Ø Replacement tent pole A small hacksaw Sandpaper Read more: how to use the blur tool in pixlrØ Duct tape A mask

Progress

Fiberglass poles used to support tents are usually made of loose pole segments held together by an elastic rope. The elastic cord, also known as the shock cord, runs the length of the poles and it is knotted at both ends. You will have to replace it to regain proper function of the tent. The procedure is as follows: Measure the exact part of the tent pole to be replaced. Cut the new piece a little longer to get enough working material. You will be using a hacksaw to cut the fiberglass pole and you should wear a mask when cutting. It will prevent fiberglass shards from getting into your eyes. To ensure that you cut the correct length of the replacement column, use masking tape to hold the column in place as you make the cut. This will prevent the formation of debris as you will be able to cut in an orderly manner.

  • Remove the tape from the column and sand the edges of the column to a smooth surface.
  • Place the entire tent pole on the floor and begin to untie the knot at the end closest to the part to be replaced. Use needle-nose pliers to remove the end of the knot from the pole as you can’t reach it with your fingers. The knot may have been tied tight and you may have to cut it.
  • Hold the shock cord and remove the poles carefully until you reach the broken part that needs replacing.
  • Remove the damaged part and replace it with the part that you prepared.
  • While you’re still holding the shock cord, re-tighten it over the terminals you’ve temporarily removed. Make sure to return the poles the same as you found them because the sections have different lengths and diameters. If you mix them together, your tent may not stand.
  • Tie a knot at the end of the rope and make sure it is taught just like you found it. The rope holds the stakes in place and gives the tent a defined structure. This is why you should make sure it is taught enough.
See Also  How to make chamoy pickles

If you notice this doesn’t happen when you set up your tent later, take the end of the shock cord and adjust the knot. You can do this from either end of the poles.

Use pole repair sleeve

Another way to fix the problem is to use a pole repair sleeve. This is one of the fastest fixes using the short pole or so-called brace that is usually supplied with the tent you purchase. for the worst.pole tent repair sleeveRead more: How to pronounce jhene aiko So, how to fix tent pole with brace? First, align the two broken pieces of rope. If the post is not broken, simply bend, slowly straightening the bend. Place the splint on top of the post so that it completely covers the problem. You can help yourself with pliers to straighten the bends. Wrap each end of the pole with duct tape or other heavy duty tape several times and it’s done.

Use tent stakes

You have another option if you don’t carry a repair kit or pole repair sleeve. If your pole is broken, you can use a stake to join the two broken parts together. If each is straightened it with pliers. Now take the stake and align it next to the broken part, it should be centered by the broken parts. The final step is to use duct tape or another heavy duty tape to secure all the parts together.

How do you replace a shock cord?

Is the shock cord at your terminals broken or no longer elastic? It’s time to replace it in these cases.change shock cord

See Also  Showing different ads per language with WPML

Step 1

First you have to know how the shock wire is connected so open the terminal to see the wire. In most cases, the pole will have a metal or plastic tab that you can pull out to fix the wire.

Step 2

Mark the poles with numbers so you’ll eventually know how to connect them together. Take off the old shock cord, pull it out, and lay it down so that you cut a new rope of the same length.

Step 3

Take the new wire and attach a tab to its end. You are now ready to thread the wire through the pole. When you thread the last pole, pull the wire tight to cut it with a clip or vise clip.

Step 4

Finish the process by attaching the core to the terminal and tying the loose end.

Save money

Tent poles often break, but that doesn’t mean you’ll have to take down your tent and buy a new one. You can repair a broken power pole yourself. With my advice you can repair a broken fiberglass tent pole without any hustle.Read more: how to hack cable TV signal | Top Q&A

Last, Wallx.net sent you details about the topic “How To Repair Broken Fiberglass Tent Pole❤️️”.Hope with useful information that the article “How To Repair Broken Fiberglass Tent Pole” It will help readers to be more interested in “How To Repair Broken Fiberglass Tent Pole [ ❤️️❤️️ ]”.

Posts “How To Repair Broken Fiberglass Tent Pole” posted by on 2021-11-05 21:55:30. Thank you for reading the article at wallx.net

Rate this post
Back to top button