How To Remove Bubbles From Window Tint

Video How to Remove Bubbles from Window Color Paint Sunshine can be a great way to reduce glare and keep your car’s interior cool in the sun. But bubbles appearing in the movie are inevitable for any driver. Not only do they look unsightly, but they can also obstruct your view. Follow our 5 tips to remove bubbles from your window colors and your windows can look as good as new. Let’s go!

1. Consider whether you should do it yourself

Contents

Before you get stuck, it’s a good idea to take a moment to consider whether you should solve the problem yourself. After all, you paid the experts so you don’t have to face this problem. In many cases, the work will come with a warranty, so defects like bubbles in your paint should be covered. Read the conditions carefully so you are aware of any fine print that may affect your claim. Any establishment worthy of salt should stand behind its quality work. So, if bubbles have appeared in your brand new tone, they should remove them for you. That could be a repair or, if necessary, a replacement with new film. alternative is a better option. Trying to fix colors where the glue breaks with age will at best be a temporary solution. You can fix some bubbles, only to find new ones appearing soon after. yourself, only to spot bubbles later – read on! There may be no need to scrape them off and start over, instead, check out our suggestions and tips for getting rid of them. You will avoid the cost of a new tinted film and save time installing it on your windows. And perhaps best of all, you’ll be satisfied with a job well done.

2. Heat up

Before you start doing anything with your shades, you need them to be flexible. Otherwise, they may split or burst when you approach those bubbles. A great way to solve both of these problems is to apply heat. There are a number of different approaches you can use to accomplish that. When the weather is warm, a good way to start is to put your car in the sun. Solar heat can be very effective in heating the film on your windows. And it will also penetrate the membrane and heat up the glue underneath. Pick a day when the temperature is at least 75 degrees F and park in a place away from any shade. Then just leave it there for an hour or so while the temperature rises. However, for best results, you cannot beat the heat directly. Place the heat gun near a window to heat the film. And if you don’t have a heat gun, a hair dryer will work just as well. Just make sure you have an extension cord long enough to reach your car. Apply heat for a few minutes to the window you want to work on. Don’t try to do the whole thing at once. You may find that after you finish working on one window, the other windows will cool down again. If you have a garage, plug in a portable heater. Even with a heat gun, the window can cool back down quickly if it’s cold outside.

3. Use soapy water

The next step to ensure the film is flexible enough to use is to use soapy water. By far the easiest way to apply is to use a spray bottle. The kind you use to mist your houseplants’ leaves is ideal. They are inexpensive and will be available at most home appliance stores. Fill the bottle three-quarters full with water, then add liquid detergent before shaking. Add detergent last to prevent the bottle full of soap bubbles from spilling out when you add water. You should prepare a bottle of soapy water before you start heating the membrane. That way, you’ll avoid losing heat when searching for a spray bottle in your home. Apply soapy water as soon as you’ve heated up the window you want to work on. Spray generously over entire surface. The heat will interact with the water and make both the color and the adhesive underneath a lot more flexible. And that will make your job a lot easier.

4. Pin it there

Now that the film is very malleable, you are ready to start attacking those bubbles. And for that, you’ll need a sharp pin. A safety pin will do the job perfectly and it will give you a larger area to grip on. That will help you achieve better goals. As we will see shortly, that is very important. Read more: how to remove rainx from windshield Use a pin to make a small hole in the center of each bubble. If you’re worried about poking holes in your carefully applied colored paint – no need! As long as the paint isn’t old and it’s nice and malleable, it will seal back on its own. That’s why you should spend a lot of time on the previous steps before pulling out that pin! Technique is also very important here. Be gentle as you poke the pastel and just pin it directly into the center of the bubble. If you puncture the film at an angle, it will tear very easily. And no matter how well you prepare your windows with water and heat, it’s not something that can fix itself. The larger end means a larger surface area for grip and will help you aim effectively. It’s a good idea to re-spray the window several times so that the part you’re working on stays uniquely flexible.

5. Iron those bubbles

For this stage, you will need an object with a straight and solid edge. A rubber broom is ideal. If you’ve invested in a professional rubber kit to apply your shades, take it out again for this. But if you don’t have a rubber broom, don’t worry. A piece of hard plastic will also do the job well. An old credit or debit card would be perfect. You want something that’s not too pliable but can withstand a bit of pressure without cracking. Now select the bubble you want to start with and apply your tag or spoolie to the film. Make sure you hold it at a 45-degree angle to the surface of the window. You need to start at the outermost edge of the bubble. Press down firmly and slide the card towards the center, where you made the pinhole. Use long, smooth strokes and take your time. That way, you’ll minimize the risk of the film ripping. What you are doing here is directing the air captured after the film towards the pinhole. When it reaches it, it will be ejected through the opening. When the air is blown out, the adhesive and film can stay on the window again. Keeping the film flexible is equally important in this part of the process. If you’re working inside, keep the garage warm. And just like you did when making the pinhole, keep the film wet. Keep that soapy water bottle and spray on windows often.

Ready for bubble-free colored windows?

We hope you enjoyed our top 5 tips for removing bubbles from window color. With just care, patience, and a few simple tools, your windows can be back to bubble-free again. That will make your car look smarter, as well as improve visibility when you’re driving or backing up. You may find that you have invalidated the cap if you later try to claim it. But if you’ve been doing the installation yourself, it can be very rewarding to use the DIY method to pop the bubbles. We hope our suggestions and tips will help keep the process going. And if you’ve done this yourself, comment and let us know how it went! Read more: How to cut hair extensions? | Top Q&A