How To Put Windows In A Shipping Container

Video How to put a window in a shipping box I installed my first window frame and I’ll have it done in a moment. But first, in my last post, I mentioned that we ordered some bricks for the columns at the front gate and for the two columns of the garage boots. On the expected delivery day, a nice lady at Elmec company called to say that they will only deliver half of the order because they are still looking for the rest of the order which the computer says is available. on hand. put the window in a shipping crate. “Keep your horses,” I said. “All or nothing, please.” I know what it’s like here, and I know there’s a good chance the second half will never be found and I’ll be stuck. Sure enough, a few hours later, she called back and said the balance was nowhere to be found. So Cynthia and I made a quick trip to the city and picked another tile. This one, also porcelain, looks like slate and has a bit of green cast to it. Here is a photo:There will be another week delay as they only deliver here on Wednesdays. As promised, all orders arrived on schedule. However, the truck driver was a Post-Human-In-the-World, and quickly backed off our lane and into the muddy ditch. To his surprise, I easily towed the large truck for free with the Honda Ridgeline and tow rope. He suggested that I back the Honda onto his truck, and we would forward, his truck to my truck to the house. We started, ordering about 25 Honda cars. But it is raining with gusty winds and I can see that this is not going to be fun. I spoke my best Spanish and said, “No, no, no, no!” I dug my heels into the mud and told him he would have to use a different, better route and get the truck back home. I’m not going to do this 500 brick plus 13 grout jump. . The rest is unusual, and the deposit now looks something like this. I’ve done my work for myself:I mentioned all of the above first because this tile delay took me two weeks to fill. I decided to mount the window frame in the white wall between containers 3 and 4. I cut the hole with an angle grinder because it works more neatly than a torch, although both options work well. I installed the frames just as I did the door frames. Here I am fitting the dry frame to the opening:After it was flush with the plumbing and flat, I welded the frame in four places, sanded the welds and, using a pneumatic solder gun, sealed the joint with black urethane windshield sealant:Next, I welded the guard bar to the window frames and gave everything a first coat of polyurethane oil red oxide primer: Read more: The Raven Guard | The top Q&AI did the hinge a while ago:I also soldered short angle iron pieces to the window frames and guard bar frames, pieces with alignment holes for bolts or padlocks when the guard bar frame is closed: You can view the installed window frame assembly in next photo. This photo is my new banner image at the top of the blog; I will change it from time to time because of the guaranteed visual progress:I still have to install the glazing, but I’m waiting for a while so it won’t break during construction. For another time-filling project, remember that I’ve created templates for potted plants in the past:Armando and I poured the concrete according to the pattern and I put a finishing broom on it. I’m letting it cure for a month or so:Then I noticed that the construction site is very messy:So I spent two days cleaning this area and it looks so much better. I also sprayed four parts of the potential paint color onto the white board. It’s close, but it emits too blue. We want the same color only with green (more sage but not sage color) if that makes sense to you. I will choose a different color next time I come down the mountain. I also took some time and removed all the decals on doors 3 and 4. It was an easy process; I use a propane torch (a heat gun can work as well), heat the decal for a second or two, then the decal comes off easily. The trick is to get the decal and surrounding metal just hot enough to activate the adhesive but not so hot that it doesn’t melt the decal or cause blisters on your fingers. Here’s a photo: I ended up with the little scrap pile shown in the next photo. I planted the Armando flag in the recycling truck, and along with a flat bag of Coke cans, Armando picked up an extra six dollars in his pocket for the day. I always give him recycling money; it’s not much for me but a big motivation for him: Read more: how to fix amd quick stream errorSee, what else happened? Oh yeah, Armando put topcoat (plaster) on the squat wall in the garage: And the garage roof above the door of container 4 was still unfinished so one day I settled that : This finished roof area looks like this from below:So that was my last two weeks. I’m excited to start the bricklaying, but that will take a while, as Cynthia and I will be heading to Texas in at least a week. It’s a very personal story, and if all you want from this blog is information about building a shipping container home, then you should stop reading now. What follows, on the other hand, is an intimate look at our lives together. I want to tell the following story as a tribute to the woman I love, my wonderful wife, Cynthia. She was facing a life-changing, disabling and medically traumatic injury. She’s not always agreeable about it, and neither am I. Although we’ve both gone through a few years of marriage and grueling personality tests, I’m still amazed at her grit and determination to recover. Not a day goes by that I am not impressed by her relentlessly innovating fight to improve her life and ours together. Thank you Cynthia, you are the definition of bravery As some of you know, a year ago last November Cynthia had open heart surgery at the Cleveland Clinic in Ohio. They replaced a broken heart valve, and in the process, something went very, very wrong. For whatever reason, she didn’t get enough oxygen to her brain for a long time. As a result, she suffered brain damage in multiple regions of her brain. When they got her out of the anesthetic, she had a seizure, so they kept her in a medically induced coma for almost ten days while they tried to figure it out. We don’t think they didn’t figure it out, but they were able to finally get her out of her coma. Damage has been done. Since then, despite numerous changes and adjustments to her anticonvulsant/epileptic medications, she still has seizures nearly every night; three or four or five of them, and they last from ten minutes to an hour each. I woke up with every twitch, stroking her hair, keeping her from falling out of bed, and neither of us got enough sleep. A lot of her motor skills were also affected and she worked hard and long to regain the functions that the surgery took away. I give Cynthia a big, huge credit; I have never met a person more determined to overcome her serious medical trauma. Yes, the surgical team saved her life, and that’s remarkable, but other than that I don’t give her doctors much credit; The surgeon just told me that the surgery “went very well with no problems.” Add to that the seizures as a side effect of the ineffective medication plus the debilitating headaches, and it was a very difficult time for both of us. went to an epileptic hospital in the United States and was given the medication back and had no seizures. That started Cynthia on Google frantically searching for answers, and as a result we went to an epilepsy hospital in Texas, initially for a week of checkups. The results of those tests will determine future medical tests and possible “curative” actions. Here are a few pictures of Cynthia during and after the haircut that I gave her in preparation for the electrode week she will have to endure on her head in the hospital: So my blog will be silent for a while. a few weeks, I hope you will understand. Thank you for stopping by Read more: how to get rid of chicken coop smell Read more: how to get rid of chicken coop smell