How To Put A Razor Blade In A Box Cutter

How to replace a utility box cutter blade

The box cutter, or utility knife, is a great tool to be found in most warehouses. Designed with a small blade, these knives are capable of quickly slicing open cardboard boxes, removing packing tape and other wrapping materials used during shipping. Due to overuse of box cutters, they are often made from very hard plastic or metal. Many warehouse workers consider utility knives as junk. As soon as the blades wear out, warehouse workers will usually start looking for a new one. Luckily, your company doesn’t need to waste money over and over again buying a new box cutter every week. The simple fix is ​​to simply replace the blade. And the best part? They often come with extras! Read: how to fit a razor blade into a box cutter

Open the Utility Knife

The first step when replacing a box cutter blade is to learn how it opens. In our example, we simply used a Phillips head screwdriver and unscrewed a screw on the side. After removing the screw, you can simply pop the top off to split the knife in half.

Identify components

There are really only five components to our utility knife. Replacement handle, screw, blade, blade cover and blade pack. Once the blade has been opened, we can remove the cover and blade from the knife. Read more: how to draw a gift box step by stepMake sure that when you reach this point, you pay attention to how the knife sits in the sheath. With this in mind, you can remove the knife from its sheath and safely dispose of it.

Replace the blade

Replacement blades are usually packaged in a small package. They usually come in sets of three to five. You will want to carefully remove these blades from the knife handle so you don’t cut yourself. Then, open the blades and take one blade out of the package. After you have a new blade, place the other blades in the handle. Now, take the new blade and place it inside the sheath in the same way as the old blade. The blades in this knife have a two-groove system that needs to be correctly placed back into the sheath. This creates a good grip on the blade.

Put the box cutter together

Read more: How to Make Bows and Arrows Part 3 At this point we’ll start assembling the box cutter. Place the blade and sheath back on the handle, make sure the auxiliary blades are in place, and then place the end of the handle back on the underside. Then screw the screw back into place and your utility knife is as good as new.* When screwing back into place, you want to make sure that the screw fits snugly but is not over-tightened. If you over tighten the screw, it will compress the handle and catch the movement of the blades in the handle. To minimize this, tighten and then test by opening and closing the box breaker a few times to make sure it is at a comfortable level of resistance to opening and closing.

Our thoughts

We’re using a standard metal box cutter in our example, but the multiple blades work in the same or very similar fashion. Using these blades will save your company a fortune in the long run. Make sure you educate staff on additional blades (if any) or have an employee who can change them available to change blades for other employees. The type of box cutter we used, after about five minutes of first use, we were able to change a blade in about two minutes. It’s significantly cheaper to have someone change the blades than just buying more. Read more: How to make Plastic Dice – Dice Casting Instructions | Top Q&A

Replace a utility knife & box cutter

Last, Wallx.net sent you details about the topic “How To Put A Razor Blade In A Box Cutter❤️️”.Hope with useful information that the article “How To Put A Razor Blade In A Box Cutter” It will help readers to be more interested in “How To Put A Razor Blade In A Box Cutter [ ❤️️❤️️ ]”.

Posts “How To Put A Razor Blade In A Box Cutter” posted by on 2021-10-22 08:21:09. Thank you for reading the article at wallx.net