How To Plane A Board Without A Planer

So you need a flat board for your woodworking project, but you don’t have a planer. Do not despair! There are several different ways to achieve the results you need.Read: How to plan wood without a planer Continue reading our guide on how to plan wood without a planer.

1. Using a table saw


Using a table sawIf you have a big board to board the plane, saw table could be a good choice. First you will need to craft a jig to hold your board in place. That can be quite a time consuming task. But get to work right from the start and with the use of the saw you will quickly achieve excellent results. It could be that the table saw is not at a perfect 90 degree angle. Adjust it using a technical square and the problem should go away. The other problem that you may face is the burn marks. These things can happen if you do not continue to move the board smoothly relative to the saw. Then, when you actually plan the board, you will confidently feed it smoothly. This YouTube video from DownUnderWoodWorks shows the entire process step by step.

2. Using a router

Using a routerYou can use a router as an alternative to wood planing machines in the same way as a table saw. Again, you’ll need to craft a jig so that your wood passes the router at the right spot. The fixture is basically a properly sized wooden frame to hold your board in place. Place the board in place, then push the fixture through the router so that it cuts the face of the board. As with the planer, you’ll want to work in the direction of the grain, like the table saw option, which is a case of doing the job right from the start. All the effort here is in building jigs. Once done, the router will cut the board quickly. Be prepared to spend time sanding to get a quality finish.

See Also  How to cook rockfish on the grill

3. Using the size plane

Using the size planeIf you don’t have an electric planer, one option is to go old school and use a manual planer. The traditional advice is to invest in three different planers. Start with the scrub plane, then move on to the join plane, before finishing with the smoothing plane. It’ll just take a little longer, you’ll want what’s called a #5 or #6 plane. The numbers refer to the size of the sole, and the higher the number, the longer the sole. The number 5 or 6 should give you enough length to eliminate any imperfections in the board. That will avoid ending up with a wavy surface. Let’s use a straight edge to define the high points and start with those. Work slowly with the jack plane and continue testing with your straight edge. Placing the two shorter sticks on the board and looking across them will allow you to check that it is also horizontal. (Those shorter clubs are called coils.) This great video by Christopher Schwartz shows you how to do it step by step.

4. Use a wide or drum sander

Use a wide or drum sanderWide belt and drum grinders work in a similar way to electric planers, but they use sandpaper instead of a knife. They are often used after planing to get a nice finish. But that’s not the only way you can make them work, if you don’t have a planer, put some heavy duty sandpaper in the sander. You can then feed through the board exactly the same way you sanded it. It just takes a little longer to get your wood to the proper depth. As with other power tool options, it’s a good idea to spend some time crafting a fixture to hold the board. That will make it a lot easier to get an even surface.

See Also  How To Bring Someone Back To Life Spell

5. Take out the sandpaper

Take out the sandpaperRead more: how to change ink on hp officejet 5258 All of the above choices are based on some kind of replacement tool. But if you don’t have one of those methods, there’s another way – with good old sandpaper. And as with hand planer option, you’ll need something with a long, straight edge to test the results. Use the coarsest sandpaper you can. Wrapping it around a sanding block will also give you a better grip and create more pressure. You can buy rubber sanding blocks, but a piece of wood works just as well. speed up the never-ending work. Just don’t be tempted to press down on it like you would for a sandpaper. Doing so will impede the movement of the sanding plate and will actually slow your progress.

6. Take it to a cabinet maker

Take it to a cabinet makerIf these options sound daunting, one simple solution is to have someone else plan the wood for you! Cabinet makers will have professional planers and most will be happy to plan your wood for a fee. Be a sacrifice worth making.

Ready to plan?

We hope you enjoyed our guide to a bunch of different options for planing wood without a planer. Most rely on having access to some other form of power tool. But if you don’t have one of those, there are also manual options. The jack planer will work fine and has been doing it for thousands of years. And if all you have is time, sandpaper and a bit of wood will eventually get you there. Whichever option you choose, we wish you luck with your next carpentry project.Don’t forget to pin it!wood planer without planer 2Read more: How much does it cost to create nft

See Also  DIY Blackout Roller Shades (Blackout Blinds): A Step-by-Step Guide

Last, sent you details about the topic “How To Plane A Board Without A Planer❤️️”.Hope with useful information that the article “How To Plane A Board Without A Planer” It will help readers to be more interested in “How To Plane A Board Without A Planer [ ❤️️❤️️ ]”.

Posts “How To Plane A Board Without A Planer” posted by on 2021-10-29 16:07:20. Thank you for reading the article at

Rate this post
Back to top button