How To Paint Chevron Stripes On Furniture

A simple guide to using Chevron models

Contents

Drawing a focal wall in the bedroom is easier than you think! I wanted to share my step-by-step tutorial on how to draw chevron stripes in black, white and turquoise in just one day.Stripes have been popular for a while but combining them with turquoise, black and white is on trend! Nowadays, black and white graphics are becoming more popular in clothing and home decoration. So I can’t think of a better way than to paint a teenage room’s makeover wall. If you’ve been following my stories on Instagram lately, you’ve seen a glimpse of my painting methods behind the scenes, but those stories disappear in 24 hours and I can’t tell you who I am. How many questions have been answered? Here’s a very simple how-to guide to walk you through this 18 foot x 8 foot wall that took me less than 7 hours to complete. It’s a little more complicated than the modern painted horizontal stripes I posted earlier this Summer or the turquoise ombre bathroom walls.

Do Son

What you need to paint the wall stripes

Paint the wall one of the striped colors at least two days before you plaid. 48 hours is a safe amount of time for the paint to adhere to the wall so that when you remove your painter’s tape it won’t strip the paint off.How_to_paint_chevron_stripes_suppliesYou will need a ruler, a ruler, various sizes of brushes, tape, a pencil, a screwdriver to remove any switch plates, a small roller, a bucket of water, and rags. We painted the wall in a crisp bright white and featured the Sherwin Williams Tricorn Black stripe and SW 6767 Tame Teal single stripe as accents. We also painted the other three walls in Tame Teal. With all 3 colors we choose the Emerald paint line with the best coverage.Paint tips: Quality paint gives you better coverage so less time has to be repainted. All this contributes to a faster and better paint job.How_to_paint_chevron_stripes_ turquoise_black_white_wall_bedroom_sherwin_Williams_ Tame_teal

See Also  how to treat yellow fungus in bearded dragons

Oh, there’s math involved

Before applying any paint, I need to calculate the math part. We decided on the 9 inch stripe. Traditional Chevron is based on 2/3. So for 9-inch stripes, the distance between the points would be 12. If we wanted 10-inch stripes, I would put 15 inches apart and so on. I find the center of the wall and with the ruler starting at the bottom base, I mark a small pencil dot every 9 inches on the wall all the way to the ceiling. Once that row of dots was completed, I moved 12 inches to the right and continued to pencil another row of dots 9 inches apart until I created a pencil grid across my entire wall. I always come up with my design on paper before I start marking my wall.How_to_paint_chevron_stripes_ turquoise_black_white_wall_bedroom_sherwin_Williams_ Tame_teal_8Read more: How to get more space for ssd drive I then connect the dots starting from my first dot and going up and to the right then down and to the right with my pencil lines.How_to_paint_chevron_stripes_5

Tips and tricks for painting stripes

Using my painter’s tape, I glued just outside the pencil line so that when I paint black it covers the lines. I ran my finger over the edge of the tape to make sure it was firmly glued to the wall for minimal bleeding. Sometimes if the wall is porous, I quickly brush the base coat so that if there’s any bleeding it’s the base color of the wall.How_to_paint_chevron_stripes_6

Double-check your work

Continue until the entire wall is complete. I put a small piece of tape where I need to paint so it doesn’t get confused. Keep in mind that these stripes look uneven but the tape covers the basic white. All stripes are 9 inches wide.How_to_paint_chevron_stripes_painters_tapeI like the 6 inch roller so I can maneuver better in small spaces. If your stripes are thinner, consider a 4-inch roller cover. The combo of roller and tray set is affordable. The smaller trays are also easier to hold when you’re on the ladder.How_to_paint_chevron_stripes_4You may have to apply three coats of black stripe paint to make sure it’s completely opaque. I use a small brush for tight spaces.How_to_paint_chevron_stripes_3How_to_paint_chevron_stripesRead more: How to reset word stats Slowly and away from painted surfaces. Use a small brush to sweep over the bleeding areas.How_to_paint_chevron_stripes

See Also  How To Make Your Boyfriend Feel Bad

Big reveal

How_to_paint_chevron_stripes_ turquoise_black_whiteHow_to_paint_chevron_stripes_ turquoise_black_white_wallLet dry for 12-24 hours before sticking any artwork or frills on the wall. This is the view when you go up the stairs. What a focal wall! It’s super dramatic and eye-catching. I will add a picture when new bedding and accessories are available! Thank you for stopping by and let me know if I can answer any questions!How_to_paint_chevron_stripes_ turquoise_black_white_wall_bedroomCan’t get enough black and white? Follow my latest picks on my Pinterest board BLACK, WHITE AND LIGHT ALL! for tons of eye candy. Fun painting! xoxo Amiehow_to_paint_chevron_stripes_wall_mturquoise-black-_and_white

Share as Interest: Pin, tweet, and share this blog post.

Read more: Dryer knob broken? Here’s the information you need to replace Read more: Is your dryer knob broken? This is the information you need to replace

Last, Wallx.net sent you details about the topic “How To Paint Chevron Stripes On Furniture❤️️”.Hope with useful information that the article “How To Paint Chevron Stripes On Furniture” It will help readers to be more interested in “How To Paint Chevron Stripes On Furniture [ ❤️️❤️️ ]”.

Posts “How To Paint Chevron Stripes On Furniture” posted by on 2021-10-23 12:59:08. Thank you for reading the article at wallx.net

Rate this post
Back to top button