How To Paint Brake Calipers Without Removing Them

Video How to paint brake calipers without removingDo you want to make your car a visual highlight? Then you are exactly here! Today we dare to put your brakes together. Because what looks sportier and cooler than a striking colored brake caliper?And you don’t even have to go to the workshop to do it. We will show you how you can paint your brake calipers step by step with brake caliper paint. Not only does it look good, but it also saves you a lot of money! We’ll show you how easy the process is. Read: how to paint brake calipers without removing them

Step 1: Remove the wheel

Of course, to be able to work on the brakes, you must first remove your bike. All the work will be easiest on a raised platform, but a jack will do the job too!

Step 2: Rust removal (if any)

With the supplied wire brush, you can tackle the rust on your brakes first. It is important that loose rust particles disappear completely. Then the paint will hold better later!

Step 3: Clean the brake

Read more: How to copy unselectable text on your screen Use a wire brush and brake cleaner to remove the last of the smudges.Tip: let the brake fluid evaporate a bit. So don’t start painting right away!

Step 4: Stick the brake

You should apply the brakes properly. In particular, the rails of the guide bolts, the vent screw, the brake pad holder and the holes for the spring clamp are sure not to peel off the paint. You can also protect your brake discs with a piece of paper.

Step 5: Mix paint

The polish and hardener are pre-measured so you just mix them together. It is important that you stir well! You will even be sent a spoon for this. Reality! Then you let the paint rest for 15 minutes. And then it can begin! Read more: Fallout 4 ways to get coins | Top Q&ATip: Prepare all the brake calipers first and only then do you start mixing the paint. Once it has been touched, you have 2 good hours to apply it. So it’s better if you don’t have to brush and clean too during this time!

Step 6: Apply varnish

With the brush provided, you can now apply thin coats of paint. Make sure there are no unsightly forms of running! Don’t worry if the first layer doesn’t cover you completely, you can apply more layers until you are satisfied with the result.Tip: Let each coat dry for at least 15 minutes before you apply another. Usually, two to three thin layers are enough for good results! And? Turns out to be a really great result, right? Not only does it look good, it’s also heat and chemical resistant and even protects your brake calipers from corrosion! Read more: How to export click traces in Canton

Last, Wallx.net sent you details about the topic “How To Paint Brake Calipers Without Removing Them❤️️”.Hope with useful information that the article “How To Paint Brake Calipers Without Removing Them” It will help readers to be more interested in “How To Paint Brake Calipers Without Removing Them [ ❤️️❤️️ ]”.

Posts “How To Paint Brake Calipers Without Removing Them” posted by on 2021-11-14 10:17:24. Thank you for reading the article at wallx.net