How To Paint A Skateboard Deck?

Skateboard floors are really attractive with their variety of designs. Besides, some are colorful. You can buy them at skateboard stores and just choose your preference. Read: how to paint a skateboard Why not try painting your deck? Here are some steps on how to paint a skateboard deck and make it more appealing to you.

What you need when painting your floor

Customizing your deck with painting takes effort and skill. In addition, you will need the following documents:

  • Sandpaper
  • Spray primer or any primer
  • Stencil with the design you like
  • Ice
  • Spray paint
  • Transparent shirt

You can spend a little on these materials. However, they are worth having a complete and customized deck just for you.

Draw a skateboard deck in easy steps

I can paint-my-skateboard-floorYou can customize the skateboard floor using spray paint. On the other hand, if you are good at hand drawing, you can do that too, which will make your deck more unique and personal. Meanwhile, here are the steps to paint a deck with spray paint with the design of your choice.1. Remove the truck of your boardFirst, grab your skateboard and carefully unpack the two trucks. Store them in a safe place. And make sure the truck parts are complete when you reassemble them on the deck after you finish painting the boards.2. Sanding the bridge surfaceTake fine sandpaper or 400 or 320 sandpaper. Polish your deck in a circular motion. Polish it well. Then, take a sponge and soak it in warm soapy water. Rub soap bubbles on your deck. After washing your deck, let it dry for a few minutes. This will make your paint stick well to your deck.3. Get a TapeRead more: how to make white on diy leds Apply tape to the screw holes on the top and sides of your deck carefully. If you cannot ice them, there will be drops of water on the handles and sides of your deck.4. Apply a coat of spray or hand primer on your deckApply a coat of primer over your deck. You can use a spray primer or a hand primer. Spray the primer evenly on the bridge deck. It shouldn’t be thin or thick, just make sure it covers your deck well, being aware that you must completely dry each coat of primer before applying another. You can let it dry for at least 30 minutes for each coat of primer. Also, don’t forget to wear eye protection or a mask when applying primer.5. Flatten the sphere with sandpaperOnce the primer is completely dry, you can sand the board again with 150 grit sandpaper. Use sandpaper to remove blisters or bubbles. Do this movement gently in back and forth motions. Also, remove the sawdust from the primer once you’re done sanding with a wet cloth and rag. Then dry your deck.6. Prepare your deck designGet a piece of paper and sketch your design for your board. Design will be your preference. Consider the correspondence of the figures. Also, think about the colors you will use. You can cover your design on the board.7. Prepare colors for your designIf you are going to use four colors for your design, you must paint four layers. You can number the designs you’ve created to know which one you’ll draw first.8. Apply paint to your baseThe base color will be the background of your stencil design. Use white or black to highlight other colors in your design. Make sure to spray the foundation evenly with the color of your choice.9. Stick your design on the deckRead more: How to replace door hinges on a do-it-yourself chevy silverado-A project! Using stencils with your design, glue it to your deck. Be careful in pasting your stencils. You can use materials like cardboard, mylar, or cardboard.10. Apply Color LayersThe opening or gap in your stencil will be the color of the second layer. Spray the color of your choice evenly onto the board. You can do the same on the next layer until it completes your design. Otherwise, make sure the paint is completely dry before you apply the next coat.11. Gently remove the tape or stencilsAfter the paint dries, you can gently remove the tape or stencils. Simply drag them slowly one by one. Once done, you will see your finished design.12. Cover with transparent paintAllow the deck paint to dry completely. Then, apply a coat of clear polish giving it a clear coat of polish. In addition, it will protect your paint from the sun’s ultraviolet rays.13. Reinstall the trucksFinally, after this paint dries, you can reassemble the truck. You now have your finished painted skateboard. If you want to elevate your skateboard painting using hand paint and acrylic paint, you can watch the video below for instructions:

See Also  How To Tell An Ex You Miss Him

Key point

Painting your skateboard is fun and exciting. Simply choose a design that you like, which of course takes a lot of effort and materials. However, don’t worry, the steps mentioned in this article will guide you on how to paint a skateboard floor. We appreciate these suggestions and greatly appreciate them. Read more: how to draw forward-facing shoes

Last, Wallx.net sent you details about the topic “How To Paint A Skateboard Deck?❤️️”.Hope with useful information that the article “How To Paint A Skateboard Deck?” It will help readers to be more interested in “How To Paint A Skateboard Deck? [ ❤️️❤️️ ]”.

Posts “How To Paint A Skateboard Deck?” posted by on 2021-09-09 16:02:59. Thank you for reading the article at wallx.net

Rate this post
Back to top button