How To Make Things Transparent In Paint Tool Sai

For many artists, it’s likely that you’ll want to save transparent drawings for some time, to use them in layouts and graphics, etc. And since Photoshop is an expensive investment, and Paint Tool is SAI. (tends to lack transparency in different versions) is so common, it can be difficult to know the correct way to do this. This is where I will try to help!

Check if your Paint Tool SAI is secretly transparent

It can be a little hard to find WRONG when it comes to this, but some versions do support transparency. Here’s how to do it when you have one of those versions: Read: how to make everything transparent in paint wrong toolFor SAI 1First of all, make sure any background layers you have are hidden. SAI 1 won’t show you any checkerboxes in the background for transparency, but you can check if your drawing is see-through by filling a layer underneath with black (and then hiding it again, of course).[Pictured: A cute, see-through Nosepass with a black backgroud.]You can see the black background on this Nosepass, so it’s good to go. Make sure you hide that black layer again! From here, click File, go to Export As, select .png, and enter whatever filename you want.[Pictured: The File, Export and .png shown as stated above.]If your SAI supports transparency, the dialog below will pop up after you save it.[Pictured: A dialog box for PNG Save Options, showing 24bpp RGB and 32bpp ARGB options.]You want to choose 32bpp ARGB (Each pixel with Opacity) to get a transparent image. With any luck it will work perfectly! For SAI 2Paint Tool SAI 2 makes the transparency a little easier to see. Same as above, hide any background layers, then click on Canvas, hover over Background and select Transparent (Light Checker).[Pictured: The Canvas, Background and Transparent options as detailed above.]If your artboard is transparent, it will immediately show up with some gray checkboxes. However, for very high resolution images, you may have to zoom in to see them![Pictured: Nosepass with grey checkerboxes in the background.]And again, export it and save it. SAI 2 will handle any transparency automatically, as long as you save your file as a .png. This is very important, so make sure it’s a .png.[Pictured: Fully transparent Nosepass!]Good luck, your SAI version supports transparency!

When your WRONG version can’t make things transparent

Unfortunately, but with so many versions floating around some of them simply can’t be done. Here’s how you can solve that problem.Step one: Make sure your drawing is suitable for transparency Read more: how to get over the sin of fornication Because most art shows start with a backdrop white, including WRONG, so a lot of people don’t feel the need to fill in white (such as eyes) or clean up any bright pixels that may be leaking from the line. By creating a temporary background layer underneath everything that’s colored black, you can correct these instances and make sure they look good on any background.[Pictured: Identical Wooper drawings on a white and black background.]As you can see above, Wooper has no borders or rust on the dark background and the whites of its eyes have been filled in. Otherwise, Wooper would have black eyes and look a bit spooky! Step 2: Keep your layers in a cross-compatible format[Pictured: Wooper shown with the layers used to make its image.]For the sake of ease, it is important that you have a file with layers rather than a flat image. It’s still possible to crop a flattened drawing on a matte background, but we’ll get into that a bit later.[Pictured: Paint Tool SAI1You will ideally want to export your art as a .PSD, as seen above. While it may technically be a Photoshop file, certain free image programs are compatible with .PSD files and can be used to open and edit them.Step Three: Alas, you must download one of themWith Photoshop presumably unavailable to you, you’ll have to download a specific image-editing software to add transparency. The best choice for this is GIMP, as it’s completely free of charge to use and compatible with both Windows and Mac. It may seem complicated at first, but don’t worry!Step Four: Opening files is a struggleOnce you’ve downloaded GIMP and installed it (presumably with custom settings!), the very next step is opening it up and then opening your .PSD file in it. Be patient, as GIMP can take a while to start. It can also be a bit jarring, since by default it opens several small windows rather than one big window. But as usual, clicking on File and then Open will get you to the file selection prompt. However, I will recommend putting things you want to edit in a small and easily-accessible folder, since GIMP’s file viewer has its own interface and lists everything by filename.[Pictured: GIMPHow could this happen to me…Once you find your image, it should be smooth sailing![Pictured: Wooper…However, if you use clipping group layers as much as I do in SAI1, you may want to merge those specific ones with the layer underneath when you’re prepping the file. Whoops! As of now, I don’t know how to fix this in GIMP itself, but doing the needed edits to the .PSD in SAI is easy enough.[Pictured: Showing a layer with the Clipping Group option selected in SAI, and the layer underneath.]So, to reiterate, merge the Clipping Group layers (identifiable by the highlighted box and pink line on the side as seen above) with the layer they’re attached to. If you do it right, your images will be exactly the same, except for no breakage when you open them in GIMP. Simple! Step 5: It’s finally time to Open the permanent file in GIMP, the next step is simple: You find the background layer on your photo (whether it’s a white background or a colored temporary background) and delete it.[Pictured: The background layer is highlighted on the layer panel, with hovertext displayingThe background of your picture should change to grey checkerboxes, as you can see below. This means it worked!Read more: how to root samsung galaxy s7 sm-g930v[Pictured: Wooper with a grey checkerboard pattern background, showing that itStep Six: Saving your pictureGIMP naturally has an unintuitive way of saving images, too. Here’s what you’ll want to do:

  • Click on File, then Export As.
  • Your file will display as [filename].psd. Remove the .psd and import .png instead. You can also click the Choose File Type button at the bottom of the dialog box and scroll through the list to find a .png if you prefer that method. Now it should be [filename].png.[Picture:Wooper[Pictured:Wooper[Ảnh:Wooper[Pictured:Wooper
  • A set of options will pop up. Make sure Save gamma and Save color values ​​from transparent pixels are ticked along with other defaults.[Picture:Thedialogboxwiththeseoptionsisticked[Pictured:Thedialogboxwiththeseoptionsticked[Hình:Hộpthoạivớicáctùychọnnàyđượcđánhdấu[Pictured:Thedialogboxwiththeseoptionsticked
  • Finally export your image and cry some tears.
See Also  How to dilute tea tree oil

With that, your image should be transparent! You can tell when you click it in your folders and the blue selection color will show through![Pictured: Wooper small and see-through[Pictured: Woopersmallandsee-through][Ảnh:Woopernhỏvànhìnxuyênthấu[Pictured:Woopersmallandsee-throughFrom here, what will you use your transparent image for. Enjoy your new found power and have fun![Photo:Woopertransparentfinal![Pictured:ThefinaltransparentWooper![Ảnh:Woopertrongsuốtcuốicùng![Pictured:ThefinaltransparentWooper!

“But what if my image is flat?”

Not every image is blessed with layers, so for those cases you’ll have to do things the hard way. Depending on the style, you can zoom in really close with the eraser and remove the background manually or a simple selection trick will work. Step One: Select and remove unwanted space. your own art or real art is official, even if you have to triple check to be sure. Editing other artists’ work is not fun, while official renderings and official Pokémon images are available for anyone to use in articles and publications (and by extension, graphics) .[Pictured:SomeGlobalLinkartforPansage[Pictured:SomeGlobalLinkartforPansage][Ảnh:MộtsốnghệthuậtLiênkếttoàncầuchoPansage[Pictured:SomeGlobalLinkartforPansageSo what can we do with this official Pansage art? The lines are a solid dark color so it’s pretty safe to use a selection tool. For a program like SAI, it’s best to create a dark layer underneath (even if it’s not visible at first) and tweak your selection settings until you’ve selected most of the unwanted colors. . Anti-aliasing is what you will need to get a smooth edge, but if you are editing pixel art it will have to be selected for a pixelly edge.[Picture:Samepagewithwhitepixelsselected[Pictured:ThesamePansagewithitswhitepixelsselected[Trongảnh:Cùngmộttrangvớicácpixelmàutrắngđượcchọn[Pictured:ThesamePansagewithitswhitepixelsselectedAt this point, a good trick is to click Selection and Ascend, then use Crop to remove the white space. But for an image as small as this Pansage, it will more than likely take away some of the linework. Second Step: Quickly Repair Linework[Picture:SamePansagewithsomelinesmissingIt[Pictured:ThesamePansagewithsomelineworkmissingIt[Trongảnh:CùngmộtPansagevớimộtsốdòngbịthiếuNó[Pictured:ThesamePansagewithsomelineworkmissingItIt’s not always a perfect solution, but for a photo like this you can reselect the outside of the image, Invert the selection, Increase it (or Dilate Selection 1px in SAI2) , and fill it with the border color on the layer below. You may also have to increase it several times until it looks right. It’s not ideal, and in many cases you might want to zoom in and do some tweaking so it looks just right. At least, it’s a quick method with quick results. Step 3: Intensive editing[Picture:SamepagebuttransparentHowevertheedgeshavealittlejaggedness[Pictured:ThesamePansagebuttransparentHowevertheedgesareabitjagged[Ảnh:CùngmộttrangnhưngtrongsuốtTuynhiêncáccạnhcómộtchútrăngcưa[Pictured:ThesamePansagebuttransparentHowevertheedgesareabitjaggedYou might not be entirely happy with the way it looks at this point – this Pansage has some jagged edges along its contours and looks a bit messy. If you’re willing to take the extra step, you can zoom in and use the 1px anti-aliasing brush and 1px eraser tool to fix the edges until it looks right to you. If it is your own work that you are editing, it is entirely up to you to decide.[Picture:SamePansagebutwithsmootheredges[Pictured:ThesamePansagebutwithmoresmoothedges[Ảnh:CùngmộtPansagenhưngcócáccạnhmịnhơn[Pictured:ThesamePansagebutwithmoresmoothedgesSince this Pansage is Globally Linked art, I’m only comfortable editing the edges. It looks a lot better though, and it’s completely transparent! Just imagine all the amazing graphics I could create with such a good, transparent friend. You can make all transparent pictures if you try! The page was last updated on November 14, 2017 at 00:47 GMT.Read more: thank you for teaching me how to love | Top Q&A

See Also  How To Add Header Column To Hive Table Csv

Last, Wallx.net sent you details about the topic “How To Make Things Transparent In Paint Tool Sai❤️️”.Hope with useful information that the article “How To Make Things Transparent In Paint Tool Sai” It will help readers to be more interested in “How To Make Things Transparent In Paint Tool Sai [ ❤️️❤️️ ]”.

Posts “How To Make Things Transparent In Paint Tool Sai” posted by on 2021-10-27 13:33:14. Thank you for reading the article at wallx.net

Rate this post
Back to top button