How To Make A Seed Bead Ring Tutorial
Today, we have another free jewelry making tutorial for you! You’ll find below step-by-step instructions to show you how to make an exquisite beaded ring. Beaded rings are fun to make and they tend to work pretty quickly. Once you have your materials together, you should be able to do this project in about 30 minutes! For this project you will need the following materials: Read: seed ring making instructions
- 1 x gold or silver plated eye pin
- Beads of focal length 3 or 4 x (3mm or 4mm) – we used crystal bicones for this tutorial but you can also use round glass pearls or abrasive glass beads
- The option of grain size 11/0 grain in a contrasting color
- 2 x sparkly flat back diamantes
- Necklace in one color to match your beads
- Bead size 10 or 12 needles
- Gemstone glue
- Nose pliers ring
- Flat nose pliers
- Wire cutters
Step 1
Carefully bend the eye pin slightly to create a curve. Pick up 1 x seed, 4 x crystal bicones (or other focus particles) and 1 x seed. Step 2
Cut the eyelet wire with a wire cutter, until you have 10mm of wire next to the last bead. Use your round nose pliers to make a loop, exactly like the one on the other end of the eye pin.Read more: how to connect samsung a71 to tv with hdmi cableStep 3
This part will now form the top part of your ring. Make sure that the loops at each end of the eye pin are flat and even. Use your fingers to bend the composition a bit more until it fits snugly on your fingertips! Step 4
Thread your bead with beading thread and choose any bead you like as the stopper (you can tell it apart from your beads). To make a stop bead, simply lift the bead onto the needle, slide it down the thread, and reverse the bead in the same direction. This bead will stay in place and prevent your beads from falling off the ends of the yarn. You’ll need to keep measuring this around your finger as you work to get an accurate measurement, while leaving enough room for the top of the ring! This can be a bit confusing, but stick with it! Step 5
Read more: Irish name of the week: Gráinne | Q&A: Once you have enough seeds on the thread to make the strap, thread your needle through one of the loops in the eyepin unit and back through the beads to secure the strap to the loop. Reverse all the beads on your thread, until your needle comes out of the first bead you inserted. Then thread your needle through the loop on the other side of the component and back all the beads again. seeds. Use a needle to double-knot the thread, somewhere between the beads, and sew through a few more beads before cutting the thread. At this point, you can also remove the stopper and trim the tail thread.
To hide the loops of wire and thread, glue a flat glitter back to the top of each loop. Gemstone glue is strong enough to stick these on and keep them in place! Let it dry for about 10 minutes and then your exquisite beaded ring is ready to wear!
We hope you enjoyed this free jewelry making tutorial. You may want to check out our other Instructions are here. Please take a moment to share this post with your followers!
Read more: how to make acrylic look like oil
Last, Wallx.net sent you details about the topic “How To Make A Seed Bead Ring Tutorial❤️️”.Hope with useful information that the article “How To Make A Seed Bead Ring Tutorial” It will help readers to be more interested in “How To Make A Seed Bead Ring Tutorial [ ❤️️❤️️ ]”.
Posts “How To Make A Seed Bead Ring Tutorial” posted by on 2021-10-23 00:15:08. Thank you for reading the article at wallx.net
