How To Make A Multi Strand Bracelet
We have another fun jewelry making tutorial for you today with this awesome multi-strand bracelet project! String is a versatile material to use for necklaces and bracelets – it’s great for threading beads with larger holes and because it’s soft and flexible it’s very comfortable to wear. how to make a multi-strand bracelet
- From 30 to 40 inches of black wire.
- Silver tube beads (we used 25mm).
- Silver plated round beads (we used 6mm).
- Silver plated chain, clasp and jumper.
- Silver flat ribbon ends (13mm) – you can use a round end if you prefer.
- Optional – silver plated heart charm.
- Jewelry glue.
- Flat nose pliers, round nose pliers and wire cutters.
If you want to add charms to your wire bracelets, prep them now by attaching a wire loop to the tip of the charm. We used a silver plated heart charm for this project.
Measure most of your wrist, leaving a gap of about 2 inches as this is where the chain and clasp will fit later. Cut 6 pieces of string to the correct size – you’ll probably aim for somewhere between 4 and 6 inches per length depending on your wrist size. Read more: How to make shroom tea Once you have your 6 pieces of string ready, place some jewels or gem glue inside one of the ends of the ribbon and then thread all your ropes in inside. Clip the end of the ribbon down until it lies flat and secure on the ends. This bit can be confusing!
Once you’re sure that the glue is dry and your wire ends aren’t coming loose, you can string your beads on. We used a range of tube beads, beads and charms for this bracelet as shown in the image. However, you can use any nuts you like – provided the hole inside is large enough to thread through. wire and beads at this point!
Once you’ve arranged the beads the way you want, you can then secure the other ends of the rope using another end of the ribbon. Use the glue in the same way as in step 2 to make sure that your wire won’t come loose. Make sure again that your ropes are all about the same size as some of them may slip a bit. You will need the ends to be the same length so that they fit snugly on the end of the ribbon. Read more: how long does it take to beat a stone heart | Top Q&A
After letting the second end of the ribbon dry for about 10 minutes, you can begin the next stage of this project – attaching the chain! To do this, first attach a jump ring to both ends of the ribbon.
Measure enough string to join the ribbon ends, note your wrist measurement. afterward attach a hook between. The easiest way to do this is to attach a long piece of wire to connect the ends of the ribbon together and then use the half point as a place to add the clasp. Trim excess chains with wire cutters. You can add an extended leash at this point and another charm if you want more decoration.
Read more: how to delete messages on ps4 | Top Q&A
Last, Wallx.net sent you details about the topic “How To Make A Multi Strand Bracelet❤️️”.Hope with useful information that the article “How To Make A Multi Strand Bracelet” It will help readers to be more interested in “How To Make A Multi Strand Bracelet [ ❤️️❤️️ ]”.
Posts “How To Make A Multi Strand Bracelet” posted by on 2021-10-25 08:47:08. Thank you for reading the article at wallx.net
