How To Make A Mermaid Skirt Without Sewing
Mermaid dress or mermaid skirt as it is sometimes called is a very beautiful figure, suitable for most body shapes. Slim fit and flared close to the knee to the bottom is beautiful – who doesn’t want to be a mermaid Read: How to sew a mermaid dress without sewing The flair of this dress is shown in the pieces Sew padding to the bottom of the skirt.Step 1. Make a pattern and cut the skirt pieces
Mermaid dress sewing pattern
Cut the skirt pieces – back and front – according to the pattern
- Waist
- hips
- round knee
- skirt height. Add 1 or 1.5 inches to this – this is the total length you need for this dress for one piece (This is for the roll hem; if you want the regular hem, add another 1/2 inch. to take the throne)
- Length from waist to knee.
For the back of the Mermaid AB skirt = 1/4 hip circumference + 1/2″ CD = 1/4 hip circumference + 1.5″ FE = 1/4 knee circumference + 1.5 where the letter E is marked from waist to knee MeasureJ-H = 8″ HI = 2″ For the Mermaid front skirt model
AC = 1/4 waist + 1 1/4 ″ AB = 1 ″ This is for a slight dip in the front waist D-E = 1/4 hip + 1 1/4 ″ FG = 1/4 knee round + 1.5 ″ JK = 8 ″ KI = 2 ″ Step 2. Mark the incision for the jacket A pattern on the front and back marks a line from the center crease so that AB is 1/8 of the hip circumference. Mark the length of the line 18.5 inches from the bottom edge. Cut through the line
Step 3 Make the spacers You will need these 4 spacers to sew on the 4 incisions you have – 2 in the front and 2 in the back. Mark the pieces of burlap on the folded fabric as shown below and cut it out. You will have 4 triangles of fortune
Step 4. Sew the pads to the skirt You now have to sew these pieces into the cut/slit you made. Align the Godet pieces on the cutout and see if it fits. For me, I had to cut a little bit from the bottom
Hold it at the right edges together and sew the pieces into the slot
On the back of the seam allowance cut the piece and clip the seam allowance.
Step 5 Face the top edge of the front skirt Cut a piece of fabric that fits over the top edge of the front skirt to a height of at least 5 inches. This is to face the top edge of the front skirt piece. It’s a good idea to interface this section. I discovered this late because the face appeared to be wrinkled inside the skirt. If there’s interference there, it can give more structure to the skirt’s waistline. A seam in the interface will perform or at least interface itself.
Finish the bottom edge of this piece. Then, Hold it at the top of the front skirt right sides and sew the top edges together
Turn to the other side. Tie the allowed part of the seam and the right side together so that the backing easily rolls to the back. Step 5. Elastic band for the back skirt. Cut a piece of fabric 2.5 inches wide and 1 inch longer than the top edge of the back skirt.
Hold this piece on top of the last piece right sides together (On the reverse side, the piece should extend slightly). Sew the top edge together. Turn to the other side
Sew the top of the waistband with the top extension. Cut this into 1/2 inch
Step 6. Stretch tabs You must create tabs for elastic now. Sew two pieces of fabric into two tubes. The pieces should be 1 inch long and 2 1/4 inch wide.
Turn the tubes inside out
Cut a piece of elastic that is 3/4 inch wide and 1/2 inch long minus 2 inches long. Hold this on either side of the elastic you cut out, tuck the elastic inside and sew it in place
Use a pin to thread this taped elastic through the waistband. Sew both sides to secure the elastic to the waistband You can sew through the elastic for double security. You now have an elastic waistband that won’t pinch at the side seams due to the tab you made.
Step 7 Crochet tab Read more: how to load pubg faster Create another tab for crochet sewing. Fold a piece of fabric (interface for added strength) 2.5 inches wide and 1 inch long. Sew the side and one top edge as shown below
Turn to the other side and you will get a tab like the following
Keep this tab on the extension you have on the side skirt. Use two or three stitches to secure this
Yes, tab is ready.
Step 9. Sew one side seam of one side Now sew one of the side seams of the back and front skirt together (side seam without hook) The right side is ideally kept when sewing this side seam
Now bring the face down and Now sew the face up too. Looks neater this way
Step 10 Sew the other side and attach the zipper Now you have to sew the other side seam. Mark about 7 inches from the top edge on the side seam. Join the side seam so don’t sew this 7-inch gap. Here you have to attach the zipper
To attach the zipper. You can sew a regular zipper into the seam. But I chose to attach the invisible zipper here. Holds invisible zipper on one edge. You can attach invisible zipper with invisible zipper foot faster. The grooves will allow the zippers to pass through easily as you sew close to the teeth of the zipper. Sew the zipper to the two side edges.
Once you’ve done this, flip the edge over to the back of the skirt and hand or machine stitch in place.
Sew the top of the zipper into place. Use regular zipper pins for this, so that you can stitch tightly against the zipper teeth.
Step 11 Sew the crochet sleeve and eye. Attach the crochet hook to the loop you created and sew the crochet to the waistband. Step 12 Cut the bottom hem of the skirt. Use sewing scissors to complete the edge of the roll.
You can wear it with petticoats like the skirt here for more volume or a regular sari petticoat. Read more: how to take screenshots samsung galaxy s6 edge
Last, Wallx.net sent you details about the topic “How To Make A Mermaid Skirt Without Sewing❤️️”.Hope with useful information that the article “How To Make A Mermaid Skirt Without Sewing” It will help readers to be more interested in “How To Make A Mermaid Skirt Without Sewing [ ❤️️❤️️ ]”.
Posts “How To Make A Mermaid Skirt Without Sewing” posted by on 2021-10-25 20:59:15. Thank you for reading the article at wallx.net
