How To Make A Hoodie From Scratch

This hoodie tutorial comes with my Styling Tutorial. So, if you want to learn how to compose templates, you can find Tutorials here. Besides hoodies, this guide also explains sweater and t-shirt patterns. Since the Tutorial doesn’t have sewing instructions, I thought it would be nice to publish the seams here on my blog instead.

Material

Hoodies are usually made from fleece or French cotton, but you can also opt for doubles, such as Ponte Roma or scuba. The simple hoodies you see here are made from pretty heavyweight fleece from Lafab Tessuti and for the zipped hoodie I opted for a lighter French tunic. Minerva handicrafts. I washed both fabrics before using. If you can’t find those anywhere, get tubular ribbed knits and make them yourself. It’s also possible to use the same fabric you’re making the hoodie from, but that fabric usually doesn’t stretch enough, so the cuffs in particular will be tricky, as you’ll see later. If you want, choose a grommet size so it’s not too small for the wire to get through. The ones I’ve used are 6mm (1/4in.) in diameter and I’d say that’s the bare minimum. You will also need small pieces of heavy fusible interface to back the fabric behind the helmets. In case you don’t have a heavy interface, piece together several lighter weight pieces that intersect. . The second option is the easiest of the two. For a nicer drawstring you can also get cord ends. I cannot find them anywhere. Staytape will also be used. And for a zippered hoodie, you’ll obviously need an open end zipper.

The Simple Hoodie

Starting from the hoodie is easier. Not having to worry about zippers or pockets, I mostly use a mini skirt to make my hoodie because the fabric is already stretched out. Another alternative method is a zig-zag seam or some other type of stretch seam on the sewing machine.

Prepare Hood

First step, hood. This version only has one layer of fabric because the material is too heavy to make it double. Therefore, there is an allowance of 4cm (1 5/8in.) in the roof opening to create a sheath for the cord. I recommend starting with the caps. That way, if you mess it up, you don’t need to deselect any seams. Feel free to place the eyelets higher than the rim of the hood if you like. Depending on the material you are using, be careful not to burn the fabric. For example, fleece can melt at high temperatures, then create holes for the grommet. I used this leather hole puncher and then cut the little clips around the hole with scissors. The hammer you see in the picture is actually a jeweler’s tool, but it’s pretty handy! Other tools come with grommets. They are usually easy to attach. first. First the two pieces put together and then 2. wire sheath. You can blanch the shell before sewing to make it easier. I doubled my 4cm (1 5/8in.) bezel allowance to get a 2cm (3/4in.) case. Naturally, you can’t stitch this part with a sewing machine, so use a zig-zag stitch instead. Read more: how to keep pets warm without electricity.3. The grommets must end in the middle of the width of the case.

Hoodie Bodice

To attach the hood, you need to sew the shoulder seams of the bodice. I recommend keeping the seam intact: sew a strip of fabric on the left side of the back shoulder line before sewing the shoulder seams. – change face. If you are using a sewing machine, you should first sew the hood into place with the sewing machine, and then sew it back with the sewing machine.first). Then sew the bodice side seams and sleeve seams in one go (2).

Sleeves and Straps

Now the hoodie is almost done. It just lacks the cuffs and lacing. Fold them in half to leave a seam allowed inside, then divide each section into 4 equal parts, placing 4 pins as a guide. Do the same division for the hoodie hem and the sleeve hem. This will help you distribute the volume evenly, fixing the hem band and cuffs in place for the branding. Notice how much larger the hem of the sleeve is compared to the cuff! You can sew the sleeve hem directly with a sewing machine, but attach the cuffs with a sewing machine first, stretching the cuffs as you do.

End of touches

Thread the string through the sheath and knot the ends, if desired, cover the neckline with criss-cross tape. This is probably the hardest part of the whole hoodie, so if you don’t mind seeing the seam, you can skip this part. Cross band does not stretch; Check that you can still turn your head through the neck opening.first. Pin one side of the diagonal tape as close to the original seam as possible and sew close to the edge.2. Fold the diagonal tape over the seam and glue.3. Sew the remaining edge. You may find it easier to use the zipper foot.

Simple hoodie, results

Finally, what does the hoodie look like? Personally, I like the big hoods, but observing the RTW hoodies, the hoods are usually smaller. However, this can easily be changed.

Zipper Hoodie

The second hoodie in the Styling Guide has extra seams so you can do color blocking or use different materials. In this case, I used the same fabric, French duffel, of course with pockets, sides and zippers. The hood has two layers, and I also wanted to try using the fabric of the hoodie for the cuffs and hem. Now I will show you the parts that are different from the previous example. Btw, for the zipper hoodie you can make the neck opening smaller, as it doesn’t need to be big enough to go over the head anymore! But in this case you also need to change the hood pattern.

Prepare the parts of the robe

Since all the pieces have been split in half, you need to sew them together first. Here you can also see the cuffs. I made them as small as possible. You can check by stretching the strip of fabric next to the sleeve pattern and see its length. This time, the hood has two layers. Only the top layer needs grommets. Note that this time there is only a small line allowed in the roof opening. Read more: How to add cream cheese to soup without freezing Start by first. sew both layers separately and then 2. fasten them together along the roof opening, right sides together. Press flat. 3. Create a wire sheath by stitching 2cm (3/4in.) from the edge.

Handbag

In this example, the bag is made of two layers so that there aren’t any excess seams showing on the inside. But this creates a lot of bulk, so it’s probably better to just do one layer. Whether you choose one or two classes, first first. retain the pocket opening and the two seams so they don’t stretch. afterward 2. either sew two layers together or finish the contour of the pocket opening.3. Place the pockets on the front of the hoodie, matching the notches. 4. Sewing in place. For a single-layer bag, fold the bottom edge before stitching, you can also sew the other two edges to keep it in place.

Zipper

This time you need to attach the sleeves in front of the hood. That way, you can close the side seams of the hoodie and attach the hem band. At this point, you can even attach the cuffs. As you can see here, they’re still quite large and the sleeve hemlines are almost lumped in. You can try narrowing the hem of the sleeve before buttoning the sleeves if you have trouble stretching the cuffs. In any case, I prefer knitting.first). The whole face.2. Start by sewing one side of the zipper. Notice that the zipper starts where the hem strip will be folded.3. Then pin the other side so all the seams and mouth of the bag match when the zipper is closed. You can do the basics before you sew.

The Hood and the Face

Now you can finally attach the hood. Here you can see where the hood should start: right next to the zipper. However, do not force the allowable portion of the zipper seam into the seam of the hood if you are facing in.Started by first. Attach it to the hem strip of the hoodie as shown in the picture. Then fold the whole thing over and pin along the c-line and neckline (2-3) .New and flipped to the wrong side. Now you can finish the banding by attaching the inner edge. Leave all seam allowances inside the hem strip. Coat it first then stitch, stitch first around the neckline – and if your sewing machine can handle bulk – also around the zipper. Finally, attach the front at the shoulder seams and a few other places, if needed.

Zipper Hoodie Ready

This is the final look. This fabric is a bit too light in my opinion. It also spans four dimensions, very difficult! Between the two examples, I definitely prefer the fleece sweater. Read more: How to read the expiration date of white claw

Last, Wallx.net sent you details about the topic “How To Make A Hoodie From Scratch❤️️”.Hope with useful information that the article “How To Make A Hoodie From Scratch” It will help readers to be more interested in “How To Make A Hoodie From Scratch [ ❤️️❤️️ ]”.

Posts “How To Make A Hoodie From Scratch” posted by on 2021-11-03 02:05:18. Thank you for reading the article at wallx.net