How To Make A Hole In A Leather Belt

Get out of your leather punch hole, because sooner or later, you’ll have to. Maybe it’s because you’ve lost a bit of weight, and now it’s time for you to pass another one, and you’re holed up. Maybe it’s because different pants lie on your body in different places. Or maybe you’ve simply worn that belt for a while and the skin has loosened up a bit. But, at some point, you will have to make a hole in the belt. And if you do it right, it can look completely in line with the others, like it’s been there all this time.Read: how to make holes in leather beltsRegardless of which technique you choose below, 90% of your success will not be determined by how the hole gets there, but by where you put it in the first place. In most men’s belts, the holes are spaced a perfect inch apart, making your job easy. Simply use the ruler to establish a straight horizontal edge by making sure it crosses each hole at the same point and marks on the back.Or, if you’re insanely obsessed (I am), you can make a small template out of some artist’s tape. Just use the existing holes to mark where they are, then move the whole thing down one by one. Hold it in a well-lit location to make sure your dots are centered. Read more: how to replace the pressure cooker valve

Option #1: Make a hole with a tarp (or nail)

If you have at least one medium equipped toolbox, you will definitely have a hammer or mallet. And you can have an awl, which is (basically) a metal point with a handle. It is similar to an ice pick, which you can easily use. If you don’t have an awl, get one! They cost $2.00 and you’ll find them used in all sorts of furniture, paper, leather, and fabric. Or, try a large nail.Not much for that: Mark your spot and place your belt on a piece of scrap wood. Use short firm strokes to slowly insert the pointed tip into the material, pushing it all the way through until you’ve reached a thickness of metal that corresponds to your hole size. That’s another argument for the nail awl, since the tool is tapered evenly along its length.

Option #2: Use an electric drill to add holes

If you take your time and start the hole well, you can drill through the skin with pretty obvious results. your drill bits until you choose the right drill bit. You will have the best results if you can start the hole clean. If you have brad point bits, you’ll definitely want to choose them over metal mining bits. If not, make a substantial dimple where you want it with a nail or sharp knife and use it to keep it in place.

Option #3: Use Leather Perforations

This specified tool is by far the most ideal choice. You can find them easily and they are great to have them around. This is the one I use. This rotary hole puncher (sometimes called leather puncher) has wheels of various sizes for punching round holes in fairly thick materials. The tension spring makes it easy to punch by hand. Seriously for the price of a good lunch… this is a good investment to have around. If your belt has ovals or oblong holes, I guess you can use this tool to create two rounded corners and then cut off the middle with a craft knife. But even I am not so obsessed. A good round hole of space will do you well.Recommended ManMade: CS Osborne 223 Rotate Leather Hole HoleIf you liked this post, please consider sharing it on Pinterest. Here’s a helpful image just for that (thanks!):Read more: how to braid with crochet

Last, Wallx.net sent you details about the topic “How To Make A Hole In A Leather Belt❤️️”.Hope with useful information that the article “How To Make A Hole In A Leather Belt” It will help readers to be more interested in “How To Make A Hole In A Leather Belt [ ❤️️❤️️ ]”.