How To Make A Guitar Amp From A Speaker

We get it: these are uncertain times and so you want to save as much money as possible. And this is probably why you want to learn how to make a guitar amplifier from speakers. We’ll show you here that you don’t need to spend on expensive amplifiers when all you need for a simple hangout with friends can be done with a pair of computers. speaker amps. Get your hands on it now!

How to make a guitar amp from speakers

Contents

Step 1: Prepare the tool

Creating your own amplifier for computer speakers should start with the following tools:

Step 2: Test your speakers

If you’re aiming for some honeytone amp mod effects in your guitar amp, I’d recommend picking up some speakers with around 1 amp output. If possible, choose speakers from major or top brands.

Step 3: Get the speakerphone

Read more: how to get bonds in the battlefield 1 | Top Q&AT To do this, you must remove the enclosure so the cover can be removed. Be as gentle as possible when doing this to avoid cutting the wire inside. Hold the screws firmly to the side, making sure that you don’t accidentally throw them aside. Next, unscrew the speaker to reveal its circuit board before removing everything else you find in the speaker.

Step 4: Check the circuit board

To do this, you must first locate the source, jack (audio input) and volume potentiometer. Refer to the video tutorial above. Once you’ve completed this section, you can now proceed to wiring the electrical system of your guitar amplifier speakers.

Step 5: Power the speaker

This section asks you to check how many volts the speaker needs to power on. Then find the leads to connect to this power source, cut them, solder their ends to the circuit board and 9V battery holder. Don’t forget to connect the negative and positive wires of the amp correctly.

Step 6: Jacking It Up

To do the jacking, first make sure you have the amp turned on, then plug one end of the 3.5mm audio cable you prepared into your music player. Then try it out by playing a song Read More: how to make a timeout channel you can take the female socket connector in the stereo jack and plug the other end of the audio cable into it. Next, you need to touch or connect the wires that used to be paired to the input jack and pair it with the Female Socket Connector of the stereo jack. When you don’t hear any sound, try another combination until you start to hear music coming from the speakers.

Step 7: Solder and finish everything

The next step is to solder the wires to the 1/4″ jack connector you prepared. This last part can be a bit complicated but not difficult.

Step 8: Watch Video Overview

Yes, you heard right. Building a PC speaker amplifier can be a bit technical, but not so technical that you can’t do it yourself. You just need to watch this video as an overview. .

Inference

That’s it: now you’ve learned how to make a guitar amplifier from a single speaker. Share this with your friends so they will also save money by making their own! Read more: how to remove stickers on facebook