How To Make A Cheek Riser

You can make this simple, yet effective and comfortable comb lift pad in about 15 minutes for less than $15. Photo by David Maccar This is a problem many gamers have — they get a new rifle that seems ideal in every way, but once you put the scope in it isn’t ideal. The mag is a bit on the top, and the comb on my layered collar isn’t high enough for me to see the diagonal chairs without lifting my head a little, almost removing my cheeks from the stock. In May, the venerable David E. Petzal wrote this post about the do-it-yourself comb lifter in the movie “American Sniper,” a version of which he said he would depend on much I reread the post. Been there recently and started scouring the internet looking for some material options, because like Petzal, I’m tired of combs with straps that slip out of place and add a significant amount of into the rifle store. I think I’ll try to do it myself. A piece of closed cell foam conduit glued to a comb of a stock, as seen here on Bradley Cooper’s rifle, will provide the support your head needs when shooting sideways. safely attach an old pad made by a company that won’t have a name and throw it over the garage, I checked Amazon to see how much it would cost using the source listing offers that I found here on topqa.info, which has some great step-by-step instructions. The key material is foam from a sleeping pad or yoga mat. It’s what’s used for Bradley Cooper’s rifle, and what many military snipers use, simply because it’s readily available and it works perfectly. When glued down, it compresses to the right density for a rifle cheek pad, not too soft but not too hard either. It might seem a bit wasteful to buy a sleeping pad just to cut one end of it, but you only have to cut out one strip. That leaves the rest of the pad to be used as a capture mat. If you have an old, perforated pad, you can use it and save yourself $5.37, which is the cost of a new pad on Amazon. The other item you’ll need is some Vetrap. This is a 3M tape material made specifically for animals, has considerable stretch and only sticks to itself, so it won’t stick to the animal’s hair. This also means there’s no dirty adhesive to stick to your rifle inventory. woodstock — or more importantly, if you’re borrowing a rifle that doesn’t fit you, going with the Vetrap is a great option for a cheap, temporary fix that will last if you need it. As a bonus, Vetrap resists moisture.I added an industrial-strength self-adhesive Velcro so I could attach a case holder to the scope. One roll is enough for my rifle. Plus, it comes in a variety of colors and widths. Here is what I have. Note that it’s not a Vetrap brand and the threads that run through this tape, which give it strength, are white, making the black wrap appear grayer or grainy when it’s all stretched out like you can see in the photo. It also works well, but if aesthetics are paramount to you, be warned. Here’s how:

Start by cutting some foam pads as big as you want your pads to be. Some shooters prefer a narrow stack of pads right on top of the stock, others prefer to wrap larger pieces of foam over the entire comb. Up to you. You will find that when you wrap the foam with tape, you will be able to shape it slightly by tightening or loosening the wrap a little.
Get some scotch tape and stick the foam pad to the neck of your gun and wear the rifle from a variety of positions, making sure it’s comfortable and tall enough and that there’s no scope ball in your line of sight. I had to stack two pieces of foam to get the right height.

IMPORTANCE: While you’re doing this, if you have a bolt-on rifle or MSR, make sure there’s enough clearance for your charging pin or handle to complete its full range of motion with the pad in place. . If you regularly remove the bolt on your rifle, take this into account. If you can’t move the pad any further, you can cut a half circle from the front of the pad to make space.

I still have scotch tape to keep the pads in place when I start wrapping them with vet tape from one end. I removed the scotch tape when I had enough vet tape to keep everything in place. When you do this, you will notice that the texture of the sleeping pad will adhere to the neck and other pads very well after being stretched.
When you get to the end, make sure the foam is completely covered with Vetrap before finishing it on the bottom side of the stock.
Read more: how to factory reset lg stylo 5 without password I added a piece of self-adhesive Velcro to the outside of the wrapper so I can bang on a case carrier I’ve laid around if I want .

As Kyle Eggimann on topqa.info pointed out (thanks for the great execution, Kyle), some people may find the texture of the stretched Vet tape a bit rough. Let your face rest for a long time. He recommends adding a self-adhesive mole skin to the top of the pad to give your cheeks a soft surface. I might end up doing this, simply because, as he says, this will keep the oily and sweaty facial skin from sticking to the vet bandage, so it lasts longer. for your rifle or pistol inventory can be aesthetic, if you wrap it very neatly (I don’t have nearly enough OCD to make it look as good as it could be) it won’t ruin your rifle stock, for whether it is wood or synthetic. And you can certainly do it for cheap.Total cost:That’s a Big Total: $13.33 and about 15 minutes of effort, or just $10.36 without Velcro. And if you have to make another, you can simply buy another roll of veterinary tape and cut another piece of foam (if needed). and the color you choose. I still have to see how it withstands extended use, but after a trip to the range, it performs well and is even strong enough to hold my shell carrier. Read more: How to Create Easy Rangoli Patterns | Top Q&A