How To Make A Box Hockey Game

Box hockey is a classic that we feel deserves a much-needed revival. It’s easy to learn, fun for all ages, and can be a great workout.There is a downside that I can get your kids addicted but it’s better to let them join an outdoor game then play the indoor video game. Place the “puck” on the center board, each player touches the bottom of the box and then touches each other three times, count 1-2-3 and go! After the third tap, your goal is to smash/poke the ball through holes drilled in the wood to score. You can play best of the first three to 11. If the ball goes off the board then restart. The only other rule is to keep your stick lying down! Like the corn hole, this game can be built using easy-to-find materials from your scraps, and in less than an hour you’ve got a boxy hockey rink that’s sure to provides hours of continuous competitive fun.

Tools and Materials

The only tools you need are a cordless drill/driver and a jigsaw. Materials are almost as simple as one piece of 5/8” plywood cut into 6′ x 2 ½’ pieces, two pieces 72 inches long 2×4, and three pieces 27″ 2×4. You’ll also need a few wooden brooms to make a hockey stick, and a scrap of wood will work just as well as a puck.

Step 1 – Cut the wood

Read more: how to mute players in warzone ps4 Match all your pieces and cut plywood and 2x4s into the needed topqa.infon by cutting notches in the plywood. You’ll want one notch for each end for the target and three for the centerThe notches for each target and the pass through the holes should be 3″ wide and 2 ½ high”. The center groove at the top of the center board and used to place the ball facing should be 3″ wide and 1″ deep. The passage should be 6 inches from each end of the center panel. The top notch should be centered on the opposite side of the board.

Step 2 – Building the framework

After your notches are cut, you can start building the frame. Attach the ends and sides with 2” deck screws. Pre-drill holes for faster, straighter nailing.

Step 3 – Attach the plywood

Once your frame is set up, lay it on the ground with the end notches facing up. Then lay your plywood evenly all over the top and make sure all the corners are square. Attach each corner and screw 12 inches at a time for maximum durability. Place your center 2×4 with the two openings in the center of the box and screw two screws at each end and up through the bottom.

Step 4 – Release the Puck

Use a scrap of wood cut into 2”x1” as a puck and grab two broom handles and you are ready to play. however you want it but be aware that a hockey puck gets a lot of abuse so any paint job will end up getting scratched which we think will give your board more personality. Enjoy this classic game that will entertain everyone for years. how to meet a girl if you are shy

Last, Wallx.net sent you details about the topic “How To Make A Box Hockey Game❤️️”.Hope with useful information that the article “How To Make A Box Hockey Game” It will help readers to be more interested in “How To Make A Box Hockey Game [ ❤️️❤️️ ]”.

Posts “How To Make A Box Hockey Game” posted by on 2021-10-25 01:05:04. Thank you for reading the article at wallx.net