How To Install Windows Me On Virtualbox
In this article, we will examine how to install Windows Millennium Edition (Me) on a new virtual machine using Oracle VM VirtualBox on the Windows 10 64 Bit operating system.Reading: how to install windows me on virtualbox
How to Install Windows Me (Millennium) on Windows 10 using Oracle VM VirtualBox
Contents
Microsoft released the Windows Me (Millennium) operating system with both 16 Bit and 32 Bit versions for users on September 14, 2000.Windows Me has the same code structure as Windows 98 and is the last version of the 9x systems. In order to run this system on a physical PC, the minimum requirement is a 150 MHz Pentium processor, 320 MB of free disk space, and 32 MB of RAM.Physically supporting a maximum of 1.5 GB RAM, Windows Me can be expanded to more capacity by editing some configuration files.Windows Me includes Internet Explorer 5.5, Windows Media Player, and Windows Movie Maker, as it is mostly developed for home users.This system, which received the title of Microsoft’s most unsuccessful operating system, was replaced with Windows XP in a very short time due to system instability and crash problems.Main support for the Windows Millennium Edition (Me) system officially ended on December 31, 2003, and extended support on July 11, 2006.Nowadays, it may not make much sense to install Microsoft’s legacy Me system on a physical computer, but in some cases, it may be necessary because the updating software of older devices supports older systems.Hardware drivers can be difficult to find and install, even when installed on an old computer. Therefore, it may be easier to install older Windows operating systems on virtual machines.
How to Create a New Virtual Machine for Windows Me
You can install all old and new Windows, Linux, and macOS systems on virtual machines using Oracle VM VirtualBox on your host computer that supports virtualization.Creating a new virtual computer for Windows Millennium is simple, but you need to configure its settings correctly. Otherwise, you may get a lot of errors during the operating system setup. Step 1After installing VirtualBox, run the program and click Machine / New from the tool menu or click the New button on the right side shortcuts and start the virtual machine setup wizard.
Read more: How to power a sump pump without electricity Step 2As soon as you type the name of the operating system you will install in the Name section of the Virtual PC wizard, the values in the Type and Version sections will be automatically determined by VirtualBox.If you do not want to install on your host disk, configure the Machine Folder section to a location on your external disk.
Step 3The recommended memory size for the Windows Me VM is 128 MB, but specify the RAM value as 1024 MB (1 GB) and click Next.
Step 4Since you will be installing a clean Windows system, check Create a Virtual Hard Disk Now in the Hard Disk configuration window and click Next.
Step 5Select VirtualBox’s recommended VDI (VirtualBox Disk Image) as the Virtual Hard Disk type and continue.
Step 6If you are installing on an old host computer, you can configure the virtual disk size to the Fixed Size for virtual machine performance. Thus, the entire capacity of the virtual HDD will be separated from the host disk.If your host computer has a fast SSD or M2 disk, it is recommended to set up with the Dynamically Allocated option. In this case, the disk space needed by the VM will be allocated automatically from the host disk.
Step 7In the File Location and Size window, the location where you will install the virtual machine is shown where the virtual disk file will be backed up. If you want to store both in a different location, you can change the disk file location in this window.You can also change the virtual disk capacity automatically set by VirtualBox.
Step 8After preparing your virtual PC, open its settings to add the ISO file of the operating system or to configure the Boot settings.
Step 9In the System / Motherboard tab, select the Optical device in the first row of the Boot Order setting and enable the I/O APIC feature.
Step 10Set the virtual processor number of the virtual PC to 4. If you do not enable I/O APIC, you will not be able to configure the virtual processor number.
Step 11In the Acceleration tab, check that the virtualization interface is enabled and continue.
Step 12Enable the 3D Acceleration feature for the Display device and also set the Video Memory value to 128.If you cannot install Guest Additions for 9x versions in VirtualBox as they are not officially supported, it is useful to increase the video memory as we will install the driver for the display adapter.
Step 13Remove the Floppy controller from the Storage devices.
Step 14Check that the Host I/O Cache feature of the IDE controller is enabled.
Step 15Configure the topqa.info disk file as SSD (Solid State Drive).
Step 16To add the Windows Me (Millennium) ISO file to your virtual PC, select the optical drive and then click Choose a disk file.
Step 17Select the Windows Me ISO file you have or downloaded from the table below the article and click the Open button.
Step 18After adding the ISO file to the VM, click the Start button.
Step 19After running the VM, when the Start-Up Disk window opens, select the ISO file and click the Start button again.
How to Install Windows Me (Millennium Edition)
After running the Windows Millennium virtual machine, you can proceed as if you were installing it on a physical computer by following the steps below. Step 1You can boot from both the Hard Disk and the CD-ROM in the Microsoft Windows ME CD-ROM Startup Menu screen. Press Enter on the Boot from the CD-ROM option since you will install the system on the virtual PC.
Read more: How to power a sump pump without electricity Step 2Since you added the ISO file to the optical drive, press Enter on the Start Windows Setup from the CD-ROM option.
Step 3When the Microsoft Windows Me Setup wizard opens, press Enter to start the installation. You can press F1 to get more information about setup or F3 to exit setup.
Step 4Press Enter on the Configure unallocated disk space to edit unallocated disk space.
Step 5If you have a disk capacity of more than 512MB, you need to enable large disk space usage. Click the down arrow to select Yes, enable large disk support, and press Enter.
Step 6When the setup wizard restarts your virtual machine, boot your system from the CD-ROM again.
Step 7When your guest machine restarts, this time the setup wizard will format your virtual disk.
Step 8After the virtual disk is formatted, the setup wizard will check your system, so press Enter and continue.
Step 9When Microsoft ScanDisk is opened, media, file, and directory structures will be checked on the C drive and disk space will be checked.
Step 10When your virtual machine restarts, Setup will prepare the Windows setup wizard.
Step 11The Windows Millennium Edition setup wizard reports that the installation will be completed in 30 to 60 minutes. Continue by clicking Next to start the installation process.
Step 12Installing Windows in a location other than the default directory can cause system problems. Therefore, select C:WINDOWS as the installation directory and click Next.
Step 13Wait while the setup wizard is preparing the Windows directory and checking the disk space.
Step 14At this step, you need to select your preferred setup type, but it is recommended to continue with the Typical selected by default.
Step 15In the Windows Components window, select to install the most commonly used components and continue.
Step 16To identify your computer on a network, type a different computer name than your existing computers and click Next.
Step 17In the Country/Region window, select the country you live in and click Next.
Step 18Configure the time zone of your virtual system according to the country you live in and click Next.
Step 19If there is a setting you want to change, you can click the Back button to go back to the relevant settings and make changes. When the installation wizard is ready to copy the Windows files, click Finish and continue.
Step 20Your virtual system will automatically reboot in 15 seconds.
Step 21Windows will identify plug-and-play devices on your guest machine. If the hardware scan is taking longer than usual at this stage, restart your virtual machine and try again.
Step 22Type a user account name for your Windows Millennium system and click Next.
Step 23Accept the license agreement of the Windows Me operating system and click Next.
Step 24Type your Windows Me product key and continue.
Step 25After typing the product key of your virtual system, click Finish to start Windows Me.
Step 26When your guest machine restarts, wait while your configuration files are being updated.
Step 27When your virtual machine restarts, system settings such as control panel, shortcuts in the start menu, Windows help will be updated.Read more: how to downgrade ios 9 to ios 7
Step 28After configuring the system settings, type your username and click OK to continue.
Step 29Wait while your system settings are updated for the last time.
Step 30After installing Windows Me with VirtualBox, the desktop view will be as shown below. You can also check the system information by right-clicking on My Computer and clicking Properties.
How to Change the Screen Resolution
Oracle VM VirtualBox virtualization program does not support Guest Additions for 9x versions of Windows. Therefore, you may not get the full efficiency of virtual machines, but you can change the screen resolution and color mode by using a 3rd party software. Step 1First, click My Computer / System Properties, open Device Manager, and check the drivers that are not installed. If Guest Additions could be installed, drivers for all devices in the device manager would be installed automatically.To change the screen resolution in Windows 95, 98, and Me, you can use the SciTech Display Doctor software or simply install the Display Adapter driver.Download the video adapter driver from the table below the article to your host computer and right-click on the CD/DVD icon to add the ISO extension file to the guest machine, and then click Choose a disk file.
Read more: How to power a sump pump without electricity Step 2Select the Windows Me Display Driver (VBE Miniport) ISO file and click the Open button.
Step 3Double click on Standard PCI Graphics Adapter on the Device Manager, then click the Update Driver button.
Step 4To install the relevant driver from the content of the ISO file you added to the optical drive, click Next while the automatic load driver option is selected.
Step 5When the driver options are listed, select 032MBtopqa.info and click OK.
Step 6After installing the driver for the graphics adapter of the monitor device, restart your virtual computer.
Step 7Open Display Properties and select True Color (32 Bit) from the options under Colors and apply the changes without restarting your virtual PC.
How to Install USB 2.0 Driver
Under normal circumstances, installing the USB 2.0 driver on the Windows Me/Millennium virtual PC is a very troublesome task. All the drivers you download from the internet are both incompatible and problematic. Therefore, you can download the USB 2.0 driver that we have prepared for you, which works smoothly, from the table below to your computer.NOTE: If you install the graphic device driver of the virtual machine with SciTech Display Doctor, the USB 2.0 driver will not work when you restart your VM. This is because the display driver is not fully compatible with WinMe. So, configure the graphics adapter with VBE Miniport. Step 1Open Device Manager again and check that USB 2.0 is not enabled under Universal Serial Bus Controllers. Then, to add the USB 2.0 Driver ISO file to the virtual machine, right-click on the CD/DVD icon and click Choose a disk file.
Read more: How to power a sump pump without electricity Step 2Select the Windows Me USB 2.0 Driver ISO file you downloaded from the table below the article and click the Open button.
Step 3Double click the PCI Universal Serial Bus on Device Manager and click the Reinstall Driver button. In the window that opens, check the Specify the location of the driver option and click Next again.
Step 4In the next window, check the Removable Media (Floppy, CD-ROM…) option and click Next. After scanning the USB 2.0 drivers from the ISO file you added, select Intel (R) 82801FB/FBM (ICH6 Family) USB2 Enhanced Host Controller – 265C and click Next again.
Step 5Click Next at topqa.info to install the USB 2.0 driver, and then click Finish to close the window.
Step 6Insert a USB 2.0/3.0 supported flash memory into the USB 2.0 port of your host computer and click Devices / USB / KINGSTON DataTraveler (Your USB Device Name) in the tool menu of your guest machine. Then, after clicking the Refresh button in the device manager in the virtual machine, your USB storage device inserted in your virtual PC will be determined and its drivers will be installed.
Step 7You can see your USB device under Storage Device in the device manager.
Step 8Also, when you open the My Computer window, you can see that the USB flash drive you inserted into your virtual machine has been defined.
How to Increase RAM Size
Officially stated Windows Me maximum RAM is 512 MB, but in physical computers, the maximum RAM is 1.5 GB.You can increase the RAM value of your WinMe system on a virtual machine by 2 GB by editing the topqa.info file. Step 1With your Windows Me guest machine running, open the topqa.info file in C:WINDOWS.
Read more: How to power a sump pump without electricity Step 2Add MaxPhysPage=7C6FF value under [386Enh] in topqa.info and save the file.
Step 3Turn off your virtual computer and change the Base Memory value to 2048 MB (2 GB) in the system settings.
Step 4Run your virtual computer and verify that the system memory is 2 GB from the system properties.
Video
Installing Older Versions
Download Windows Me ISO and Driver
♦ How to Install Windows XP on VirtualBox ♦ How to Install Windows 7 on VirtualBox ♦ How to Install Windows Vista on VirtualBox ♦ How to Install Windows 8.1 on VirtualBox ♦ How to Install Windows 10 on VirtualBoxRead more: how to repair a chip in marble
Last, Wallx.net sent you details about the topic “How To Install Windows Me On Virtualbox❤️️”.Hope with useful information that the article “How To Install Windows Me On Virtualbox” It will help readers to be more interested in “How To Install Windows Me On Virtualbox [ ❤️️❤️️ ]”.
Posts “How To Install Windows Me On Virtualbox” posted by on 2021-11-06 00:29:23. Thank you for reading the article at wallx.net
