How To Get Restoration Hardware Finish

Using Latex Paint To Get A Restoration Hardware Finish


Do you love the look of a Restoration Hardware Finish but not the price? This easy faux finish will give you the same look on any furniture piece at a fraction of the price!I don’t know about you but I don’t like surprises when it comes to furniture painting. If I am going to take the time to do a faux finish on a furniture piece, I want it to look fabulous!Reading: how to get restoration hardware finishMy Restoration Hardware faux finish will give your outdated wood or laminate furniture piece new life in a few simple steps. This tutorial will take out all this guess-work, giving you a beautiful finish with low-cost products. You can also control how light or dark you want your final finish so you can customize it to your taste!Every year right before Christmas, Jeremy and I take an overnight trip to Houston, which is about an hour and a half from College Station (And yes, we are proud Aggies!). We see Transiberian Orchestra, go out to eat, stay in a hotel and the next day we do a little shopping!This is my opportunity to see two of my favorite stores at my favorite time of the year! Restoration Hardware and Pottery Barn are right beside each other in the fancy part West Houston.Every year I go in and admire the elaborate Christmas displays but most of all I’m awed by their furniture and home decor. I always out an ornament to take home and put on our Christmas tree – because let’s be honest – an ornament is one of the only things most people can afford in both of those stores.It was several years ago on one of these trips that I saw what is now referred to as the elusive “Restoration Hardware Finish”. I marveled at it and vowed to one-day make my own Restoration Farmhouse faux finish for other DIYers like myself to paint on furniture to their heart’s content!Although my thought process was overly dramatic, fortunately, it wasn’t unrealistic as I’ve finally got the Restoration Hardware finish under my belt! It’s super easy and doesn’t require a chemical stripper or even fancy paints – just a little latex paint and clear glaze!One of the things I love about this process is that it can be used on any surface. In other words, you could start with a purple laminate entry table and end with a modern farmhouse finish even Joanna Gaines would be proud of!LET ME SHOW YOU:

  • A tried-and-tested method for getting a Restoration Farmhouse Finish on any painted or stained surface
  • The easy way to simulate planks on any flat surface – all with paint!
  • An inexpensive process that requires no fancy paint or chemical stripper.
  • Why this finish just might be better than the real thing
  • Some encouragement when you feel a little too overwhelmed by your to-do list in this week’s Renovate Your Faith devotional at the end of this post.

(As an Amazon affiliate I earn from qualifying purchases. Please see my full disclosure HERE).

My Absolute Favorite Glaze for Faux Finishes with Latex Paint

☑️ If you are curious or in a hurry, here is a quick link to the clear mixing glaze I use for all of my faux finishes for furniture. I’ve tried others and always come back to this one: Valspar Clear Mixing Glaze (Click here for the current price.)

Restoration Hardware Farm Table: To Buy Or DIY?

Restoration Hardware was one of the first to come up with beautiful rustic farmhouse finishes and Pottery Barn soon followed. While the Restoration Hardware furniture is absolutely stunning, they can run anywhere from $1,800 and up depending on the style and size of the table. The faux finish in this tutorial should cost you less than $50.Also, I noticed something interesting on Restoration Hardware’s salvaged wood table reviews. Several buyers noticed that the surface of the Restoration Hardware tables did not hold up nearly as well as they expected. Julie Blanner noted in her post entitled Restoration Hardware Table Nightmare that when using a damp rag, the finish literally wiped off.I don’t know about you, but if I pay that much for a Restoration Hardware dining table, I don’t want the finish to wipe off with a moist rag. Restoration Hardware’s wood maintenance guide online says to finish their tables with white wax for extra protection. Well…you know how I feel about wax on furniture and I give other options here: (A Better Alternative to Wax for Furniture). There’s even a Restoration Hardware touch up kit on their site.But my point is: why spend that much on a table whose finish will easily wipe off if you don’t seal it in?!? If you are going to have to do some refinishing on your table, why not do the entire stain yourself for about $50 and use a reliable clear coat that will withstand even the biggest of spills.If you decide you do want to buy a Restoration Hardware table, go to this post for the best options to protect it: The Best Clear Coats for Furniture (Tested & Reviewed)For those of you who have chosen the DIY route, I cannot wait to show you how great this finish looks on any surface! You can use it on an existing table or build your own farmhouse table with these simple plans: EASY Farmhouse Table with Turned Legs

How To Achieve A Restoration Hardware Finish: Which Faux Finish Is Best?

There are tons of Restoration Hardware dupes online and all have pros and cons. A few ways to get the Restoration Hardware look are with stain, chalk paint, or even vinegar. But not all faux finish techniques are created equal.

See Also  How To Charge Ps4 Controller Without Charger

What About Getting A Restoration Hardware Finish With Stain?

Some use stains to get the look of your favorite finish on furniture. The problem with stain is that it penetrates the surface of the wood. Because absorption rates will be different for the moisture level and type of wood, you don’t really know how much stain is going to absorb and therefore you don’t have a lot of control over the final product.If the furniture piece you are working with already has a stain then the new stain will go on top of it making it darker. So, using stain to achieve a Restoration Hardware finish isn’t a great option especially if your table already has a medium to dark stain. Also, combining stains can be tricky!

Can You Get A Restoration Hardware Finish with Chalk Paint?

Creating a Restoration Hardware finish with chalk paint is a step in the right direction but chalk paint can be pretty cost-prohibitive. Also, you don’t have the same color options, durability and flexibility as you do with latex paint: Why I Don’t Use Chalk Paint on Furniture

How To Create A Restoration Hardware Finish from Latex Paint

My favorite rustic staining techniques always involve latex paint. Why latex paint? For one thing, you have lots of flexibility with it and it’s extremely durable. This process does not build upon your table’s existing stain shade. You can start with a white painted piece of furniture and get the same Restoration Hardware FInish as if you applied this process to a furniture piece with a dark stain – it is that versatile!Latex paint comes in hundreds of shades so you can get exactly the color you are looking for! Unlike some rustic wood finishing techniques, this process is super affordable as it involves a few sample containers of latex paint and a container of Valspar Clear Mixing Glaze (Click here for the current price).To give you an overview of this process, we will apply a base coat and then a glaze/paint mixture that we will wipe on. Last, we will dry brush it in white. Don’t worry, I give you all the details below in my Restoration Hardware finish tutorial to ensure your table is just as beautiful as one you would see on a showroom floor!

What is a Restoration Hardware Style Finish?

There are several Restoration Hardware colors to choose from so it’s important to define terms. A “Restoration Hardware Finish” is similar to a natural wood finish but darker and still weathered. This medium stain is popular for modern farmhouse and rustic decor while still being sophisticated. On the other hand, it’s not as dark as a traditional wood stain (you can see my faux traditional stains here) and it never has knotholes. Also, you might see the hint of white-washing on the surface.

Restoration Hardware Finish: The Brown Version

Read more: how to change fusion core fallout 4The Restoration Hardware wood finishes tend to lean one of two ways. This DIY tutorial is for the browner version that looks like antiqued wood. I like to think of it as raw wood that has been exposed to air for decades which makes the look antiqued. Two examples of this type of finish are: Restoration Hardware Weathered Oak Finish and Restoration Hardware Salvaged Natural Stain These are my two favorite Restoration Hardware colors! With so many popular gray paint colors, it’s nice to be able to add a little warmth to a room with this finish.

Restoration Hardware Finish: The Gray Version

There are also greyer finishes such as Restoration Hardware Salvaged Grey Stain or Restoration Hardware Burnt Oak. This finish is often known as driftwood or sometimes a weathered wood look. To achieve a grayer finish, I recommend my Driftwood Finish Tutorial. It is one of my top posts and lots of readers have had great results with it!The browner version that looks like the Restoration Hardware Salvaged Natural Stain will be the finish I demonstrate in this post with no stripping, vinegar, or bleaching – just latex paint and a little clear glaze!

Supplies Needed: DIY Restoration Hardware Finish

Restoration Hardware Finish – DIY Tutorial

Below is the step-by-step tutorial for a Restoration Hardware finish on furniture. This tutorial will explain how to do this finish and also how to get the look of faux planks on any table. The video is supplemental to this tutorial and will show you exactly how to achieve this faux finish!

Step 1: How To Get A Restoration Hardware Finish – Prep Work

Stop! Before you do anything…take a before pic. When you are done, post the before and after pics on Instagram and tag me @renovatedfaith! I would LOVE to see how your project turned out!❤️If you have any knotholes or damage in your furniture piece, now is the time to fill them and then sand. You can see exactly how to do that in this post: How To Fix Damaged FurnitureWhether your table is made from raw wood (in the case of a newly built table like ours) OR if you are refinishing a previously stained or painted table, I suggest you use a primer like Zinner’s Cover stain (click here for the current price.) I learned it’s best even to use it on raw wood so that the wood won’t absorb your glaze mixture, making it hard to move the glaze around. I learned this the hard way on the wood shelf covers for my wire shelving and had to redo them!Once you have filled and the holes, prime the entire table using a brush or roller. I usually use a cheap brush (like the ones I mentioned above) or roller for oil-based primer and just throw it away when I’m done. This is the only oil-based product we will be using for this process.

See Also  How To Get Free 3g Internet On Android Tablet


If you are using this process for laminate or veneer. Be sure to use a higher grit sanding pad to really rough up the surface so the cover stain will adhere well. Otherwise, the process is the same!Once the primer dries, you want to sand it lightly. Don’t forget that you are just sanding lightly to smooth out the surface (How to Sand Furniture in Less Than 5 Minutes). Wipe the table down with a damp cloth to remove any sanding dust.These preparation steps are kind of boring but I promise they will make all the difference in how the end-product looks!

Renovated Faith: What’s in a Name?

Step 2: How to Paint a Restoration Hardware Finish on Furniture – Base Coat

Use one of your brushes to paint on the base coat of Sherwin Williams Hopsack. Be sure to paint in the direction of the grain. If you can’t tell how the grain is running or you are painting a laminate table, paint lengthwise in the direction of the longest length.Your base coat might not completely cover. In other words, you might see a little over the primer coming through but that’s ok. Just get it to cover as best you can in one coat.Let your base coat dry overnight.TIME-SAVING TIP – You can get your primer tinted to the same base color and skip the base coat of latex paint completely.

Step 3: How To Paint A Restoration Hardware Finish With Latex Paint and Glaze

Now to the fun part! Be sure to watch the video to give you a better visual of the technique.If you want to make a solid table look like it has faux planks, read the part below so you know how to add the yellow frog tape.First I’ll go into detail about the actual technique and then I’ll explain how to make faux planks.Be sure to watch the video before starting the process.

Paint/Glaze Technique for a Restoration Hardware Finish

Mix your Sherwin Williams Van Dyke Brown with your clear mixing glaze and water in this combination:

  • 1 Part Water
  • 2 Parts Valspar Clear Mixing Glaze
  • 2 Parts Sherwin Williams Van Dyke Brown.

Do one plank or section at a time. Paint the glaze mixture on the plank back and forth to just get it covered.Next, use a baby wipe to wipe back and forth in long strokes lightly. See the video for this part. The baby wipe should glide back and forth on the surface. At first, just wipe back and forth from top to bottom and when you get to the last pass-over with the same baby wipe, wipe left to right and top to bottom without picking up the baby wipe in the middle.You will see the look of wood grain start to emerge!Let this part dry 2 hours at least before pulling off the tape before going to the next section

How to Paint Faux Planks On A Tabletop

We built this farmhouse table and it already has planks but I wanted them to look more pronounced. After the base coat of paint, the table seemed to just have a solid top without planks so we are going to add them with paint! The beauty of this method is that you can add faux planks to ANY solid tabletop in any size and made out of any material.First, decide which way you want the planks to run. I suggest in the direction of the grain. Decide also if you want to simulate the look of breadboard ends like on my table. The easy way to figure out the width for the length-wise planks is to decide how many planks you want and then divide the width of the table by that number. My table has 5 long planks and a breadboard piece on each end.Once you decide how many planks you want, measure out the lines of each plank, and trace it with a pencil along a straight edge.Read more: how to use flocculant in poolWe are going to do the faux finish on a few non-adjacent planks at a time so you will tape the top so every other plank is exposed. For my table, I painted the breadboard ends first, then planks 1, 3,& 5 and planks 2 & 4 last.Here are planks 1,3 & 5 taped off.When you put the tape down on the side of the plank, place it just slightly outside the line because you want about 1/8 – 1/4″ inch of the line to be exposed and the paint to settle in those areas to be darker.Do this full step to one plank at a time.I taped and did this step on the breadboard ends first and let them dry a couple of hours before taking planks 1,3, & 5.Do this step on the non-adjacent planks.After a couple of hours carefully pull off the tape in this directionYou can see planks 1, 3 & 5 completed.Now tape planks 2 and 4 and repeat the process.Once each set of planks has been painted, let them dry a couple of hours and then pull up the tape (pull in the opposite direction). Then, tape the edges of the rest of the “un-stained” planks, again taping just outside the line to leave some of it exposed.While waiting on the different sections of the top to dry, you can do the glaze/paint step to the legs and aprons. I like to work on one part at a time so they paint doesn’t dry up on me.

Step 4: Dry Brush Your Table

Mix together 2 parts clear mixing glaze, 2 parts white paint, and 1 part water. Get a brush and a colored paper plate if you have one. Dip the edge of the brush in the paint mixture and then wipe off as much as you can on the colored plate. (The full step is shown in the video).Now, dry brush back and forth on the tabletop. If you get too much on the table, you can smudge it with your finger in the direction of the grain.Do this over the whole surface of the table at once (there is no taping of sections for this step).This step is great for determining how dark or light you want your finish to be. Dry brush more if you want a lighter finish.

See Also  How To Tell If Sausage Is Cooked

Step 5: How to Protect Your Restoration Hardware Finish with a Top Coat

I’ve done a lot of experimenting with clear coats and my absolute favorite is Varathane’s Water-Based Polyurethane in Matte (you can get it here!). Follow the directions on the back.I like to use a foam brush. Just brush in the direction of the grain. For additional coats, just stick the foam brush end in a baggie and stick it in the refrigerator to store it. Then, when you are done with your clear coat layers, just throw it away.

RENOVATE YOUR FAITH: Accepting God’s Help in the Midst of Overwhelm

For more spiritual encouragement, click here for the rest of my project posts that also include Renovate Your Faith devotionals.

Want A More Whitewashed Restoration Hardware Look?

Kim, who you can find @sonshine_nurse on Instagram, followed the tuturorial to transform her black dining table and benches. Here is the before:And here is how her table turned out! Doesn’t look amazing?!? I’m really tempted to add a little more of the white dry brushing to my table. For the white, she used Swiss Coffee. I’m so blown away by her transformation. Be sure to follow her on Instagram @sonshine_nurse where she helps busy women to make their health a priority.

Restoration Hardware Finish on a Metal Door

Did you know you can use any faux stain on a metal or fiberglass door to make it look like its made out of real hardwood? To see how I painted my metal back door, click here: The Easy Way To Paint Any Door To Look Like WoodDON’T FORGET TO TAKE A PICTURE!Now that you are done, I’d love to see how it turned out! ❤️ Post your before and after photos here!

FAQ’s: Achieving a Restoration Hardware Salvaged Natural Stain on Furniture

What if I want a DIY weathered wood stain?

If you want a grayer, more distressed wood stain, I would take a look at my Driftwood Finish with Latex Paint. It is a gray, weathered faux finish that a lot of my readers have had great results with!

How Does Restoration Hardware Finish Their wood?

I’m not sure of the exact process but I know they don’t use any sort of protective coating on your wood. So, if you are going to use your table like well, a table, it’s going to need some kind of protective topcoat like Varathane’s Water-based Polyurethane in Matte (click here for the current price.) After lots of testing, this is my go-to clear coat for all furniture!

How Do You Get A Restoration Hardware Finish with Chalk Paint?

You could use chalk paint to get a similar finish using the process above but chalk paint comes in fewer color options so you wouldn’t get the exact shade. Also, cost paint is much more expensive than latex and would require more glaze. Read more about why I prefer latex over chalk paint here: 7 Reasons I Stopped Using Chalk Paint on Furniture

More Posts Related to a Faux Restoration Hardware Finish On Furniture

How to Build a Farmhouse Table (The Easy Way!)How To Paint and Stain Laminate FurnitureEasy, Raw Wood Faux Finish (No Bleach or Stripper Needed!)The Best Clear Coats for Furniture (Tested and Reviewed)A Beginner’s Guide to Furniture Painting (Vintage Vanity Makeover)Easy Turned Leg Coffee Table (Kreg Jig Plans!)Why I Don’t Use Chalk Paint On Furniture

Final Thoughts on The Restoration Hardware Style Finish

Don’t forget to download my Free Furniture Painting Cheat Sheet. To get your printable, sign up for my weekly newsletter which also grants you free access to my resource library full of wall art printables, checklists, and project plans!Before this post, you may not have realized how easy it is to achieve a Restoration Hardware style finish on any surface without stripping or bleaching. Because this process uses latex paint instead of stain, you can be sure of how the final finish will turn out! Also, there are no costly paint products. Thankfully, we are no longer limited by the money in our bank accounts to have this drool-worthy finish in our very own homes and can paint it on furniture to our heart’s content! I love to hear your thoughts and questions! Scroll down to leave a comment and I WILL reply! ❤️Read more: how to create your own payment gateway in phpBlessings,

Be sure to follow the fun here!Email Subscription | Instagram | Pinterest | Facebook | Twitter

How To Achieve a Restoration Hardware Finish, YouTube Video

Faux Restoration Hardware Salvaged Natural Stain

Last, sent you details about the topic “How To Get Restoration Hardware Finish❤️️”.Hope with useful information that the article “How To Get Restoration Hardware Finish” It will help readers to be more interested in “How To Get Restoration Hardware Finish [ ❤️️❤️️ ]”.

Posts “How To Get Restoration Hardware Finish” posted by on 2021-10-27 15:49:06. Thank you for reading the article at

Rate this post

Back to top button