how to get a wired connection in another room

This post contains affiliate links which means I may receive a commission for purchases made through the links in this post. Please see our disclosure for more information. Connecting wired to your home network has a lot of advantages over wireless. It’s faster, much more reliable, and works better with devices in remote rooms. However, wiring has one big hurdle to overcome: how do you get network cables to other rooms? In this article, we’ll look at the basics of home networking and some methods for connecting to the wired Internet to other rooms in your home.

Networking Basics: Routers, Switches, and Hubs

Contents

Before you start running cables through your house, you need to think about how you’re going to connect everything. There is some basic hardware that you need to connect all your devices.

Router

When it comes to home networks, the router is the central part that connects everything together. These devices connect to your (internet) modem, broadcast wirelessly, and often have ports on the back for wired network access (among other things). You may already have a gateway if you’re using a wireless network in your home. Take a look at the back of the router and you’ll probably see several ports for connecting devices via Ethernet cables. If you only have a small number of devices that you want to connect over the wire, the router you already have will almost certainly work. Just make sure you get a port that advertises 1000Mbps (Megabit Per Second) or 1Gbps (Gigabit Per Second) because you don’t want to end up with a router that is slower than your internet speed and accidentally creates congestion. R6230) is a great choice that offers dual-band wireless and has four 1Gbps ports for wired devices.

Switch

When you think about all the devices you want to connect over the wire, you may find that your router doesn’t have enough ports. This is where another piece of networking hardware is called a switch Read more: how to charge a car battery at home without a charger A switch is a device that simply directs traffic coming from multiple ports to one output port only. Think of the switch as a way to add additional ports to your router. If you have a router with 4 ports, you can connect a switch to one of those ports and now have 8 or 12. The switch only serves one purpose, however; they can’t do the other important work your router does, so you still need both. You can find switches for home network for as cheap as $25 but prices vary by brand, number of ports, etc. Make sure you get a switch with speed match or better than your router (1Gbps or 1000Mbps recommended). The 5 Port Gigabit Ethernet Unmanaged Switch (GS105NA) is a great starter switch for wiring in a small number of devices. to one of the switches on your router using an Ethernet cable. Then plug any devices you want to network into the switch. If you have an older model that lacks a link up port, you may need to connect to the router with a crossover cable instead. Even so, most modern switches will work with a normal Ethernet cable.

Center

Hubs are devices that are often confused with switches, but they Not same. These devices handle network traffic completely differently than switches. Switches operate on broadcast model while switches use virtual circuit model. This means that switches transmit network traffic to all devices connected to it while switches transmit data only to the destination device. and cause other problems. If you’re not sure what you’re doing, use a cheap adapter through a hub.

Two methods to get wired Internet in other rooms of your house

There are two methods for wired connection to other rooms in your home. The first method we will cover is the easiest, but unfortunately has some major downsides which we will discuss below. I know that sounds a bit crazy, but it’s actually my preferred method when running cable isn’t an option.

Method 1: Run an Ethernet cable

Read more: How to install an aboveground pool liner with a deep end The easiest way to get wired internet access to other rooms in your home is to simply run an Ethernet cable from your router to your devices. Having loose cables running through your home isn’t ideal, though, so what options do you have? Well, they’re not great but you can run them under carpet, behind furniture, or tape them along baseboards. There are also a number of products on the market that can help you hide your cables or at least keep them away.

Method 2: Ethernet over Powerline adapter

Another way to get wired internet access in other rooms of your house is through these super handy devices – power line adapters. These devices plug into your electrical outlet and use the existing electrical lines in the house to transmit data – how cool is that?! They are not a perfect replacement for a real Ethernet line, but they will be faster and more reliable than a wireless connection. I use them in the house and have never thought about going back to wireless. The installation is also quite easy. Just plug the powerline adapter into an outlet near your router and connect it to the router via an Ethernet cable. Then, in another room, plug the power line adapter into an outlet near the device and connect it to the device with an Ethernet cable. If you need to connect more devices, you can simply get more adapters and add them to the network. All of them will transmit data to the adapter connected to your router. You’ll want to make sure you’re plugging them into an outlet and not a power strip as doing so could cause problems. . If you’re not sure where to start, we recommend the TP-Link AV600 Powerline Ethernet Adapter. Your experience may vary depending on the wiring in your home, so make sure your purchases get a refund if they don’t work for some reason.Read more: how to lock images in word | Top Q&A