How To Factory Reset Tru Bolt Lock
As the title says, this post has instructions on how to program the Tru-Bolt Electronic Door Lock So if you are looking to program your Tru-Bolt electronic door lock but not sure how to do it , then this article is your choice- In the next few paragraphs, I’ll show you how to change your Preset Programming Code, add or remove User Codes, factory reset, and more. Let’s start! See image below for keyboard/button functions.The image is adapted from the Tru-Bolt electronic lock user manual.
How to change the preset programming code on the Tru-Bolt . electronic lock
Contents
A new Tru-Bolt electronic lock comes with a Preset Programming Code (Master Code) giving you access to all other settings. That is, to add or remove User Code, enable auto-lock and other settings, you need to enter your Programming Code. The preset programming code is 123456.For security, you need to change this code after installation. So here’s how to change the Preset Programming Code on the Tru-Bolt electronic lock:
- Step 1: Enter the Preset Programming Code (123456) and press Unlock button.
- Step 2: Press 4 and then press Unlock button.
- Step 3: Enter your new Programming Code and then press Unlock button.
- Step 4: Re-enter the new Programming Code and then press Unlock button.
The lock will beep once and the indicator will light green — indicating that you have successfully changed the preset programming code.Note: If you’ve changed your Programming Code in the past, you can also change it back using the method above — using your existing Code. That is, instead of entering the Preset Programming Code, enter the current code that you changed to before.
How to add a user code on the Tru-Bolt . electronic lock
The User/Access Code acts like a physical key allowing you to unlock your door. This key allows you to add up to 50 User Codes — which you can share with anyone you want to give access to your home while you’re away. The Key comes with a Preset User Code—1234, will be automatically deleted after you add the new User Code of your choice. Furthermore, each User Code must be a combination of 4 to 8 digits and associated with the User ID. The User ID for this key is any number between 01 and 50. So each User ID is associated with a unique User ID.
- Step 1: Enter your current Programming Code and then press Unlock button.
- Step 2: Press first and then press Unlock button.
- Step 3: Enter the user ID (from 01 to 50) and then press Unlock button. Make sure you enter a unique User ID — not previously associated with another User ID.
- Step 4: Enter the new User Code (4 to 8 digits) and press Unlock button.
- Step 5: Re-enter User Code and then press Unlock button.
If the lock beeps once and the indicator light is green, the new User Code has been successfully added Read more: how to tell if a kiss means anything | Top Q&A That’s all you need to generate/add User Code on Tru-Bolt electronic stopper. Repeat the process to add more User Codes — if you want.
How to remove the user code on the Tru-Bolt . electronic lock
This key allows the user to delete one User Token or delete all User Tokens at once. Let’s start with deleting a UserCode:
- Step 1: Enter your current Programming Code and then press Unlock button.
- Step 2: Press 2 and then press Unlock button.
- Step 3: Enter the User ID associated with the User Code you want to delete and then press Unlock button.
- Step 4: Re-enter the User ID associated with the User Code you want to delete and then press Unlock button.
The lock will beep once and the indicator will light green — this indicates that the User Code has been removed successfully.Remove all user codes at once:
- Enter your current Programming Code and then press Unlock button.
- Press 3 and then press Unlock button.
- Re-enter your Programming Code and then press Unlock button.
Is the lock indicator light green with a beep sound? If yes, then all existing User Codes have been removed successfully.
How to Enable or Disable Auto-Lock
With this feature enabled, your lock will automatically lock when it is unlocked within seconds — depending on how it was programmed. So, here’s how to enable auto-lock on your Tru-Bolt electronic door lock:
Now, your auto-lock is active, which means it will automatically lock the door when you leave it unlocked for a while — depending on the time value you’ve set. To disable auto-lock, follow the same procedure as above but set the time to be valid for 00. That is, repeat steps 1 to 2 and then enter 00 is the time value before you reach Unlock This button will cancel the auto-lock feature immediately.
How to enable or disable sleep mode
Sleep mode is one of the great features in this lock. When this feature is enabled, all keyboard/button functions will stop working, meaning you can’t unlock through the keyboard or do anything else. This prevents unauthorized access (from those you have specified User Code) while you are away from home. It also helps lock in low power consumption.
To disable sleep mode, press and hold the Unlock button for more than three seconds and then enter your Programming Code. This will unlock the door and disable sleep mode at the same time.
How to factory reset the Tru-Bolt . electronic lock
Read more: how to tile around a bathroom window And it’s all about resetting the Tru-Bolt electronic lock to its default factory settings. The lock will beep once and the indicator will light green, confirming the process is successful. If the indicator light is red, the process failed and you may have to start over. Make sure you immediately press Lock up button three times within three seconds after you hear a long and short beep. Note that factory resetting your key will erase all previous settings including User Code and Programming Code. So you will need to reprogram the new User Code, change the Preset Programming Code, etc. You can also read our article on how to reset the Trilogy T2, AmazonBasics Electronic Lock and Smart Locks other.
Tru-Bolt electronic stopper problems, troubleshooting and FAQ
How do I lock and unlock the Tru-Bolt electronically?
To unlock, enter a valid User Code via the keypad, then press the Unlock button. And to lock the padlock, you just need to press the Lock button on the keyboard. You can also lock and unlock with a physical key.
How to disable keyboard/lock sound?
Here’s how to turn off the sound on the Tru-Bolt electronic lock:
- Enter your current Programming Code and then press Unlock button.
- Press 6 and then press Unlock button.
- Press 1 and then press Unlock to complete the process.
To turn on the sound, repeat the first two steps above and then press 2 for the last step (instead of 1) before pressing Unlock button.
How to reprogram the Tru-Bolt electronic lock?
Reset the key to factory settings and then reprogram the User Code, New Programming Code and more.
Why is my key frozen and the keyboard unresponsive?
To fix this, turn the thumbwheel (located on the interior assembly) and then lock and unlock it twice.
Why doesn’t my lock work electronically?
Check that the battery is still functional and properly placed. If not, replace the batteries with high-quality non-rechargeable alkaline batteries and make sure they are in place — based on polarity (+ -) Also, check that the control cords are properly attached to the side assembly in yet.
Tru-Bolt Lock keeps beeping — what to do?
More often than not, the frequent beeps and flashes on your Tru-Bolt Key indicate that the battery is low. Replace them with 4 AA alkaline batteries. Lithium batteries should not be used and do not mix old batteries with new ones to avoid battery leakage and other problems.
End
So that’s how to program/reprogram the Tru-Bolt Electronic Lock. I hope this article was helpful and you can create or delete User Code, change Preset Programming Code, restore factory settings etc. Read more: How to install halo light on jeep wrangler
Last, Wallx.net sent you details about the topic “How To Factory Reset Tru Bolt Lock❤️️”.Hope with useful information that the article “How To Factory Reset Tru Bolt Lock” It will help readers to be more interested in “How To Factory Reset Tru Bolt Lock [ ❤️️❤️️ ]”.
Posts “How To Factory Reset Tru Bolt Lock” posted by on 2021-10-25 01:09:14. Thank you for reading the article at wallx.net
