How To Drain A Pool With A Cartridge Filter

When should I flush my swimming pool?

In case your water has a high Total Dissolved Solids (TDS) level, the Pinch A Penny expert may recommend draining some water from your pool and adding fresh water.
If you know that a major tropical storm or hurricane is approaching, you may also want to drain some water to prevent overflow.
In case you need to repair or change the surface, technicians will handle the process.

Even so, consult an expert before deciding to get the water out. These steps apply to in- and above-ground pools, as well as chlorinated and saltwater pools. If you decide this is a necessary step, this article will walk you through how to drain the water out of your swimming pool, no matter what type of filter you have. discharge a swimming pool through the skimmer. This could cause your pump to dry out, damage or destroy it.Read more: how to set a password for netgear wifi routerHow to Flush a Pool with a Cartridge Filter For pools with cartridge filters, there are two ways to achieve this.1. Use a drain plug

Turn off the pump.
Go to the back of the filter and remove the drain plug.
Turn the pump back on and let the water run until it reaches the point you want to drain the water out.
Turn off the pump and re-insert the plug into the discharge plug.

2. Use a Drain Valve – If your system has a valve in between the pump and the filter.

Turn off the pump and turn the valve so that it blocks the water from going to the filter.
Turn on the pump and water will come out from the opening.
When you’ve got enough water, turn off the pump and turn the 3-way valve back to its normal position. This way, water can go from the pump into the filter again.

Read more: how to crack camtasia studio 9 | Top Q&AHow to Flush a Pool with a Sand Filter

Turn off the pump.
Roll backwash hose to yard or approved drainage area.
Turn the multi-port valve on the top or side clockwise to the “Waste” position.
Turn the pump back on.
After you get the right amount of water from your pool, turn the pump off again.
Turn the multi-port valve from the “Waste” position, clockwise, back to “Filter”.
Lift the backwash spout to help drain all the water out and roll it up.

How to Flush a Pool with a DE . Filter

Manually turn off the pump at the breaker box.
Turn the multi-port valve clockwise until you get to “Waste”.
Turn the pump back on.
When you have removed enough water from the pool, turn off the pump.
Turn the handle on the multiport valve clockwise until you return to “Filter”.
Turn the pump back on.

If you have any other questions, please call your neighborhood Pinch A Penny. Click below to find a store near you! Find a trend near you Read more: How to Play Moira: Overwatch Strategy, Tips and Tricks | Top Q&A

Last, Wallx.net sent you details about the topic “How To Drain A Pool With A Cartridge Filter❤️️”.Hope with useful information that the article “How To Drain A Pool With A Cartridge Filter” It will help readers to be more interested in “How To Drain A Pool With A Cartridge Filter [ ❤️️❤️️ ]”.

Posts “How To Drain A Pool With A Cartridge Filter” posted by on 2021-10-23 13:27:20. Thank you for reading the article at wallx.net