How To Cut A Screw Without A Hacksaw

In my experience, this most often happens when the screw head is stripped or the nail head is bent and you can Otherwise don’t remove it or drive it deeper. Piercing metal, even as small as a screw or nail, can seem difficult to those who have never done it.

What you need:

Contents

There are many methods for cutting screws. Each type requires a different set of tools.Method 1: Snipping Method 2: Hand saw Method 3: Jigsaw puzzles

Puzzle
Metal cutting blade

Method 4: Reciprocating saw

Saw piston
Metal cutting blade

Method 5: Bolt cutterAlways remember to install the metal cutting blade before attempting to cut screws, nails and other metal with the power saw.

Method 1: Wire cutter

There’s no simpler way to cut through a screw or nail with a pair of wire cutters. want a pair with the chamfers in contact after the cut is complete. They are called anvil cutters (others have equal cutting blades), in addition, of importance is the long handle. The longer the handle on your wire cutter, the easier it is to cut through screws and nails with minimal force. be cut.

Method 2: Hand saw

A hacksaw is a very fine toothed hand saw specially made for cutting metal. See our side-by-side comparisons of the best hand saws. You can actually use a woodworking hand saw to accomplish the same task. According to Lifehacker, you can accomplish this by making a few small marks and divisions on the back of the saw blade with a hammer. or other hard object. back of blade for sawing through screws or nails so as not to damage the wood cutting side of the blade.

Method 3: Jigsaw puzzles

Metal cutting blades are available for almost any power saw. blade, simply run the jigsaw through the nail or screw you want to cut. Note that the jigsaw must be placed on a flat surface to make the cut. This makes them much more precise, but at the same time it also limits their versatility.

Method 4: Reciprocating saw

My favorite way of cutting screws is using a reciprocating saw, also known as a saw, this power tool is one of the most versatile saws for cutting nails and screws. It is much faster and more efficient than using a wire cutter or a hand saw and much more flexible than a jigsaw Read more: how to dry polyurethane When I resist a nail or screw that I need to cut on a woodworking project, I usually just use my saw to do the job. This tool is especially effective when cutting hard-to-reach screws and nails, especially if you need to cut one that is holding two pieces of wood together. screw or nail. Be sure to hold the saw guard of your saw firmly to the wood while making all cuts to limit binding and clamping.

Method 5: Bolt cutter

Similar to wire cutters, bolt cutters allow you to cut through screws or nails with the power of your hands. It has a longer handle to give you more leverage and a larger, sharper blade for easier cutting. Metal cutters are especially effective at cutting thicker than normal screws, nails and screws.

Epilogue

Cutting through screws, nails, and other metal pins is really easy once you know how. So, why not test this new skill by taking on one of our top woodworking projects on your next adventure? Talk to a tool expert in minutes, 24/7