How To Cut A 60 Degree Angle On A Table Saw

When we talk about woodworking or woodworking, angles play a pretty important role, right? Usually when making different cuts we use different types of angles. Sometimes it is quite simple and easy to understand even for beginners in the field, however, with the passage of time and increasing projects, you will inevitably face the shapes more complex than basic angles. So while you’re learning to cut corners, make sure to do that part well. Because it will shape your ability to handle cuts of more complex shapes in the near future.

How to cut a 60 degree bevel on a table saw:

Contents

Clever Trimming Using An Irregular Tool.There are usually bevel cutting tools used for the purpose. The hybrid table saw is also a good choice for this job. Therefore, a 60-degree bevel cut is generally considered difficult. Let me talk about this topic and you will soon start to recognize other types of corner cuttings easily. Just like how solving a math problem leads to understanding other similar problems from the same chapter. So I hope my intentions are clear and if so, let’s dig into more below.

General idea of bevel cutting

It’s useless to start without knowing what beveling really is. When you make angle cuts, it’s usually 90 degrees. However, when you need to make a cut with an angle other than 90 degrees, it’s called bevel Read More: How to Draw a Rainbow Maximum dimensional wood with square edges is set. This indicates that the angle in the edge and face of the board is usually 90 degrees. It may be necessary to change the angle other than 90 degrees. In addition to the table saw, there are other tools that can make the cut. You can use a jigsaw, router, or even a circular saw for this task. However, jigsaw puzzles often don’t deliver the exact cuts expected. These cuts can work for tasks like molding furniture or decorating cabinets. In addition, the photo frame construction can also become elegant with beveled edges. To complete procedures such as mold matching, the bevel cutting stage comes into play. It is seen in a popular method known as splicing. The operation of the French cleat is also completely dependent on the bevel cutting. They are useful for handling huge objects on the wall.

60 degree angle cut-How I do it

Using a table saw to cut corners isn’t really that difficult or complicated. You just need to understand the whole process well before trying it. I suggest you read the steps a few times. Hopefully that way you won’t miss any important points while working. Table saws can usually only cut up to that part, which is often the main reason why table saws or cutting saws have to adjust and achieve this angle to the maximum. Since we need to make a cut larger than 45 degrees, the necessary adjustments are needed. We’ll explore the math of making such adjustments below.

Determine the right angle

First, you need to figure out how well the angle fits. For that to happen, simply subtract 45 from the target angle. Here we are dealing with a 60 degree bevel cut. So we need to set an angle of 60 minus 45 equal to 15 degrees.

Adjust to the proper angle

Read more: Warm and cozy with this premium quilted jacket DIYT must have a knob or handle to make adjustments in the table saw. The next step involves using these handles to give the proper angle on the table saw. Here, the right angle to set is 15 degrees which we will set exactly.

Wood position

Now it’s time to place the material on the saw table. You should put it on the saw vertically. Use another piece of scrap wood. Now just place it adjacent to the main material. Make sure the position is facing the blade.

Tongue lift

Now it’s time to bring the blade to a higher position. By raising the height of the blade, you will allow the wood to be cut at a greater angle. Using the handle or knob, you can control this height. Usually, the knob is located on the front of your table saw.

Cut

Now just turn on the machine and push the material. Never use too much force. This will result in cuts and uneven surfaces later on. Also, make sure you’re holding the document firmly with both hands. Using clamps will give better results.

Handling uneven bevels

Mistakes are not surprising and this is no different when cutting at bevels. Sometimes, even with the most careful observation and steps, you can still make uneven, oblique cuts, usually due to thin wood fins. This is the part where saw blade not achieved and make cuts. You can easily solve the problem using a small clipping plane. The plane has a flat and flat bottom. There is also a small cut forming a protruding blade. The only difference is that with a plane you can decide which part the blade is in contact with and control it accordingly. Usually starting with fewer blades works better. Gradually you can expose more parts of the blade depending on your requirements.

Inference

So that’s the process on how to cut a 60 degree bevel on a table saw. You can use the same technique to cut to any degree this way using a table saw. I just tried to present an example case to explain better. Hopefully, my post will be useful enough for future projects and you’ll be able to create lots of beveled decorations that will captivate your final pieces.