How To Clean Marble Fireplaces & Surrounds

Marble fireplaces are a bit special. They’ve been used for hundreds of years to accent a room, and they’re still as popular today. especially from acidic materials. Therefore, it is important that it is cleaned regularly, and if you spill something on it, it should be cleaned immediately. Good as new. NOTE: This is for natural marble only – we also sell micro marble fireplaces which are a whole different beast and have separate instructions. :

Oil cellar

Contents

Read more: How to get rid of air from cooling water c5CauseGrease, tar, cooking oil, milk, cosmeticsWhat does it look likeDarken iceRead more: how to copy css encrypted dvdHow to cleanIf it is an oil-based stain, it must be chemically dissolved. Don’t worry: if you do it fast enough and don’t let the stone rest it won’t damage the marble. Clean the stone gently with a soft, liquid cleaner with bleach, household cleaner, ammonia, mineral spirits or acetone.

Organic

Read more: How to get rid of air from cooling water c5CauseAnything natural – coffee, tea, food, tobaccoWhat does it look likeMay cause a pinkish brown streak but may depend on what it was spilled with. Read more: how to copy css encrypted dvdHow to cleanUse 12% hydrogen peroxide (a fixative for hair dye) and a little ammonia.

Water

Read more: How to get rid of air from cooling water c5CauseWater overflows, leaving glass on surfaceWhat does it look likeOrdinary blobs or rings of water Read more: how to copy css encoded dvdHow to cleanUse dry 0000 steel wool

Squid

Read more: How to get rid of air from cooling water c5CauseMarkers, biro, markersWhat does it look likePretty much what you imagine the ink would look likeHow to clean itSince marble is usually light in color, use bleach or hydrogen peroxide, but use only a little at a time to make sure it doesn’t discolor. For darker stones, you should use an acetone or lacquer thinner.

See Also  Sistema 1.63 l salad max to go

Paint

Read more: How to get rid of air from cooling water c5CausePaint spilled when decoratingWhat does it look likeDepends on the color and how much you poured!How to clean itIf it’s just a small amount of paint, you can use a lacquer thinner or even scrape it off with a blade. If it’s a lot of paint, then you’ll need to use a commercial paint remover, which contains lye or caustic soda – DO NOT use acid or flame to remove the paint. it for you. Oil-based paints can leave an oily residue after wiping – refer to the ‘oil’ section of this guide.

Fire and smoke damage

Read more: How to get rid of air from cooling water c5CauseFire and smoke from a fire or elsewhere if you have a fire at homeWhat does it look likeBlack or dark gray burn marksHow to clean itYou should get a professional cleaner or use a ‘smoke remover’ to help restore your marble fireplace to its former glory.

Metal

Read more: How to get rid of air from cooling water c5CauseRust, iron, copper, etc. Can come from nails, screws, cans, fireplace side tools, etc.What does it look like

  • Iron rust – orange brown
  • Copper and bronze – green or opaque brown

How to clean itStains from metal must be removed using a poultice – a liquid or chemical cleaner mixed with a white absorbent material to form a paste. This will remove the stain within 24-48 hours. You can buy a poultice or you can make your own depending on the type of stain you’re trying to remove. See below for how to make your own poultice for stains. Some metal stains, if left for a long time, cannot be removed forever.

See Also  How To Draw A Unicorn Step-by-Step For Kids

Biological Justice

Read more: How to get rid of air from cooling water c5CauseMold, mildew, moldWhat does it look likeMay be powder, green or brown. Obviously you know what mushrooms look like.How to clean itUse diluted ammonia, bleach, or hydrogen peroxide (½ cup in a gallon of water). DO NOT mix bleach and ammonia as it will produce deadly toxic gas!!!!

Tips for cleaning marble fireplaces or around

Here are some more general tips for getting those pesky stains out of your lovely marble fireplace or around…

  • Use a soft microfiber cloth to remove surface dirt.
  • Use warm (not hot) water.
  • Gently rub the stain with a cloth, increasing pressure if the stain is stubborn.
  • Flush the fabric regularly to keep it clean.
  • Use distilled water if possible as any impurities in the water can stain the marble.
  • Dry with a soft cloth or towel – do not air dry as this may cause water stains.
  • Avoid using white vinegar or lime scale removers as they contain acids or baking soda which can be abrasive and can affect the finish of the marble.
  • Carefully read the directions for use on any cleaning product you use, and start with a small amount to test.
  • You can use marble wax to make soccer balls.

How to make your own poultice for stains

You will need to purchase an absorbent base for your poultice that can contain materials such as talcum powder, chalk, kaolin, and diatomaceous earth. Here’s how to make a poultice for stains:Oil-based stains

  • poultice with baking soda and water; OR
  • One of the ingredients for powdered poultice mixed with minerals

Copper stains

  • Poultry with one of the powdered materials and ammonia. This can be a particularly difficult stain to remove so some application or even professional help may be required.
See Also  Best electric tea kettle with infuser

Organic stains

  • Poultry with one of the powdered materials and hydrogen peroxide or acetone

Iron stain

  • Poultry with diatomaceous earth and rust remover. Again, you may need a professional for this if it fails.

How to apply poultice on stains

The consistency of the poultice should be close to that of peanut butter, and when you’re ready to apply to the stain, follow these instructions:

  • Moisten the affected area with clean water (distilled if possible).
  • Spread the poultice evenly over the stain so it’s about ½ inch thick, overlapping a bit around the sides.
  • Cover the poultice with a piece of plastic wrap (a plastic bag will do that) and bandage it.
  • Let the poultice dry and do the magic – this will take about 24-48 hours. After about 24 hours, remove the plastic.
  • Remove the poultice from the stain and clean the marble with clean water (if possible re-seal if possible).
  • Wipe dry with a soft cloth.
  • If the stains are particularly stubborn and deeply rooted, it may take several applications before the stain is completely gone.

Browse our wide range of marble fireplaces and marble fireplace surrounds today or contact us if you have any questions about cleaning and maintaining them.Read more: how to break a bench press plateau

Last, Wallx.net sent you details about the topic “How To Clean Marble Fireplaces & Surrounds❤️️”.Hope with useful information that the article “How To Clean Marble Fireplaces & Surrounds” It will help readers to be more interested in “How To Clean Marble Fireplaces & Surrounds [ ❤️️❤️️ ]”.

Posts “How To Clean Marble Fireplaces & Surrounds” posted by on 2021-08-22 13:32:03. Thank you for reading the article at wallx.net

Rate this post
Back to top button