How To Charge A Lipo Battery For The First Time

Lithium Polymer Charge/Discharge & Safety InformationLithium Polymer Safety Tips: Lithium Polymer (LiPo) cells are a huge step forward in battery technology for RCs, UASs, UAVs, Drones and Robotics. However, due to the chemical nature of lithium cells, fire can occur if not properly charged and cared for. This is no different from many of the things we use in our daily lives – knives, gasoline, kitchen cleaners, cars, for example – which are inherently dangerous but can be used safely by Follow some simple rules and precautions.

  • Never leave the battery unattended while charging.
  • Be absolutely sure that the Lithium Polymer charger settings are correct for the battery pack being charged – both voltage and current settings.
  • Lithium Polymer must be CHARGED and STORAGED in a fire safe container such as the Lipo Sack.
  • Do not charge the battery near flammable liquids or objects.
  • Keep a dry fire extinguisher nearby or a large bucket of dry sand, it is a cheap and effective fire extinguishing medium.
  • Never charge inside a car even while it is parked.
  • Always keep a PIN for children and pets.

Read: how to charge a lipo battery for the first timeRelation: Make sure that the correct polarity is observed when connecting the battery pack to the charger or the ESC.RED = POSITIVE (+) BLACK = NEGATIVE (-)Charge/Discharge: Your new battery pack reaches between 30-60% SOC depending on how it was shipped. Fully charge your pack before first use. Charge your LiPo battery only at 5C or below in the LiPo setting. You must use the same balanced charging system as the Hyperion, Hitec, EV-Peak or Graupner chargers offered here at MaxAmps. Otherwise, you run the risk of your pack becoming severely unbalanced over time, which will significantly reduce its lifespan. Example: If you charge a 4000mah LiPo pack at 1C, you will charge it at 4 Amps. Example: If the balance charges a 4000mah LiPo pack at 5C, you will charge it at 20 Amps.Please consult your owner’s manual for the recommended ESC cut-off voltage for your particular application prior to first use to avoid accidentally over-discharging your battery.DO NOT charge your LiPo pack on a NIMH/NICD charger. Your charger must be designed for LiPo batteries. Do not charge above 4.2V per cell or over discharge less than 3V per cell. Never leave LiPo packs unattended while charging or after your vehicle has been impacted. Do not leave the battery plugged into the vehicle when not in use. The package can still discharge to unsafe levels and damage the package even with all components turned off. Read more: how to hack bluetooth speakers | The top Q&AIt is dangerous when it comes to drawing more power than what the package is rated for. This will void the warranty on the packaging and could also cause your battery pack to catch on fire. The temperature of the pack should never exceed 140 degrees F. If so, you may need a package rated to handle more power.Storage process: When not using your LiPo/Li-Ion battery pack, store it at approx. 60% of the rated capacity of the pack in a room temperature environment. Make sure to use or cycle your packs at least once per month as leaving them on the shelf for long periods of time can cause the packages to become severely unbalanced, swell/bulge or even die.Balanced Faucets on LiPo/Li-Ion Packages: All MaxAmps LiPo/Li-Ion packages come standard with a JST-XH style balance tap (white connector), compatible with most industry standard balanced chargers. Always charge the balance battery before each use as this “matches” the voltage of each cell to give you the best performance and longest life.Handle With Care:

  • Never leave batteries inside a hot car or garage or anywhere else where the temperature can exceed 140F/60C.
  • Although environmentally friendly, lithium polymer cells must be completely discharged before disposal. Use a resistor setup (e.g. a light bulb) to do this, to avoid the possibility of a fire due to an electrical short after disposal.
  • Immediately stop using damaged batteries and dispose of/recycle accordingly.
  • Do not place loose cells in pockets, bags, or drawers where they could short-circuit other items, or the battery tabs could press against each other.
  • Do not place removable cells on any conductive surface, such as a metal-covered table.
  • We recommend purchasing pre-assembled packages rather than assembling packages from loose cells.
  • Take care that the cells are not punctured, especially by metal objects such as hobby knives.
  • If the intracellular electrolyte gets on your skin, wash it thoroughly with soap and water. If in eyes, rinse thoroughly with cool water. Seek immediate medical attention if burned.
  • Although our batteries are now watertight, we do not recommend soaking them for long periods of time. The battery packs will be protected under normal rc condition.
See Also  We Cut Down Glare By Flocking Our Dash

Read: how to charge a lipo battery for the first timeAll Lithium Polymer Batteries that we carry are approved for RC use only and must not be used in any other application. Discharges, battery charging, electric motors, spinning propellers and flying models all have the potential to cause serious injury to people and damage to property. By purchasing these products, the user agrees to assume all such risks and not to charge the battery manufacturer, distributor or retailer – (all including owners and employees) – liable for any accident, personal injury or property damage The use of Lithium Polymer batteries in radio controlled models is considered experimental and no warranty is expressed. or implied, by the manufacturer, distributor or retailer in connection with the replacement of the vehicle, charger or damage to property or persons, as well as any other use or aspect otherwise unless otherwise stated.LiPo Battery Warmer / “Bumping” LiPo Pack:Read more: how to get rid of the help virus instantly Do not, under any circumstances, try to “warm up” your battery or increase the voltage of a pack above 4.2V per cell using devices or techniques this art. Some crafty lithium polymer retailers/distributors have suggested using these devices and techniques to increase the performance of your lithium polymer packs. THIS IS UNSAFE AND PLAYING WITH FIRE! Devices on the market that heat lithium polymer batteries can increase the risk of fire. Lithium polymer battery manufacturers suggest that exceeding 140 degrees is NOT a safe temperature for lithium polymer batteries. At 140 degrees, the package can become unstable and very dangerous. The small performance increase is not worth the fire risk. PLEASE BE SMART AND SAFE BY DON’T USE THESE PRODUCTS! Some retailers/distributors of other brands of lithium polymer batteries have suggested that customers and their riders “increase” the voltage of their packs by using settings other than the lithium polymer setting. on their charger. Lithium polymer battery manufacturers recommend a voltage range of 3V-4.2V. Increasing the voltage above 4.2V per cell is not safe. You should never attempt to charge your packs beyond the voltage set for the lithium polymer packs on your lithium polymer charger. Using other battery settings to “collision” with voltages in excess of 4.2V per cell may cause fire and injury. The small performance increase is not worth the risk of explosion. PLEASE DO NOT USE THESE METHODS!Lithium Ion 18650 Safety Tips and Warnings:WARNING – The user must have a proper understanding of the potential hazards of the LITHIUM ION BATTERY prior to purchase and use. No warranties, express or implied, of compatibility, fitness or fitness for any particular purpose or device can be made. This battery is manufactured and sold for system integration use with appropriate protection circuitry or battery pack with BMS (battery management system) or PCB (circuit board/module). This battery is not designed and is not intended for use with unprotected E-CIGARETTE, VAPORIZER or similar equipment. LOSE OR IN A POCKET, PURSE, ETC. ALWAYS USE A PROTECTIVE CASE OR BOX FOR STORAGE AND TRANSPORTATION OF BATTERIES THAT CAN EXPLOSIVE, ON OR FIRE IF CAUSE OR USE ONLY use with proper protection circuit DO NOT short circuit intentionally or unintentionally KEEP away from metal/conductive objects to prevent short circuits. DO NOT use if battery, wrapper or terminal insulator is damaged or torn DO NOT overcharge or charge above maximum voltage rating DO NOT over discharge or exceed continuous discharge rating DO NOT modify, remove disassemble, puncture, cut, crush or burn DO NOT expose to liquids or high temperatures DO NOT KEEP with pets and children ALWAYS Charge in or on fireproof surfaces and never leave batteries charging unattended Use ONLY smart chargers designed for this particular battery type DO NOT mix brands and models, old and new batteries, used and unused STOP immediately if during charging/storage / using batteries that emit an unusual smell, feel hot, change color or shape, or appear unusual in any way It is your responsibility to determine that your charger or device is functioning properly. Normally If in contact with battery electrolyte, rinse immediately with water and/or contact your doctor or emergency services. HE threw it in the trash; contact your local jurisdiction for proper recycling or disposal Click here to download Lipo Care in PDF format Download Adobe Acrobat ReaderRead more: how to keep yarn tangle-free

See Also  How To Base Miniatures | Top Q&A

Last, Wallx.net sent you details about the topic “How To Charge A Lipo Battery For The First Time❤️️”.Hope with useful information that the article “How To Charge A Lipo Battery For The First Time” It will help readers to be more interested in “How To Charge A Lipo Battery For The First Time [ ❤️️❤️️ ]”.

Posts “How To Charge A Lipo Battery For The First Time” posted by on 2021-09-15 16:18:29. Thank you for reading the article at wallx.net

Rate this post
Back to top button