How To Change Brake Pads On Bmw 328i

You should check the brake pads every time you service your BMW E90. Replace brake pads if the thickness is 2.4 mm (0.09 in.) or less. There are brake pad wear sensors that will trigger a warning light when the pads are at a minimum, however, this sensor is only placed on one brake per axle. This leaves 3 brake pads on each axle unattended by the warning system. This is why it is important to check periodically. When replacing brake pads, you can change pads on one axle at a time; Has a handy new brake pad wear sensor. While the sensors can be reused, they become brittle and do not always fit the new gasket when used again. On late BMW models, including the E90, the brake pad wear sensor has been updated. It is now more specialized and breaks easily when removed. The sensor is no longer a simple wire circuit that breaks when gasket wear reaches a minimum, it is now a two-stage wear sensor. This provides the vehicle with more precise brake pad monitoring. So if the sensor shows a little wear, replace it. In this article, I will show you how to replace the brake pads on the front axle of your car. Replacing the rear brake pads is the same. Read more: how to change brake pads on bmw 328i Read more: how to be confident on the roadLift and your car’s support axle are changing brake pads. See our technical article on how to activate your vehicle. has all the parts you’ll need to get your car running at its best including filters, fluids, brakes, spark plugs, lights and more for your E90! Read more: how to open a dvd . file