How To Change A Drill Bit Without A Chuck Key
“Drill Chucks” by Nottinghack is licensed under CC BY-SA 2.0 If you are reading this, chances are you are the owner of a drill, a large drill or one of those older drills. never stop working. And I would also guess that you lost the chuck key, or you broke it after years of use (those are damned, am I right?). Luckily, you found this post and I’m going to stop you from throwing your drill out the window (good luck with that if you have a drill!). Now, let’s stop wasting your time and start it. If you are in a hurry, Here’s a quick guide on how to change your drill bit if you don’t have a chuck key:Read: how to change drill bits without a chuck key
If you want to learn more, or you want to hear about other ways to get things done, don’t miss the rest of the article!
How to change drill bits without locking Chuck (first solution)
Contents
This is one of the possible approaches. I have done it many times with success. You will need:
- A pair of pliers. They can be slide joints, blades and grooves, locking pliers or locking pliers. Whatever you have available is large enough to grip the drill chuck. You can also use a strap wrench if you have one.
- A drill Fits the holes where you usually put the chuck key. Other things will also work, but I’ve found that the shank of the bit usually fits very well in the chuck hole.
That’s it. Now let’s get started. I’ve made the process a list to make it easier to read.
1. Unlock the chuck and remove the bit
- Place the drill bit (not the drill head but the shank) inside one of the chuck keyholes. Use gloves or cloth to wrap around the cloth so you don’t risk cutting your hand.
- While holding the pin in place, take the pliers and use them to clamp the chuck. If you’re concerned about the jaws ruining the appearance of the chuck, cover it with cloth, a piece of leather, or whatever you have on hand.
- Hold the bit still and rotate the chuck counterclockwise to unlock the bit. You can also move them at once if you feel better that way.
- The chuck will come loose, and you can take it off without any problem.
2. New bit setting
- Put the new bit in place and lock it manually. Turn the chuck while holding the drill bit. This way the bit won’t fall out.
- Same as before: place the drill bit into one of the chuck holes, and use the pliers clockwise to tighten the drill chuck.
- Just one hole should suffice, but especially if you have an old drill bit you should check that the other holes are screwed in properly.
3. Check drill bit
- Before you start working, you need to check that your bits are centered properly. To do this, set your drill in motion and check for any wobbling. Otherwise, you’re good to go.
Read more: Want to wax your vulva? This is all you need to know This approach is perfectly fine in my opinion (I’ve done this many times). Some people might warn you, though, that you could damage your chuck drill in this way. If you are using wrench strap, then your chuck will be perfectly fine. If you want to be absolutely safe, in the following paragraph I will present you with another solution.
How to change drill bits without locking Chuck (2nd solution)
In this case you will need:
- One flat head screwdriver. It should be large enough to fit properly in the teeth of the chuck drill.
- Like before, a countersink matching chuck lock.
1. Unlock the chuck and remove the bit
- Place the drill bit inside one of the chuck keyholes. Again, for your own safety, use gloves or cloth to wrap around the tear.
- While holding the bit in place, use a screwdriver to rotate the gear. To do this, use a drill as a lever. Look at the image at the beginning of the paragraph. It will be pretty easy to understand. A quick hit will be enough to unlock the chuck.
- Once the chuck is loose, you can remove the coupling easily.
2. New bit setting
- Follow the same procedure as described in solution 1. In this case, to tighten the chuck, you would place the screwdriver on the other side of the drill bit, using it as a lever. Just be careful when you apply force to the screwdriver as it can easily slip out of place.
3. Check drill bit
- Similar to before, you definitely need to verify that your bit is properly set inside the jaws of the chuck. To do this, set your drill in motion and check for any wobbling. Otherwise, you’re good to go.
How to change drill bits if you have a keyless chuck
If you have a keyless chuck, it will be difficult to change your drill bit. These chucks are made of 2 parts. You can open them manually, by turning the parts in the opposite direction. Usually, there is also an indicator of how to rotate it (like “unlock” and “close” written on the smooth metal part). The drill bit can be rotated counterclockwise to open the jaw faster. To install a new drill, insert the drill bit inside the jaws and lock it in place by turning the drill clockwise. Hold the chuck still while performing this movement. For extra safety, you can rotate the chuck manually.
Which Chuck Key do I need?
“Chuck Key – Steel, circa 1950-1970” is licensed under CC BY 4.0. If you are missing the chuck key or you have broken it and you are not comfortable with the solution I have suggested before, be change the drill without it, you should consider buying a new one key.Read more: kotor 2 how to make lightsaber There is one important thing you need to consider: Your chuck key must match your drill chuck. There are many different chuck key sizes on the market. In fact you need to match the post and angle and number of teeth. If possible, you should contact the manufacturer of your drill and get a new key from them. If you can’t get one from them, your local store may have stock locks. Make sure to match it to your chuck as best you can. You don’t want to damage your chuck drill. If you own a range of drills with different chuck sizes, you should consider purchasing one of the many chuck keys. They come in a variety of sizes for different chucks. I really like this model: it comes with a magnet in the middle, so you won’t lose it easily. I wouldn’t consider this an off-the-shelf option (a chuck has a much lower value than a keyless chuck), but I’ve heard people do it, so I thought I’d let you know. . Again, make sure to get the right chuck size. Also, if you have an old drill or drill press, you may not be able to find a keyless chuck that’s right for your machine. Here is a list of keyless briefcases available on Amazon.
Conclusion
So, after reading this article, you will be able to change your drill bit, even if you are missing your beloved chuck key. I have presented several solutions, which are must-have tools that you should have on hand. If you are concerned about damaging your drill chuck, you should definitely buy a new matching chuck key. But if you’re in a hurry to finish your current project, your drill will be fine even if you use a pair of pliers on it. I did it for years after I lent my chuck key to a friend and never got it back (yes, you read that right), and my drill bit is perfectly fine. One last thing: When you need to hold the drill bits. sure, you should always wear gloves or wrap them up with something to avoid cutting my hands. I know I’m having a hard time, but I cut my own hand once doing this, so I wanted to avoid any nasty surprises. One more thing (this is the last one, I promise). After you install the new drill, never forget to check that the drill is in place. Always rotate the drill a few times before starting work, to check for any fluctuations. This way you will prevent many accidents. Read more: how to get free gems in hungry shark evolution
Last, Wallx.net sent you details about the topic “How To Change A Drill Bit Without A Chuck Key❤️️”.Hope with useful information that the article “How To Change A Drill Bit Without A Chuck Key” It will help readers to be more interested in “How To Change A Drill Bit Without A Chuck Key [ ❤️️❤️️ ]”.
Posts “How To Change A Drill Bit Without A Chuck Key” posted by on 2021-11-01 14:33:15. Thank you for reading the article at wallx.net
