How Much Atrazine Per Gallon Of Water [Herbicide Mixing Guide]

A high-quality Atrazine product will be effective when mixed at a rate of 4 1/3 ounces per gallon of water. The resulting mixture is sufficient to safely treat 500 square feet of lawn. When applied to grass safe with Atrazine, the herbicide will work to kill broadleaf weeds and weeds without harming your lawn. If used improperly or at too high a concentration, Atrazine can be harmful to desired weeds.

Instructions for mixing Atrazine for home use

When using a 4% Atrazine blend, such as Southern Ag Atrazine, mix 4.33 ounces of Atrazine per gallon of water. To make sure Atrazine mixes completely with water, pour Atrazine into the container first, then the water. One gallon of Atrazine and a mixture of water is enough to kill weeds in a 500 square foot area without harming your grass.

• Mix 4.33 ounces of Atrazine per gallon of water.
• When mixing in a container, pour Atrazine first, then water for best results.
• Apply the mixture to 500 square meters of lawn.
• Does not increase Atrazine content per gallon of water.
• Do not apply Atrazine at a rate higher than what is listed on the product label.
• Do not mix Atrazine with other chemicals.

Read more: How to remove paint from stone If you increase the concentration of Atrazine mix or if you use the mixture at rates greater than 1 gallon per 500 square feet, you risk damaging your lawn. At high levels, Atrazine can become toxic to the lawn you want to protect. Atrazine should never be mixed with other chemicals, additives or herbicides. Since Atrazine must penetrate the soil to be effective (it attacks weeds through the roots), surfactants should never be added to Atrazine.

How to Apply Atrazine to Your Lawn

Atrazine is best applied to your lawn with a pump sprayer or backpack sprayer. Alternatively, use an adjustable end-of-nozzle sprayer with metering controls that allows you to mix 4.33 ounces of Atrazine per gallon. Apply on a day with little or no wind, when the temperature is between 65-90 ℉ (18-32 ℃).

• Use a pump sprayer or backpack sprayer to spread your Atrazine mix.
• Alternatively, use an end-nozzle sprayer system with a metering controller to apply Atrazine.
• Spray Atrazine on a windless or windless day.
• Daytime temperature should be 65-90 ℉ (18-32 ℃) for best results.

If Atrazine is used in windy conditions, the herbicide can be transferred to nearby trees, orchards or property where it can kill crops. Remember, Atrazine attacks broadleaf plants (trees, bushes, weeds, vegetable and ornamental plants) as well as most grasses. It must be used carefully. In addition, Atrazine is not effective outside the temperature range of 65-90 ℉ (18-32 ℃). It will not work if applied in too hot or too cool weather.

Is Atrazine Safe for Your Grass?

Atrazine is only safe for use on St. Augustine, Centipede Grass and Zoysia. Other weeds will be killed by the herbicide.

• Using Atrazine On: The lawns of St. Augustine, Centipede Grass, and Zoysia.
• Do not use Atrazine on: Bermuda Grass, Buffalo Grass, Fescue, Ryegrass, Bentgrass, Kentucky Bluegrass and Cool Season Grass Mix.

Review the manufacturer’s label to make sure your grass is safe for exposure to Atrazine before use.

Is Atrazine effective?

Read more: how to level up faster in witcher 3 When properly mixed, Atrazine is a very effective herbicide, capable of attacking grasses and broadleaf weeds while remaining unharmed to specific grasses. .

• Attacks broadleaf weeds and many invasive weeds.
• As a selective herbicide, which means it will not harm specific weeds (St. Augustine,
• Centipede and Zoysia).
• Kills existing weeds in 14-21 days.
• Works as before germination, killing seeds germinating underground for up to 6 weeks.

Atrazine is unique because it is both a post-emergent herbicide and a pre-emergent herbicide. It is capable of killing both annual weeds and preventing new weeds from sprouting. This is because Atrazine goes into the soil and stays there for several weeks. It will trample the clover in your yard and kill new seeds as soon as they try to sprout.

How many Ounces of Atrazine per Gallon of Water?

The ideal mix for 4% Atrazine solutions is 4.33 ounces of Atrazine per gallon of water. This amount, when applied with a pump, backpack or end-of-nozzle sprayer, can treat 500 square feet of lawn. You should always follow the directions on the product label for mixing, safety, and instructions for Atrazine use. Once applied, Atrazine will come into play, attacking weeds through the base and killing underground weed seeds. Within 14-21 days, the existing weeds in your yard will die. Meanwhile, the weed seeds will be destroyed as they germinate for up to 6 weeks. Best of all, your lawn will be proliferating without harm.

Last, Wallx.net sent you details about the topic “How Much Atrazine Per Gallon Of Water [Herbicide Mixing Guide]❤️️”.Hope with useful information that the article “How Much Atrazine Per Gallon Of Water [Herbicide Mixing Guide]” It will help readers to be more interested in “How Much Atrazine Per Gallon Of Water [Herbicide Mixing Guide] [ ❤️️❤️️ ]”.

Posts “How Much Atrazine Per Gallon Of Water [Herbicide Mixing Guide]” posted by on 2021-10-21 10:53:08. Thank you for reading the article at wallx.net