How to shut down traeger grill

Whatever your mannequin, it’s best to turn off your oven using the oven’s off feature.

Why is it necessary to shutdown properly?

Following proper shutdown procedures is especially important for your oven’s maintenance and security as improper shutdowns will result in oven fires and oven fires. It can actually lead to temperature fluctuations in subsequent cooking as well.Burning back and burningBackfire is when the pellets in the drill catch fire and start burning. Whenever you flip the grill without using the shutdown feature, mechanical elements like the drill stop working; while waiting, the fireplace continued to burn at full capacity inside the fireplace. This can lead to warped drills, jammed drills, and oven fires. The innovative shutdown can also prevent the grill from burning all the pellets in the fireplace at the end of your prep dinner. The next time you start baking, there may also be too many pellets in the oven, causing oven burn.

How to turn off your grill

Read more: How to remove rust on the grillGrill WiFIRE-EnabledIf in case you have a grill that supports WiFIRE, you have two options to activate the shutdown cycle.

Turn off the toaster using the oven’s controls.

In case your controller has an illuminated standby button, press it for 3 seconds and the oven will go into the shutdown cycle.
In case your controller does not have a standby button, however, you can flip your controller by briefly pressing the selection button, press it for 3 seconds and then the grill will go into the shutdown cycle .

Turn off the oven using the Traeger app.

Grilled banner faucet on the underside of the app site.

Faucet on Shutdown button

Pull down the heater button to verify the grill is off.

The shutdown cycle on a WiFIRE-enabled grill will last from 15 to 25 minutes depending on the temperature of the grill when it is turned off. As soon as the shutdown cycle is full, the oven will transfer various pellets to the heater to help future cooks. Read more: How to keep the oven brightBake without WiFIREExecuting the correct shutdown cycle on a non-WiFIRE grill is simple.

In case your controller has a temperature knob, flip it to Cycle Shutdown.
In case your controller has buttons, hold the center button for two to three seconds.

Auger Feeding Pellets during shutdown

If in case you have a WiFIRE-enabled grill, the drill will regularly load pellets during shutdown because it helps limit back burn. shutdown cycle. For those, the most typical purpose of that is to swap wires. To possibly solve the problem, make sure that the fan and motor cords are not normally interchanged. This can trigger the fan to stop working during shutdown and the motor will continue to feed pellets. To fix it, verify if the wires are swapped.

Remove and remove the controller from the grill.

Check that the wire colors match on each side of the Molex connector.