How To Build A Blanket Wall Rack
You can design a wall-mounted duvet rack to display your comforter in a number of ways. You can choose to display the entire comforter flat, folded, or you can even fold or pleat. Here is a design of a wall-mounted quilt rack that you can build yourself at home.Step 1 – Cut the woodCut two 1×8 shapes into 32 inches. They will be used as vertical bars. Alternatively, cut four 1X2s to 26 inches to use as horizontal diagonal members.Step 2 – Draw the curveTo get a rounded top for an upright, use the tip of an inverted bucket to scribble a circle. Then, cut the round ends with a circular saw. Since the blade used is very thin, be careful not to break it by turning it vigorously.Step 3 – Sanding the cut pieces of woodUse the belt sander to smooth out the shape of the curves made in Step 2. For your safety, wear goggles and dustproof goggles while using the sander.Step 4 – Hole for the screwRead more: How to tell if a Russian man likes me Mark the locations of the holes for the center recessed screw. To find the exact center, use a square. You need to mark the holes on both the top and bottom.Step 5 – Drill the pocketInsert the drill bit into the drill bit and use it to drill holes 1/4 inch deep. Then drill through the center of the pockets using a 1/8 inch drill bit. They will be used for the screws. Alternatively, drill two holes, at a distance apart and on the same horizontal line, in the back piece of wood to hang on the wall.Step 6 – Screw driveTake the cross members and drill holes into their ends in the center.Step 7 – Attach the piecesDrive the screws into the pilot holes you made in the previous step. The holes on the vertical will line up with the holes on the cross pieces, securing them together. For the other side, repeat the same process.Step 8 – Paint the Quilt Rack
Read more: Transmission Cooler Cleaner Use a good quality paint brush to coat the wood with polyurethane. Be careful that the direction of the brush’s motion matches the grain of the wood.Step 9 – Dry and SandThe milky white appearance of the paint will transform into a cleaner finish as it dries. Once dry, gently rub with fine sandpaper to smooth. Apply another coat of paint to finish your duvet rack after it dries.Step 10 – Drill holes in the wallDrill holes in the wall the same distance as the holes in the back piece of wood. First, mark the holes and make sure they are at the same level and distance, then drill them.Step 11 – Mounting the Quilt RackInsert screws or nails into the holes drilled in the wall and then hang the duvet rack on it. Place the comforter on the shelf for display. Read more: how to start a hair hood business
Last, Wallx.net sent you details about the topic “How To Build A Blanket Wall Rack❤️️”.Hope with useful information that the article “How To Build A Blanket Wall Rack” It will help readers to be more interested in “How To Build A Blanket Wall Rack [ ❤️️❤️️ ]”.
Posts “How To Build A Blanket Wall Rack” posted by on 2021-11-04 14:43:22. Thank you for reading the article at wallx.net
