How To Build A Duck Boat Blind

Two Oregon plumbers have carefully crafted a blind boat ideal and easy to use on a 17-foot TDB duck boat. (Wildfowl photo) In a small blue floodplain off the Willamette River, a flock of mallards drifted in, cupping their wings on a small spreading prey. The two hunters set a trap and jumped out of their seats, completing the blue-headed limit, each with 0.410s. “I was shooting a Winchester Model 42 and my friend had a dual barrel,” says Kurt Rose. “It happened about 12 years ago and was one of many great hunts from my boat blind man. We’ve done all but two of our limit of seven mallards with our 12-shot pistols and will be on a small-barreled shotgun sniping tomorrow morning. It was warm and the river was calm, a blue bird day in October. I scoured this place the day before and found one with no electricity. Those ducks baited without ever knowing we were there. What really made the morning memorable was that they worked so close, we were able to shoot them in .410s. “Read: how to build a blind duck boat

Stick with what you know

Rose is a 72-year-old retired general contractor in Lebanon, Oregon. He hunted the Snake and Willamette rivers from his blind man, which was built in a 17-foot TBD (The Duck Boat) fiberglass boat. His favorite duck gun is a 12 caliber Beretta A303 which is fired with 2 3⁄4 inch steel No 3 bullets. Twelve darts at the top of the Dakota flock make up the mallard composition, with a half-dozen pigeons, gadwalls and wooden ducks thrown to end the spread of a dozen and a half. He’s been hunting since he was 8 years old, when he was accompanied by a 12-year-old friend who knocked down the first wooden duck he saw. “I said. “When I was in my 20s, I hunted tidal islands in the California Delta, jumping ducks from canoes and stooping over mules to hide it from being lured. It looked like we could do better with a john boat, so I bought a 12-foot one and put in some aluminum tube racks to set up a veil of camouflage netting and dowel bars. “Kurt Rose and his hunting partner, Mark Rose (not related), purchased a used 17-foot TBD and removed its pop-up blind part. Mark possesses modest soldering skills and is the duo’s first blinder. When Mark moved, Kurt sold him half of himself. He tried hunting from a 14-foot TBD, but it was too small. Waterfowl hunters who find something they love, whether it’s shotguns, lures, dogs or boats, stick with what works. So in 2000, he bought a long-discontinued 17-foot TBD, drove 6 days to Pennsylvania and came back to pick it up, and spent the nights sleeping in a camping car. Original rusted replacement trailer. He then mounted a 125-horsepower Mercury with a turbocharger, and a 6-inch-tall aluminum plate was added to the crane to mount the engine. When necessary, he also mounts a 4-horsepower Evinrude on the flyover to pick up decoys and find his way across grass since it’s more maneuverable than jet-flying. Two, swivel chairs that fold down on the pedestal can accommodate a pair of hunters. However, Rose often hunts with her male male, Ty. “The engine is controlled by its steering wheel,” he said. “The shape of the boat was perfect. “It has a rounded bow right down to the water so it looks like a mound of grass. The edges are also rounded so it doesn’t have hard corners. Our original blind boat was redone about 14 times and that gave me the idea to create a boat of my own. “

Built for function

Read more: how to distinguish between citrine and topaz The frame is made of ¼” and 3⁄8” steel rods, bent and welded into shape. The 1⁄8” flat steel spacers welded to the rod ends are bolted to the boat passages in various positions. An upper center cap about four feet long swings toward the snap on armored tubes around the bar frame. The air shocks aid in flipping it up and down. When closed, it leaves two snap ports, one front and one rear. The same visors at the front and rear of the torsion springs have been adjusted so that the hunter can simply bump his head against them and they will open. When open, they stop parallel to the surface of the water, creating racks to stack the lures as they are picked up. Galvanized steel fence with 2” x 4” welded mesh covering the frame. The wire ends are cut long enough to wrap around the frame at least twice. A canvas leather cover is attached with a zip fastener. A skirt extends to the waterline on each side. The length of the PPE pipe with racks at each end fitted to the factory contours makes lifting the skirt a breeze. Elastic straps with hooks through the eyelines hold the skirt up. Lifting skirts will prevent ice from accumulating on them. Tarpaulin is painted with Parker Duck Boat Paint and aerosol paints in flat colors.Thick, knotted hemp ropes hang loosely to provide easy access to predators. (Wildfow photo) Palm kernel shells, reeds and raffia complete the outer camouflage. The seed pods are so durable they last at least six years, even when the boat is towed at highway speeds. A raffia-trimmed cover fabric conceals the topqa.info frame with double doors at the bow and stern, rotating on steel sleeves. The door hangs hemp rope knotted from the top edge of the section to allow access for the dog. The dog usually comes from the bank, but sometimes uses a Rose dog ladder made of antique aluminum. Knotted hemp ropes were also hung from the bow to hide the silhouette of the bow. He uses a pole saw to cut overhanging willows that might interfere with shooting. “Sometimes floating weeds build up on the lures that can move them with strong electrical currents,” says Rose. “A great trick to prevent that is to place a willow branch upstream. Grass collected on willow branches instead of bait. “Read more: how to dye hair with conditioner