How To Clean Bottom Of Pool Without Vacuum

Video How to clean the bottom of a pool without a vacuum Whether your pool is in the ground or above ground, cleaning the pool is basically the same. Both will require a repeated filter pump and vacuum if there are other debris that you need to remove. However, if you don’t have tools (or just one of them) and want to keep it clean, you can use the method we discuss below. Depending on the type of dirt in your pool, you can use leaf rakes, tennis balls, pool filtration systems, brushes, and others. to use the selected method for best results. Keep in mind that you may need to use a combination of methods to get the right results for your pool.

1. Swimming pool filter system: most types of Dirt

Contents

The most effective method to treat dirt and debris in water is a pump filter system. It can be a sand filter or a cartridge filter or another. It handles both large and small particles, including those not visible to the eye. .Clean swimming pool

2. Cleaning by shock method

The shock method does a great job at cleaning and removing algae and debris from your swimming pool. Basically, it balances the level of free chlorine to kill algae and bacteria in the pool. For this one you need the following:

Shock calcium hypochlorite swimming pool
A bucket
Glasses
Gloves

Follow these steps:Step 1: In a bucket of water, add one pound of calcium hypochlorite and mix until homogeneous. Read more: How to draw Abs – Step by step instructionsStep 2: Add to the pool in areas most affected with algae or bacteria.Step 3: Let the pool run for 12 hours (half a day) to mix the shock with the water properly. The water will turn cloudy during this stage.Step 4: After 12 hours, add a pool cleaner to remove turbidity in the water. You can also simply leave the pool running for another day to clean the water. What you will do is shock the algae and bacteria by changing the pH of the water so that the microorganisms see that it is not useful for their survival.

3. Tennis ball: Dirt

Tennis balls tend to absorb greasy dirt that floats and mixes with the water. These can be actual oils, lotions and other skin care products from swimmers, and chemicals like insect repellents used by swimmers or around the pool. Over time, they will attract oils and chemicals towards them. You can then take them off, gently clean the balls, dry them and throw them back in the pool or play tennis with them. You can also throw them away as they are not too expensive.

4. Broom: Dirt inside the Walls and Floors of the Pool

Depending on the type of surface in your pool, you can use a brush to scrape it off with or without water in it. If the pool has a soft vinyl liner, you’ll use a rubber or nylon brush to keep it clean. If the pool has concrete floors and walls a stiff, stiff brush will do the trick, in this case use the wall brush in a repetitive motion to remove dirt. and float it. Once done, you need to clean it from the water using other methods. If you have a filter pump running and dirt doesn’t settle on the bottom of the pool, it will do it for you. You may also need to sweep away dirt from the bottom of the pool with a suitable tool, and as you brush the walls and floors of the pool, you should also sweep ladders, steps, and any other objects in the water.

5. Rake leaves: Large crumbs do not melt

Read more: how to attach a surfboard to the roof rack Large debris that sinks to the bottom or floats around the pool is easily removed using a leaf rake. For best results, choose a plastic that won’t scratch the bottom or sides of the tank. Once you’ve got the splinter in an angle or other suitable location, remove it with an appropriate tool.

6. Dust: Dirt and sedentary

For dirt deposited on the bottom of a pool, a dustbin can do the trick. You will have to dive underwater to push the dirt onto the dustbin and then slowly emerge with it. If you make quick movements when dirt collects on the dust tray, it will only move back into the water around you.

7. Skimmer Net: Floating Dirt and Debris

Mesh skimmers are best used for dirty pools that do not dissolve into water. These include petals, leaves, pieces of wood and others. Such dirt must be removed before they rot and break down into small pieces that are difficult to remove.Grid and brush

8. Hands

Sometimes floor debris should be removed by hand because, unlike a sweeper, hands won’t let dirt back into the water. The same is true for floating dirt such as leaves and petals. For best results, you’ll need to combine them. This way, you can be sure that you have dealt with all kinds of contaminants in the water. Turn off the inlet and outlet. This way, no stream of water will inadvertently cause a wave to propagate dirt if you have drawn it to one side of the pool.Blue wave Rectangle on the ground Swimming pool

How to prevent swimming pool from getting dirty?

The surest way to keep the pool clean is to keep the lid on. Every time you need to go swimming or relax in the pool, sweep the top of the cover before removing it to prevent dirt from getting into the water. is necessary. You can always count on a filter pump to keep the pool clean. Combine it with the other methods discussed here for a sparkling clean pool.Read moreRead more: how to remove the vinegar taste in pickles