How To Connect Rgb Fans To Motherboard

You don’t need hardware expertise to connect the RGB fan to the Motherboard. With proper research and basic knowledge, it can be done easily. You can manage the RGB fan connection to the motherboard with the help of this article. However, putting yourself in a dead end without knowledge makes no sense. Therefore, read the instructions before you jump into the mechanism.

Always place RGB fans and their components in a safe place.
Make sure the RGB fan is far away from high temperature machines (such as heaters) or places with high temperatures.
Keep the RGB fan at a distance from the fan blades.
Do not modify any wiring or connections for the test.
Do not use the fan outside the computer case.
Keep it safe from any kind of liquid.
Keep your computer case dust-free.
Last but most importantly, keep your system powered off until the installation is done.

RGB fans come in different varieties, whether you buy it, come with a carrying case, or come pre-installed.

How to apply heat glue and how does it work
How to free up space on Windows 10?

Steps to connect RGB Fan to Motherboard

Contents

There are three types of RGB fans that can be connected to the motherboard.

RGB 3-pin fan
4-pin RGB fan
Motherboard without header

With 3-pin and 4-pin fans you don’t need spare tools to connect them while a headerless motherboard will need some tools for the connection to work. very good to go.

Connecting the 3-pin RGB Fan

RGB 3-pin fan is also known as DC fan. These RGB fans are voltage controlled and simpler and cheaper. Fans like this make more noise. Read more: How to make fifi The 3-pin RGB fan connection method is only applicable if you have three cables in the connector. Usually, a 3-pin fan connector is smaller than a 4-pin fan connector. It has three square holes on the front and three strings on the back. These pins are black for ground, red for power, and yellow for the speed sensor, respectively.Also, note that you can connect a 3-pin fan to a 3-pin or 4-pin header on the motherboard. It will work the same in both cases. Before continuing, don’t forget to turn off the power button.Follow the steps to install the 3-pin RGB fan.

Remove the case.
Always read the instructions provided in the manual that came with the packaging. Whether you are a novice or an experienced person, you should not avoid the manual.
Usually, manufacturers label the slots/ports. Therefore, you can easily find out the RGB sign. It is written there.
Take out your RGB fan and the bracket provided in it. Now connect the RGB fan connector with two busbars. Connect it to the fan headers on the motherboard.

Press tight enough for it to connect properly.

Connecting 4-pin RGB Fan

The 4-pin RGB fan is also known as a pulse width modulation (PWM) fan. Such fans are significantly stronger and have a higher RPM. 4-pin fans are widely used because users have better control over them. These types of fans are superior to others because they are quiet and operate quietly. The 4-pin RGB fan connection method only applies if you have four cables in the connector. You can’t put them in a triple cable in the connector. Thereby, it has 4 square holes on the front and 4 wires on the back, also note that you can connect the 4-pin fan to the 3-pin header on the motherboard. However, it will run at full speed. Read more: how to make cookies in the microwaveFollow the steps to install the 4-pin RGB fan.

Remove the case.
Always read the instructions provided in the manual that came with the packaging. Whether you are a novice or an experienced person, you should not avoid the manual.
Usually, manufacturers label the slots/ports. Therefore, you can easily find out the RGB sign. It is written there.
Now, insert the 4-pin RGB fan connector into the fan header on the motherboard.

Press tight enough for it to connect properly.

Now that the connections are made, let’s customize the RGB fan. You can place the RGB fan on the back of the case or on the front so the lights are visible. Make sure to close the box properly.

Connect RGB fan to motherboard without header

The method of connecting an RGB fan to a motherboard without a header is quite different from the two methods above. To have such a connection, you need to bring all the tools in one place.Tools: The RGB fan controller comes with a dual four-pin connector and a power cable.Follow the steps to connect RGB fan to motherboard without header.

Open case.
Bring a dual 4-pin connector. It is an essential tool for a headerless motherboard.
Now, plug the 4-pin dual connector into the RGB fan’s pin-slot cable.
Then, the slot-cable has a way to connect, you plug the other end into the controller of the RGB fan.
The other end of the controller has a power input slot (a small one) to connect it to the power cable.
You can see that the power cable has another end dedicated to connecting to the power supply’s SATA cable. The SATA cable powers the RGB fan at the time of operation.

Now that the connections are made, place the fan and wires inside the case. Make sure to close the box properly.

Benefits of RGB Fan

The biggest benefit is that you can connect the RGB fans to the motherboard yourself. RGB fans are very important in PC. They can control the temperature on the CPU by keeping it cool. You can even buy commercially available remote control RGB fans.

Last, Wallx.net sent you details about the topic “How To Connect Rgb Fans To Motherboard❤️️”.Hope with useful information that the article “How To Connect Rgb Fans To Motherboard” It will help readers to be more interested in “How To Connect Rgb Fans To Motherboard [ ❤️️❤️️ ]”.

Posts “How To Connect Rgb Fans To Motherboard” posted by on 2021-10-22 03:32:09. Thank you for reading the article at wallx.net