How To Cover A Mirror Wall
One of the biggest challenges in Makeup combination office and living room modernizing a mirrored wall that screams “hello, this is 1980”. OK, obviously it doesn’t really scream that, but it might as well! Of course I was thinking of completely removing the mirrored wall. But when I researched how to do that, I decided that it was too much work and that fixing the wall would be too expensive for what I wanted to spend at the moment.
Supplies needed to modernize a reflective wall with tape
Contents
This post contains affiliate links. To read my full disclosure policy, please click here.
- Wall mirror or closet door with mirror. Really, any reflective surface that you don’t want to be a “mirror eye” anymore.
- Black vinyl tape. For this project, I used 3/4″ vinyl tape and 1/4″ vinyl pipe tape.
- White or silver pencil
- Level
- Scissors
Read more: how to add a crossbody strap to a tote bag
How to update a mirrored wall with tape
First thing, I removed all the artwork my kids had pasted on the mirror, then I cleaned it with Windex. Even if you don’t have kids artwork stuck to your mirrored wall, you should definitely clean it up before you start.
Step one: Cover the mirror wall frame with tape
For this part of the project, I used 3/4″ vinyl tape because the frame around the mirror is only about 3/4″ wide. If you decide to do this project, measure the mirror frame before ordering the tape. You may need a different tape width than the one I used, depending on your mirror frame width.
Step two: Cover vertical mirror gaps with tape
Then I used black tape to cover each vertical space between the mirror walls.The mirror looks better already!
Step 3: Create extra ribbon lines
Now here’s where things get a little more interesting: creating a secondary runway on the mirror. First, I tried measuring a few inches down from the top runway, drawing a horizontal line, and then covering it with duct tape. It didn’t work at all! It’s really hard to get anything straight.Read more: how to submit photos on tinder | Top Q & ASo, working with each mirror at a time, I took the level and placed it just below the piece of tape at the top of the mirror frame. I made sure that the top of the level aligns with the bottom of the tape, then I drew a line with crayons along the bottom edge of the level. Then I covered that line with 1/4 inch vinyl tape.


Modern mirror wall finished
I mean, I don’t know about you, but I really like this mirror wall! I don’t even think I fooled myself into thinking it was beautiful. I’m pretty sure it actually looks GOOD! It’s amazing how subdividing those panels did this.

Last, Wallx.net sent you details about the topic “How To Cover A Mirror Wall❤️️”.Hope with useful information that the article “How To Cover A Mirror Wall” It will help readers to be more interested in “How To Cover A Mirror Wall [ ❤️️❤️️ ]”.
Posts “How To Cover A Mirror Wall” posted by on 2021-10-31 04:44:26. Thank you for reading the article at wallx.net






